10S15C 24V PV8 140 mm Heavy-Duty A/C Compressor for LiuGong 950E excavator

Importer Sourcing Brief for the LiuGong 950E excavator A/C Compressor

The product is a complete aftermarket A/C compressor for professional LiuGong 950E excavator repair programmes, not a loose clutch or repair component.

The LiuGong 950E excavator application, 24V electrical package and PV8 140 mm clutch belong on one quotation line.

LiuGong 950E excavator A/C Compressor Mounting Review for Parts Buyers

A parts counter can resolve this request faster when the machine plate and removed compressor are photographed during the same workshop visit.

The fitment decision should end with a visible ability to compare the forward position, eight-rib clutch and mount, supported by the PV8 140 mm drive package.

Importer Check of the forward PV8 140 mm 24V package A/C Compressor

The 24V coil is the electrical boundary for this LiuGong 950E excavator item; the removed-unit connector should support that reading before stock is released. The table describes the sale item; evacuation, charge and oil-balance procedures remain subject to the applicable LiuGong 950E excavator workshop data.

Importer Comparison of Nearby LiuGong 950E excavator A/C Compressor Builds

A nearby 10S15C assembly may share a casting, yet a rear-position SANY truck 8PK/140 unit is not an excavator substitute. Distributor staff should treat the difference as a new SKU.

The receiving record should repeat forward PV8 140 mm 24V package, because a shortened 10S15C description can hide the difference that matters on the machine.

Fleet Workshop Preparation for This 10S15C A/C Compressor

Before binning this LiuGong 950E excavator compressor, compare the carton line with the product image and inspect the clutch face, head and mounting ears for damage.

Belt alignment, hose condition and system cleanliness should be resolved before this 24V LiuGong 950E excavator compressor is asked to return the machine to service.

LiuGong 950E excavator Fleet and Distributor RFQ for This 10S15C A/C Compressor

Wholesale cooperation can cover sample evaluation, consolidated shipments and private-label packing once the forward PV8 140 mm 24V package identity is fixed.

Bulk buyers should list forward PV8 140 mm 24V package beside the required quantity and keep private-label artwork separate from the technical confirmation.

10S15C A/C Compressor FAQ for LiuGong 950E excavator Wholesale Buyers

The following questions address the purchase decisions most likely to affect this forward PV8 140 mm 24V package order.

For a repeat LiuGong 950E excavator RFQ, which old-unit photos help confirm this LiuGong 950E excavator replacement?

Add one wider image before removal so orientation remains visible. Provide a straight clutch view, a head-and-port view, both mounting sides and a readable old-unit label from the LiuGong 950E excavator installation. Those angles let the supplier compare the forward position, eight-rib clutch and mount and recognize forward PV8 140 mm 24V package.

During incoming inspection for LiuGong 950E excavator, which belt-drive facts should the buyer measure on the old unit?

On the LiuGong 950E excavator installation, a near-size pulley may move the belt path even when the 10S15C casting looks familiar. Leave PV8 and 140 mm together on the LiuGong 950E excavator line because belt section, groove count and clutch diameter affect alignment. The old clutch face should support forward PV8 140 mm 24V package.

During distributor review for LiuGong 950E excavator, is a nearby 10S15C build an acceptable substitute?

A rear-position SANY truck 8PK/140 unit is not an excavator substitute. Do not approve a substitution from 10S15C alone. Match the PV8 140 mm clutch, 24V connector, head and ears as a single LiuGong 950E excavator assembly.

While the old LiuGong 950E excavator compressor is available, what should the workshop photograph around the 10S15C installation?

One wider image of the LiuGong 950E excavator installation should preserve hose and head orientation. Photograph the clutch face, head, hose connections and every mounting side on the LiuGong 950E excavator machine. The buyer must be able to compare the forward position, eight-rib clutch and mount for this forward PV8 140 mm 24V package request.

When equipment in the LiuGong 950E excavator line is down for A/C repair, when should buyer-brand packaging be discussed for 10S15C?

Elecdura can discuss neutral cartons, buyer-brand labels and packaging artwork for qualified bulk LiuGong 950E excavator programmes. First fix 10S15C, 24V, PV8, 140 mm and forward PV8 140 mm 24V package. A clear identity prevents custom packing from concealing a mixed variant.

While planning LiuGong 950E excavator importer stock, what keeps this 10S15C unit out of similar stock bins?

Name the stock line with LiuGong 950E excavator, 10S15C, 24V, PV8 and 140 mm. Save the exact reference image beside the receiving record and retain the phrase forward PV8 140 mm 24V package. A rear-position SANY truck 8PK/140 unit is not an excavator substitute.

While planning LiuGong 950E excavator importer stock, which inputs let Elecdura price the correct 10S15C unit?

State forward PV8 140 mm 24V package and ask the supplier to compare the forward position, eight-rib clutch and mount. Send the LiuGong 950E excavator application, 10S15C identity, quantity and destination with old-unit label and multi-angle photos. Leave packaging or buyer-brand requirements on a separate LiuGong 950E excavator RFQ line so pricing stays attached to the right compressor.

Before packing LiuGong 950E excavator private-label orders, which facts identify the LiuGong 950E excavator 10S15C A/C compressor?

Write LiuGong 950E excavator, 10S15C, 24V, PV8 and 140 mm on the same purchase line. The physical confirmation is to compare the forward position, eight-rib clutch and mount. For the LiuGong 950E excavator order, that combination describes forward PV8 140 mm 24V package without asking a family name to carry the whole decision.

Request a Wholesale 10S15C A/C Compressor Quote for LiuGong 950E excavator

Send the required quantity, destination and packaging plan with the old-unit label and clear installation photographs. Include forward PV8 140 mm 24V package and ask Elecdura to compare the forward position, eight-rib clutch and mount before the LiuGong 950E excavator compressor is priced.