10PA17C 24V A2 132 mm Heavy-Duty A/C Compressor for LiuGong 856H wheel loader

Importer Guide to This 10PA17C A/C Compressor

A stopped LiuGong 856H wheel loader machine is expensive, so the compressor must arrive ready for the exact belt, hose and mounting layout. This complete aftermarket 10PA17C A/C compressor is supplied for wheel-loader uptime during quarry and material-handling service. The page keeps twin-A 132 mm 24V 10PA17C configuration together with the 24V, A2 and 132 mm drive on the quotation line, giving the distributor parts desk one coherent product identity.

For LiuGong 856H wheel loader, a recognizable housing does not settle the order. Elecdura therefore quotes the 24V, A2 and 132 mm assembly with an image-based check of the head, connector and feet, which is especially useful for repeat stock.

Importer Specification Sheet for This 10PA17C A/C Compressor

The specification block is deliberately limited to facts attached to this complete compressor; it supports repeat stock without guessing at system values the product source does not state; the workshop should obtain those missing service quantities from the approved information for LiuGong 856H wheel loader.

Fleet Fitment Evidence for the LiuGong 856H wheel loader A/C Compressor

A useful LiuGong 856H wheel loader photo set includes the clutch face, connector, port block and both mounting sides of the old unit; add one installed view for belt alignment and hose direction; together, those angles give the supplier more fitment evidence than the label alone.

Check both A grooves, 132 mm diameter, 24V connector and loader mounting. This product-specific detail, together with 24V, A2 and 132 mm, is what separates a useful fitment review from a generic 10PA17C lookup.

Distributor Stock Separation for This 10PA17C A/C Compressor

A single-groove excavator compressor or multi-rib truck unit cannot replace this loader build. This difference belongs in the distributor's master data and pick note so later LiuGong 856H wheel loader orders reproduce the approved build.

For a mixed-model shipment, state the quantity of this 10PA17C configuration independently. That gives the packer a specific image and description and reduces the chance of workshop delays.

Wholesale A/C Compressor Handling for LiuGong 856H wheel loader

Before this compressor is binned, compare its clutch and connection side with the approved LiuGong 856H wheel loader view; record any carton damage, bent connector, pulley contact or disturbed port cap and isolate the unit if the finding affects saleable condition.

Before installation on LiuGong 856H wheel loader, the workshop should identify why the previous compressor failed. Belt tracking, hose condition, condenser airflow and contamination may require attention before the new 10PA17C unit is commissioned under the correct service procedure.

Wholesale Ordering Support for the LiuGong 856H wheel loader A/C Compressor

For regional importers, the LiuGong 856H wheel loader application can be combined with other confirmed heavy-duty compressor lines in one shipment. Each physical build retains its own image, quantity and quotation line through packing.

If purchasing is comparing suppliers, give each one the same LiuGong 856H wheel loader application, 24V, A2 and 132 mm and photo evidence; consistent input produces quotations that are easier to compare on scope, packing and delivery.

Fleet Buyer FAQ for the LiuGong 856H wheel loader A/C Compressor

The following points are intended for wholesale buyers comparing the old unit, the offered compressor and the commercial supply plan.

What should a wholesale RFQ include for this 10PA17C compressor?

Provide LiuGong 856H wheel loader, 24V, A2 and 132 mm, quantity, destination and packing requirements; include old-unit views that show the clutch, head, connector and mounts.

What identifies this LiuGong 856H wheel loader A/C compressor?

Use LiuGong 856H wheel loader, 10PA17C and 24V, A2 and 132 mm together; add the approved image and the mounting or port detail used to accept this physical build.

Is the 10PA17C family number enough to confirm fitment?

A matching 10PA17C casting can still carry the wrong clutch or hose direction. Fitment is confirmed only when those physical details also match LiuGong 856H wheel loader.

Can this LiuGong 856H wheel loader compressor use private-label packing?

Neutral cartons and buyer-brand labels can be discussed for qualified LiuGong 856H wheel loader bulk programs. The physical product is approved before artwork or marking details.

What receiving checks apply to this A2 10PA17C compressor?

Confirm LiuGong 856H wheel loader, 24V, A2 and 132 mm, the connector, head and mounting ears while the ports remain capped. Hold any damaged or conflicting unit outside available stock.

What wrong-stock risk applies to this A2 10PA17C compressor?

A single-groove excavator compressor or multi-rib truck unit cannot replace this loader build; the distinction should remain visible from RFQ through receiving, even when both compressors share familiar castings.

Which photos help confirm this LiuGong 856H wheel loader compressor?

Use uncropped angle shots rather than a collage: clutch, ports, connector, front mount, rear mount and installed position; keep them with the quotation line for repeat purchasing.

How should a buyer confirm the 24V clutch?

Compare the LiuGong 856H wheel loader electrical circuit with the connector or label evidence on the removed unit. Keep 24V tied to the rest of the approved compressor configuration.

Send an RFQ for This LiuGong 856H wheel loader A/C Compressor

For a wholesale quote, provide the LiuGong 856H wheel loader application, 10PA17C, 24V, A2 and 132 mm, quantity and shipping country. Add the reference photos so Elecdura can review the visible fitment points before discussing delivery and packing; that shared reference makes later questions about the clutch, mounting layout or private-label carton easier to resolve before production.