Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
//
//
7H15
Liebherr
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
7H15 24V 6PK 119 mm configuration
Liebherr construction equipment / Tongli mining truck 6PK version
Liebherr construction equipment / Tongli mining truck 6PK version; confirm 7H15, 24V, 6PK 119 mm, connector, ports and mounting; compare the pulley, clutch voltage, connector, hose ports and complete mounting geometry
| Quantity: | |
|---|---|
Jobsite repairs leave little room for a second freight cycle, which makes the physical identity of this Liebherr construction equipment / Tongli mining truck 6PK version compressor important at quotation stage. This complete 7H15 replacement uses 6PK 119 mm 24V 7H15 configuration. For Liebherr construction equipment / Tongli mining truck 6PK version maintenance where jobsite downtime and wrong-fit freight must be controlled, the 24V, 6PK and 119 mm clutch, head and mounting arrangement define the physical build a buyer is ordering.
The commercial value is clarity at handover: purchasing sees Liebherr construction equipment / Tongli mining truck 6PK version, the warehouse sees 24V, 6PK and 119 mm, and the workshop sees the visible mounting layout. Those details allow the fleet parts team to assess the whole assembly before it enters stock.
Application | Liebherr construction equipment / Tongli mining truck 6PK version |
|---|---|
Compressor model | 7H15 |
Pulley / clutch | 6PK and 119 mm |
Clutch voltage | 24V |
Supply form | Complete aftermarket A/C compressor assembly |
Supplied configuration | 6PK 119 mm 24V 7H15 configuration |
Read the drive as a set: 24V, 6PK and 119 mm describe this complete 7H15 build for Liebherr construction equipment / Tongli mining truck 6PK version with 24V, 6PK and 119 mm. Treating any one of those values as an optional choice can create repeat freight. The remaining circuit-level service data belongs to the exact Liebherr construction equipment / Tongli mining truck 6PK version system.
Photograph the compressor in the Liebherr construction equipment / Tongli mining truck 6PK version installation before removal, then take separate bench views of the pulley, electrical lead, hose head and mounting ears. The fleet parts team can compare the offered 7H15 assembly with the features that control installation.
Compare the pulley, clutch voltage, connector, hose ports and complete mounting geometry for Liebherr construction equipment / Tongli mining truck 6PK version. The same review needs to agree with 24V, 6PK and 119 mm. A conflict at either point calls for clarification before the fleet parts team approves a substitute.
Keep adjacent 7H15 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Liebherr construction equipment / Tongli mining truck 6PK version. That is the practical boundary between this Liebherr construction equipment / Tongli mining truck 6PK version product and the nearest look-alike; the 24V, 6PK and 119 mm specification remains the purchase reference. Purchasing can preserve it by retaining the configuration on the purchase record.
For a mixed-model shipment, state the quantity of this 7H15 configuration independently. That gives the packer a specific image and description and reduces the chance of repeat freight.
The warehouse can inspect this Liebherr construction equipment / Tongli mining truck 6PK version assembly without opening the sealed ports. Confirm 24V, 6PK and 119 mm, then compare the visible head and feet with the reference image. A damaged or conflicting compressor remains outside available stock until reviewed for Liebherr construction equipment / Tongli mining truck 6PK version with 24V, 6PK and 119 mm.
A fleet replacement is ready to install only after the surrounding circuit is ready for Liebherr construction equipment / Tongli mining truck 6PK version with 24V, 6PK and 119 mm. For Liebherr construction equipment / Tongli mining truck 6PK version, inspect the belt, hoses, condenser airflow and contamination risk before putting the new 7H15 compressor into service.
For regional importers, the Liebherr construction equipment / Tongli mining truck 6PK version application can be combined with other confirmed heavy-duty compressor lines in one shipment. Each physical build retains its own image, quantity and purchase record through packing.
The shortest route to an accurate quote is a complete line: Liebherr construction equipment / Tongli mining truck 6PK version, 7H15, 24V, 6PK and 119 mm, quantity and destination. Attach clutch, head, connector and mounting views for the supplier's comparison for Liebherr construction equipment / Tongli mining truck 6PK version.
The questions below address the fitment and purchasing details most likely to affect a Liebherr construction equipment / Tongli mining truck 6PK version wholesale order.
Belt section, groove count and diameter affect alignment on Liebherr construction equipment / Tongli mining truck 6PK version. A nearby pulley cannot be accepted simply because the 7H15 housing looks familiar.
The purchase record should carry Liebherr construction equipment / Tongli mining truck 6PK version, 7H15, 24V, 6PK and 119 mm and a reference image. Together they give purchasing and receiving the same product definition for Liebherr construction equipment / Tongli mining truck 6PK version with 24V, 6PK and 119 mm.
Confirm that Liebherr construction equipment / Tongli mining truck 6PK version supplies the stated clutch voltage and that the connector agrees with the product image. Record the result with the complete 24V, 6PK and 119 mm description.
Provide Liebherr construction equipment / Tongli mining truck 6PK version, 24V, 6PK and 119 mm, quantity, destination and packing requirements. Include old-unit views that show the clutch, head, connector and mounts for Liebherr construction equipment / Tongli mining truck 6PK version.
Keep adjacent 7H15 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Liebherr construction equipment / Tongli mining truck 6PK version. The distinction should remain visible from RFQ through receiving, even when both compressors share familiar castings in the Liebherr construction equipment / Tongli mining truck 6PK version 24V, 6PK and 119 mm order.
Private-label presentation is available for suitable wholesale orders. It changes packaging and marking, not the confirmed 24V, 6PK and 119 mm compressor build.
Hose routing has limited space around the Liebherr construction equipment / Tongli mining truck 6PK version installation. the confirmed Liebherr construction equipment / Tongli mining truck 6PK version product needs the connection side shown in the reference photographs, not merely a compatible body family; the 24V, 6PK and 119 mm specification remains the purchase reference.
Send the clutch face, port block, connector, both mounting sides and one Liebherr construction equipment / Tongli mining truck 6PK version installed overview. Separate angles are easier to compare than a single collage during the Liebherr construction equipment / Tongli mining truck 6PK version 24V, 6PK and 119 mm review.
A first enquiry should include separate clutch, head, connector and mounting photographs plus the commercial requirements in the Liebherr construction equipment / Tongli mining truck 6PK version 24V, 6PK and 119 mm order. Repeat buyers can reference the confirmed purchase record when requesting the next 7H15 shipment. Once the physical match is accepted, the same purchase record can support purchasing, receiving and future distributor replenishment.
