7H15 24V 8PK 119 mm Heavy-Duty A/C Compressor for Dongfeng Tianjin KR truck

Fleet Replacement 7H15 A/C Compressor for Dongfeng Tianjin KR truck

A distributor supporting Dongfeng Tianjin KR truck fleets needs the complete drive and mounting description before the unit reaches the workshop. For Dongfeng Tianjin KR truck fleet replacement, regional distributor replenishment and mixed-model heavy-truck A/C stock, Elecdura supplies this complete 7H15 compressor with 8PK 119 mm 24V 7H15 configuration. The stated 24V, 8PK and 119 mm configuration remains the reference for quotation, packing and repeat stock in the Dongfeng Tianjin KR truck 24V, 8PK and 119 mm order.

The commercial value is clarity at handover: purchasing sees Dongfeng Tianjin KR truck, the warehouse sees 24V, 8PK and 119 mm, and the workshop sees the visible mounting layout. Those details allow the service-parts buyer to assess the whole assembly before it enters stock.

Dongfeng Tianjin KR truck A/C Compressor Data for Fleet Buyers

The table describes one saleable assembly rather than a menu of interchangeable options for Dongfeng Tianjin KR truck with 24V, 8PK and 119 mm. On this Dongfeng Tianjin KR truck line, 24V belongs with the 8PK clutch and 119 mm diameter. System charge and oil values that are not published here remain subject to the approved service data for the exact installation for Dongfeng Tianjin KR truck with 24V, 8PK and 119 mm.

Distributor Fitment Check for the Dongfeng Tianjin KR truck A/C Compressor

A good approval set answers four physical questions: how the belt meets the clutch, where the connector sits, which way the ports face and how the compressor bolts to Dongfeng Tianjin KR truck. The compressor angle shots should make each answer visible without a collage.

Compare the pulley, clutch voltage, connector, suction and discharge ports and complete mounting geometry for Dongfeng Tianjin KR truck. This Dongfeng Tianjin KR truck product-specific detail, together with 24V, 8PK and 119 mm, is what separates a useful fitment review from a generic 7H15 lookup.

Importer Comparison Notes for the Dongfeng Tianjin KR truck A/C Compressor

Keep nearby 7H15 versions with another voltage, pulley, port direction or mounting layout on separate stock lines for Dongfeng Tianjin KR truck. A buyer who records that boundary can discuss alternatives without allowing a similar housing to replace the agreed Dongfeng Tianjin KR truck configuration.

Alternative references can be useful for search, but they should lead back to the confirmed Dongfeng Tianjin KR truck build; receiving should use the 24V, 8PK and 119 mm reference. The service-parts buyer still needs the clutch, head and mounting evidence before merging any stock lines.

Wholesale A/C Compressor Handling for Dongfeng Tianjin KR truck

Incoming inspection for this 7H15 line can be short and specific: verify the Dongfeng Tianjin KR truck application, 24V, 8PK and 119 mm and the visible mounting layout. Those observations protect the Dongfeng Tianjin KR truck distributor's stock record and any later fleet claim; the 24V, 8PK and 119 mm specification remains the purchase reference.

A fleet replacement is ready to install only after the surrounding circuit is ready for Dongfeng Tianjin KR truck with 24V, 8PK and 119 mm. For Dongfeng Tianjin KR truck, inspect the belt, hoses, condenser airflow and contamination risk before putting the new 7H15 compressor into service.

Bulk Dongfeng Tianjin KR truck A/C Compressor Supply for Distributors

Elecdura supports wholesale enquiries for this 24V, 8PK and 119 mm compressor, from initial evaluation to planned regional replenishment. Neutral or private-label presentation is available for suitable programs once the Dongfeng Tianjin KR truck fitment has been approved.

When requesting a sample, identify the target Dongfeng Tianjin KR truck and the expected annual demand. The same Dongfeng Tianjin KR truck enquiry can state whether the buyer needs neutral packing, branded labels or consolidation with other compressor models, with 24V, 8PK and 119 mm retained on the stock record.

Wholesale 7H15 A/C Compressor Questions from Buyers

Before quantity is committed, these answers help the buyer connect 24V, 8PK and 119 mm with fitment evidence and ordering requirements.

Which photos help confirm this Dongfeng Tianjin KR truck compressor?

Photograph the old 7H15 unit before and after removal. Those images should reveal belt alignment, port direction, connector position and the way it mounts to Dongfeng Tianjin KR truck.

Why must the 8PK 119 mm clutch stay on the RFQ?

Belt section, groove count and diameter affect alignment on Dongfeng Tianjin KR truck. A nearby pulley cannot be accepted simply because the 7H15 housing looks familiar for Dongfeng Tianjin KR truck with 24V, 8PK and 119 mm.

Can this Dongfeng Tianjin KR truck compressor use private-label packing?

Private-label presentation is available for suitable wholesale orders. It changes packaging and marking, not the confirmed 24V, 8PK and 119 mm compressor build.

What identifies this Dongfeng Tianjin KR truck A/C compressor?

Use Dongfeng Tianjin KR truck, 7H15 and 24V, 8PK and 119 mm together. Add the reference image and the mounting or port detail used to accept this physical build for Dongfeng Tianjin KR truck.

What wrong-stock risk applies to this 8PK 7H15 compressor?

Keep nearby 7H15 versions with another voltage, pulley, port direction or mounting layout on separate stock lines for Dongfeng Tianjin KR truck. Treat that neighboring unit as a different product rather than an automatic 7H15 interchange for Dongfeng Tianjin KR truck.

What workshop checks apply before fitting this 8PK 7H15 compressor?

Fitment approval is only the first step. The workshop also needs the exact application service data and a clear reason for the old compressor's failure for Dongfeng Tianjin KR truck with 24V, 8PK and 119 mm.

What should a wholesale RFQ include for this 7H15 compressor?

Provide Dongfeng Tianjin KR truck, 24V, 8PK and 119 mm, quantity, destination and packing requirements. Include old-unit views that show the clutch, head, connector and mounts for Dongfeng Tianjin KR truck.

How should a buyer confirm the 24V clutch?

Use the old-unit connector and Dongfeng Tianjin KR truck electrical data as two checks; this order is for the 24V, 8PK and 119 mm version. The 24V clutch is confirmed with this 7H15 build, not as a stand-alone option during the Dongfeng Tianjin KR truck 24V, 8PK and 119 mm review.

Request a Wholesale 7H15 A/C Compressor Quote

For a wholesale quote, provide the Dongfeng Tianjin KR truck application, 7H15, 24V, 8PK and 119 mm, quantity and shipping country. Add the compressor angle shots so Elecdura can review the visible fitment points before discussing delivery and packing. The result is a quotation built around the confirmed 24V, 8PK and 119 mm compressor rather than a broad family description in the Dongfeng Tianjin KR truck 24V, 8PK and 119 mm order.