Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
SD7H15
8275; 8295; 1531196; 1888032
Doosan
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
Neutral packaging or customized private-label packaging
18 months
8275; 8295; 1531196; 1888032
Doosan excavators using the matching 24V SD7H15 PV10 compressor configuration
Catalog-controlled Doosan excavator application; confirm 8275 label, 24V clutch, PV10 120 mm pulley, head, ports, connector and mounts against the removed unit
| Quantity: | |
|---|---|
This catalog position identifies Sanden 8275 for a Doosan excavator application, with a 24V clutch and ten-rib 120 mm pulley. Public detail pages strongly support the 8275/8295 SD7H15 hardware but often associate that reference family with Scania trucks. Elecdura therefore keeps the Doosan application as the supplier-catalog truth and records the public application conflict internally.
For a buyer, that conflict means the original excavator compressor must be available for comparison. The product is not widened to every machine or truck using an 8275 reference. The dedicated image, label, clutch, ports and mounts must agree before the assembly becomes approved stock.
| Application | Catalog-controlled Doosan excavator replacement application |
|---|---|
| Compressor model | Sanden SD7H15 |
| OE / cross references | 8275; 8295; 1531196; 1888032 |
| Clutch voltage | 24V |
| Pulley | PV10, 120 mm |
| Refrigerant | R134a |
| Mounting | Direct mount |
| Supply form | Complete aftermarket A/C compressor assembly |
The 24V, PV10 and 120 mm configuration is corroborated by opened public product pages. The Doosan application comes from the supplier catalog and is not replaced by a public Scania association. If a buyer presents a machine that does not match the photographed head and interfaces, the enquiry remains unresolved.
General SD7H15 lubricant references may support technical review, but the oil balance and refrigerant service procedure belong to the actual Doosan A/C system. The product specification is not an instruction to copy a charge quantity from another application.
Count ten pulley ribs, confirm the 120 mm clutch and 24V connection, then compare the direct-mount faces, head and hose interfaces with the removed excavator unit. Photograph the complete compressor around each connection so orientation is clear.
Machine model, serial number and original label should travel with the first RFQ. Where the public application conflict cannot be resolved by the label, the buyer must approve the physical sample before volume production or fleet stocking.
A PV10 120 mm clutch distinguishes this line from the PV8 119 mm and twin-A 132 mm Scania products in the same supplier catalog. It also separates the assembly from many common excavator compressors with single-groove clutches. Those visible differences belong on warehouse labels.
Use Sanden 8275, SD7H15, 24V, PV10 and 120 mm as the control string. Keep “Doosan excavator application—verify original unit” on the commercial record so staff do not interpret the public truck references as an automatic fitment expansion.
At receiving, inspect the ten-rib clutch, electrical connector, head, ports, mounts and protective caps against the approved image. Any difference should be quarantined because the application evidence is already known to require a physical check.
Before fitting, the workshop must diagnose the previous failure, check drive alignment, airflow, hose condition and contamination, and follow the machine service procedure for cleaning, oil balance, evacuation and R134a charging.
Elecdura can review this 8275 configuration for construction-equipment distributors and fleets that can provide original-unit evidence. Sample approval is the appropriate first step before neutral, buyer-label or private-label packing is discussed.
The RFQ should state machine model or serial, quantity, destination and delivery requirement and include individual interface photographs. Any mixed order should keep the 8275 line separate from truck-associated 8275 stock until the intended Doosan configuration is approved.
These questions explain how to buy the catalog-controlled Doosan version without ignoring the public application conflict.
The supplier catalog controls this product position as Doosan excavator. Public sources mainly confirm the hardware and sometimes list Scania, so the conflict is kept internal and fitment requires original-unit evidence.
The controlled assembly is SD7H15, 24V, PV10, 120 mm and R134a. References 8295, 1531196 and 1888032 can support lookup but do not replace the physical comparison.
No. A matching reference family does not prove the same head, ports or mount for the excavator. The removed Doosan unit and approved sample decide the order.
Send the original label, pulley face, 24V connector, head, hose interfaces and mounting sides as separate clear images, together with machine identification.
Check all ten ribs, clutch diameter, connector, ports, mounts and shipping caps against the approved record before releasing the compressor to inventory.
It can be considered after exact sample approval and for suitable quantities. The private label must retain a traceable item code and controlled physical configuration.
Use the Doosan machine procedure to diagnose the old failure and prepare the circuit. Belt, contamination, oil, evacuation and refrigerant decisions belong to the workshop.
Keep Doosan as the catalog application, note that public references also appear under Scania, and require original-unit confirmation. Do not publish an unsupported multi-application claim.
Send the Doosan machine identification, Sanden 8275 details, quantity, destination and packaging request with clear photos of the removed compressor. Elecdura will review the exact SD7H15 24V PV10 120 mm R134a assembly and resolve any physical conflict before wholesale or fleet supply.
