113928 Honda Starter Motor 12V 1.7kW 11T

113928 Honda Starter Motor Wholesale Supply for Distributors

For distributors and fleet-parts buyers, 113928 identifies a 12V, 1.7kW, 11-tooth counterclockwise configuration for Honda vehicles and equipment cross-referenced to 113928. Approve the complete reference, rating, drive end, mounting face, pinion and terminals against the removed unit or signed sample so a nearby version is not substituted into the purchasing line.

For repeat sourcing of 113928, use 113928 / 228000-1180 / 31200-P5T-G00 / CST40183AS / 220203 as search evidence and Honda vehicles and equipment cross-referenced to 113928 as the application checkpoint. Neither item replaces measurement of the removed starter. Archive the approved sample photos, key dimensions, carton label and inspection date under one buyer part number so purchasing, warehouse and warranty teams work from the same physical definition.

113928 Starter Motor B2B Production and Test Video for Aftermarket Buyers

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 113928.

113928 Starter Motor Distributor Specifications for Fleet Replacement

113928 Starter Motor OE Cross-Reference Review for Wholesale Supply

Use 113928 as the primary purchasing reference and cross-check 228000-1180, 31200-P5T-G00, CST40183AS, 220203. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

113928 Starter Motor Bulk Fitment Approval for Distributor Sourcing

Fitment control for 113928 starts with the old starter and the application record. Compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement, and do not force a unit into position with the mounting bolts. If the reference family includes multiple ratings or tooth counts, create separate approval and inventory records for each physical version.

113928 Starter Motor Wholesale Receiving Inspection for Bulk Procurement

Inspect incoming 113928 lots against the signed sample and purchase-line specification. Check reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, record the result by lot and quarantine any mixed version before it reaches saleable inventory. This prevents a low-cost receiving shortcut from becoming an unverified substitute that can stop equipment, generate a claim and turn a low unit price into a costly order.

113928 Starter Motor MOQ and Private-Label Supply for B2B Supply

113928 Starter Motor Distributor FAQ for Aftermarket Buyers

How should 113928 cross-references be controlled in a B2B order?

Use 113928 as the control reference and compare the complete group 113928 / 228000-1180 / 31200-P5T-G00 / CST40183AS / 220203. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

What engine or equipment data is required for 113928?

Confirm the complete 113928 / 228000-1180 / 31200-P5T-G00 / CST40183AS / 220203 group together with the 12V, 1.7kW, 11-tooth counterclockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Why must 12V, 1.7kW and 11T be checked together on 113928?

Confirm the complete 113928 / 228000-1180 / 31200-P5T-G00 / CST40183AS / 220203 group together with the 12V, 1.7kW, 11-tooth counterclockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What must be approved before volume supply for 113928?

Confirm the complete 113928 / 228000-1180 / 31200-P5T-G00 / CST40183AS / 220203 group together with the 12V, 1.7kW, 11-tooth counterclockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

How can a buyer prevent a bolt-up mismatch on 113928?

Compare the equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

How should a wholesale shipment of 113928 starters be inspected?

Tie every carton and sampled unit to 113928, the approved cross-reference set and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then measure and compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

When is a cross-referenced substitute acceptable for 113928?

A substitute is acceptable only when its complete OE relationship, 12V system, 1.7kW rating, 11T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit details, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Which system checks should precede a 113928 warranty claim?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What information is needed for a 113928 wholesale quotation?

Send 113928 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Request a B2B Quote for 113928 Starter Motors

Send the complete reference, Honda vehicles and equipment cross-referenced to 113928, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.