0001263501 Shangqi Starter Motor 24V 7.5kW 12T

0001263501 Heavy-Duty Starter Motor for SHANGQI F2CE0681C 8052

For importers requesting production pricing, Elecdura offers 0001263501 as an aftermarket heavy-duty starter motor for SHANGQI F2CE0681C 8052. The 24V, 7.5kW and 12T configuration is intended for professional replacement sourcing by heavy-duty parts distributors, importers and fleet suppliers.

For inventory buyers planning replenishment, the product is positioned for professional aftermarket supply, with product identification, fitment boundaries, inspection options and commercial terms visible before the buyer requests pricing.

0001263501 Starter Motor Specifications and Technical Drawing

For engine-parts specialists reviewing a replacement proposal, the product identity combines 0001263501, SHANGQI F2CE0681C 8052, 24V, 7.5kW and 12T. Keeping those facts together helps buyers separate this starter from adjacent versions.

For fleet-parts buyers confirming the stated application, the source-faithful technical drawing records the available mounting information for 0001263501; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

0001263501 Aftermarket Replacement and Application

For maintenance suppliers reviewing drive-end geometry, send 0001263501, 5801314484, the full SHANGQI F2CE0681C 8052 description and photos of the starter being removed. These details allow the quotation to stay product-specific when related numbers appear on more than one housing version.

For equipment-parts dealers comparing nearby starter versions, do not merge a comparable-looking unit into this order only because the main number is related. The 12T drive, module 3.175, flange and terminals should agree with the version shown here.

0001263501 Wholesale Supply for Distributors and Importers

For purchasing teams confirming an incoming batch, Elecdura supports repeat-order and new-line sourcing for 0001263501. Commercial planning can cover a 20 pcs MOQ, 7–15 day lead time subject to confirmation, neutral packaging or private-label review, and an 18-month agreed warranty.

For distributors preparing a volume quote, the order specification may include armature, solenoid, no-load or load testing together with label and packaging requirements. This gives receiving teams practical points for sampling a batch without treating appearance alone as proof of fitment.

0001263501 Starter Motor Buyer FAQ

How should a workshop distinguish locating diameter during an application review?

For replacement-parts sellers comparing nearby starter versions, no locating diameter is published for 0001263501. Measure the old starter at the flange shoulder with a caliper and photograph the measuring points. Combine that value with the hole pattern and pinion projection before quoting, because a visually close flange can still center the drive differently and should not inherit dimensions from another model.

What should purchasing verify first for mounting face, locating shoulder and bolt positions for a first bulk order?

For service-parts networks preparing a technical RFQ, use the supplied technical drawing to compare mounting face, locating shoulder and bolt positions. Take each measurement from the same face shown or described, then compare the locating shoulder, bolt pattern and drive-end projection as one set. A single matching diameter is not enough if the hole pattern or axial reach places the pinion differently.

Which specification deserves priority for 0001263501 solenoid and cable routing before accepting a substitute?

For importers checking version-defining data, use the side and rear photographs of 0001263501 to check solenoid position, battery-stud direction and start-terminal access in SHANGQI F2CE0681C 8052. Cables should reach without stretching, sharp bends or contact with hot and moving parts. If the customer's old unit is clocked differently, request an installed photo before the order is assigned.

What should purchasing verify first for 0001263501 order testing when confirming the offer line?

For inventory buyers confirming commercial terms, Elecdura can discuss armature, solenoid, no-load and load testing for 0001263501. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 7.5kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

How can a buyer screen 0001263501, 5801314484 when confirming the quoted item?

For maintenance suppliers reviewing a replacement proposal, 0001263501, 5801314484 should be treated as one inquiry group only after the starter being replaced is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate offer line instead of assuming that the shared number guarantees interchangeability.

What evidence best identifies 0001263501 side-profile photograph during an application review?

For equipment-parts dealers confirming the stated application, the side profile of 0001263501 shows body length, solenoid placement and the relationship between flange and drive. Compare it with a square side view of the removed starter, then use measured axial references where available. This angle helps reveal a housing or projection difference that a front-only photograph can miss.

What should purchasing verify first for SHANGQI F2CE0681C 8052 cranking condition when confirming the quote position?

For purchasing teams checking application evidence, before replacing the starter on SHANGQI F2CE0681C 8052, test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 24V, 7.5kW starter and make a fitment check easier to resolve.

Which detail separates module 3.175 for warehouse identification?

For distributors preparing an OE-based quote, module 3.175 is part of the gear geometry for 0001263501. Confirm it together with the 12-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

Request a Wholesale Quote for 0001263501 Heavy-Duty Starter Motor

For aftermarket product managers confirming commercial terms, provide 0001263501, SHANGQI F2CE0681C 8052, expected order quantity and destination. Include photos or measurements when the starter being replaced differs in suffix or mounting appearance, and Elecdura will review the correct version before pricing.