ELECDURA NETWORK
Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
10PA15C
Daewoo / Doosan
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
10PA15C 24V A1 142 mm configuration
Daewoo / Doosan DH80-J excavator
Daewoo / Doosan DH80-J excavator; confirm 10PA15C, 24V, A1 142 mm, connector, ports and mounting; confirm the A-section pulley and DH80-J mount
| Quantity: | |
|---|---|
The old 10PA15C compressor is the best fitment reference while the bracket, belt and hoses are still in their installed positions.
Use the photos to confirm the A-section pulley and DH80-J mount, then compare the A1 belt path and 24V connection without treating either as an optional variation.
| Application | Daewoo / Doosan DH80-J excavator |
|---|---|
| Compressor model | 10PA15C |
| Pulley / clutch | A1, 142 mm |
| Clutch voltage | 24V |
| OE / reference | Not specified |
| Replacement type | Complete aftermarket A/C compressor assembly |
| Mounting check | confirm the A-section pulley and DH80-J mount |
The 24V coil is the electrical boundary for this Daewoo / Doosan DH80-J excavator item; the removed-unit connector should support that reading before stock is released. For commissioning data beyond the table, the workshop should use the documentation for the exact Daewoo / Doosan DH80-J excavator machine or truck.
A fleet parts desk asking for a 10PA15C unit still needs the complete Daewoo / Doosan DH80-J excavator build, not a bare compressor-family match.
The purchase line should carry 24V, A1, 142 mm and the instruction to confirm the A-section pulley and DH80-J mount; together they describe the assembly being quoted.
A nearby 10PA15C assembly may share a casting, yet the 12V DH80-J entry later in the catalog is electrically distinct. Distributor staff should treat the difference as a new SKU.
If a buyer omits one of the 24V, A1 or 142 mm facts, the enquiry should return to the old-unit photos rather than jump to the nearest stock item.
The receiving team should isolate any 10PA15C unit whose connector, drive or port position conflicts with single-A 142 mm 24V drive.
A new 10PA15C compressor on Daewoo / Doosan DH80-J excavator will not correct a blocked circuit, poor condenser airflow or debris left by the failed unit, so those causes need attention first.
Elecdura can discuss mixed compressor orders while keeping each Daewoo / Doosan DH80-J excavator configuration on its own pricing and packing line.
To price the correct Daewoo / Doosan DH80-J excavator unit, include volume, shipping country, packaging plan and the photo set used to confirm the A-section pulley and DH80-J mount.
Use this buyer checklist when the old 10PA15C unit and nearby variants look deceptively similar.
The 12V DH80-J entry later in the catalog is electrically distinct. Do not approve a substitution from 10PA15C alone. Compare the A1 142 mm clutch, 24V connector, head and ears as a single Daewoo / Doosan DH80-J excavator assembly.
Find the reason the old Daewoo / Doosan DH80-J excavator compressor failed before fitting the replacement. For the Daewoo / Doosan DH80-J excavator workshop, inspect belt tracking, condenser airflow, hoses and circuit cleanliness, then use its machine data for evacuation, refrigerant and oil balance. Those checks protect the single-A 142 mm 24V drive assembly from an unresolved system fault.
Retain A1 and 142 mm together on the Daewoo / Doosan DH80-J excavator line because belt section, groove count and clutch diameter affect alignment. On the Daewoo / Doosan DH80-J excavator installation, a near-size pulley may move the belt path even when the 10PA15C casting looks familiar. The old clutch face needs to support single-A 142 mm 24V drive.
The physical confirmation is to confirm the A-section pulley and DH80-J mount. Write Daewoo / Doosan DH80-J excavator, 10PA15C, 24V, A1 and 142 mm on the same ordering line. For the Daewoo / Doosan DH80-J excavator order, that combination describes single-A 142 mm 24V drive without asking a family name to carry the whole decision.
Provide a straight clutch view, a head-and-port view, both mounting sides and a readable old-unit label from the Daewoo / Doosan DH80-J excavator installation. Add one wider image before removal so orientation remains visible. Those angles let the supplier confirm the A-section pulley and DH80-J mount and recognize single-A 142 mm 24V drive.
Provide the Daewoo / Doosan DH80-J excavator application, 10PA15C identity, quantity and destination with old-unit label and multi-angle photos. State single-A 142 mm 24V drive and ask the supplier to confirm the A-section pulley and DH80-J mount. Retain packaging or buyer-brand requirements on a separate Daewoo / Doosan DH80-J excavator RFQ line so pricing stays attached to the right compressor.
Treat Daewoo / Doosan DH80-J excavator as the intended application, then check the machine plate and removed-unit photographs. Equipment revisions can alter brackets, connectors or ports, which is why the buyer still needs to confirm the A-section pulley and DH80-J mount. The single-A 142 mm 24V drive description stays with the quoted unit.
Photograph the clutch face, head, hose connections and every mounting side on the Daewoo / Doosan DH80-J excavator machine. One wider image of the Daewoo / Doosan DH80-J excavator installation needs to preserve hose and head orientation. The buyer must be able to confirm the A-section pulley and DH80-J mount for this single-A 142 mm 24V drive request.
Send the required quantity, destination and packaging plan with the old-unit label and clear installation photographs. Include single-A 142 mm 24V drive and ask Elecdura to confirm the A-section pulley and DH80-J mount before the Daewoo / Doosan DH80-J excavator compressor is priced.
