7H13 24V B2 150 mm Heavy-Duty A/C Compressor for Kato second-generation crane application

Wholesale 7H13 A/C Compressor for Kato second-generation crane application

Jobsite repairs leave little room for a second freight cycle, which makes the physical identity of this Kato second-generation crane application compressor important at quotation stage. For Kato second-generation crane application maintenance where jobsite downtime and wrong-fit freight must be controlled, Elecdura supplies this complete 7H13 compressor with B2 150 mm 24V 7H13 configuration. The stated 24V, B2 and 150 mm configuration remains the reference for quotation, packing and repeat stock.

The commercial value is clarity at handover: purchasing sees Kato second-generation crane application, the warehouse sees 24V, B2 and 150 mm, and the workshop sees the visible mounting layout. Those details allow the aftermarket purchasing team to assess the whole assembly before it enters stock.

Kato second-generation crane application A/C Compressor Data for Fleet Buyers

For stock control, retain 24V, B2 and 150 mm with the Kato second-generation crane application and the complete-assembly description. Shortening the line to 7H13 alone removes the details most likely to separate two look-alike units for Kato second-generation crane application. Vehicle-system values not shown in the table are confirmed from the specific service documentation for Kato second-generation crane application with 24V, B2 and 150 mm.

Distributor Fitment Check for the Kato second-generation crane application A/C Compressor

Photograph the compressor in the Kato second-generation crane application installation before removal, then take separate bench views of the pulley, electrical lead, hose head and mounting ears. The aftermarket purchasing team can compare the offered 7H13 assembly with the features that control installation.

Compare the pulley, clutch voltage, connector, hose ports and complete mounting geometry for Kato second-generation crane application. Record the result beside 24V, B2 and 150 mm and the Kato second-generation crane application so receiving can use the same evidence as purchasing.

Importer Comparison Notes for the Kato second-generation crane application A/C Compressor

Keep adjacent 7H13 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Kato second-generation crane application. For Kato second-generation crane application stock, this difference needs its own reference image and order description. The body family alone does not protect the buyer from warehouse mis-picks for Kato second-generation crane application with 24V, B2 and 150 mm.

Repeat Kato second-generation crane application orders should carry the same product image and configuration used for the original approval. That record is more dependable than choosing from a shelf of compressors by housing shape alone for Kato second-generation crane application with 24V, B2 and 150 mm.

Fleet Handling Checks for the Kato second-generation crane application A/C Compressor

Receiving should use the same Kato second-generation crane application evidence that purchasing approved. That means the product image, the 7H13 identification and 24V, B2 and 150 mm, followed by a visual check for impact damage or missing protective caps.

The old-unit failure provides useful service evidence. Before fitting the 24V, B2 and 150 mm replacement to Kato second-generation crane application, inspect the belt path, hoses, airflow and circuit condition and correct the fault that could damage the new compressor.

Distributor RFQ Details for This 7H13 A/C Compressor

For regional importers, the Kato second-generation crane application can be combined with other confirmed heavy-duty compressor lines in one shipment. Each physical build retains its own image, quantity and receiving note through packing in the Kato second-generation crane application 24V, B2 and 150 mm order.

the Kato second-generation crane application RFQ should let the supplier understand both the part and the program; the 24V, B2 and 150 mm specification remains the purchase reference. Combine the Kato second-generation crane application fitment details with volume, destination, delivery window and packaging expectations, then attach the confirmed physical views.

Importer FAQ for This 7H13 A/C Compressor

For this 7H13 build, buyers usually need clear answers on physical identity, variant control, packing and service preparation.

What wrong-stock risk applies to this B2 7H13 compressor?

Keep adjacent 7H13 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Kato second-generation crane application. The distinction should remain visible from RFQ through receiving, even when both compressors share familiar castings in the Kato second-generation crane application 24V, B2 and 150 mm order.

What receiving checks apply to this B2 7H13 compressor?

Match the delivered 7H13 compressor with the reference image and receiving note. Check the clutch and exposed mounting points for transit contact before binning during the Kato second-generation crane application 24V, B2 and 150 mm review.

Is the 7H13 family number enough to confirm fitment?

The family number is useful for enquiry routing, not final approval in the Kato second-generation crane application 24V, B2 and 150 mm order. This Kato second-generation crane application order still depends on 24V, B2 and 150 mm and the confirmed head and mounting arrangement.

What identifies this Kato second-generation crane application A/C compressor?

Start with Kato second-generation crane application and 7H13; finish the identification with 24V, B2 and 150 mm and the visible head and mounting layout. For Kato second-generation crane application, this keeps a similar compressor from inheriting the order by name alone.

Why must the B2 150 mm clutch stay on the RFQ?

Keeping the clutch on the RFQ lets the supplier compare the actual drive rather than only the 7H13 family. It also gives receiving a measurable feature to check.

Can this Kato second-generation crane application compressor use private-label packing?

Private-label presentation is available for suitable wholesale orders. It changes packaging and marking, not the confirmed 24V, B2 and 150 mm compressor build.

What should a wholesale RFQ include for this 7H13 compressor?

State the 7H13 application, required volume, shipping country and delivery target for Kato second-generation crane application with 24V, B2 and 150 mm. Attach the reference photos and note any neutral or buyer-brand packing request for Kato second-generation crane application.

Which photos help confirm this Kato second-generation crane application compressor?

Photograph the old 7H13 unit before and after removal. Those images should reveal belt alignment, port direction, connector position and the way it mounts to Kato second-generation crane application.

Ask for Bulk Pricing on the 7H13 A/C Compressor

For a wholesale quote, provide the Kato second-generation crane application, 7H13, 24V, B2 and 150 mm, quantity and shipping country. Add the reference photos so Elecdura can review the visible fitment points before discussing delivery and packing for Kato second-generation crane application. A clear first enquiry also gives both parties a dependable reference if the Kato second-generation crane application compressor moves from sample evaluation into regular supply.