7H13 24V A1 Heavy-Duty A/C Compressor for Kobelco excavator top-port application

Wholesale 7H13 A/C Compressor for Kobelco excavator top-port application

Jobsite repairs leave little room for a second freight cycle, which makes the physical identity of this Kobelco excavator top-port application compressor important at quotation stage. The offered 7H13 compressor is a complete assembly for Kobelco excavator top-port application maintenance where jobsite downtime and wrong-fit freight must be controlled, with A1 125 mm 24V 7H13 configuration. Keeping 24V, A1 and 125 mm with the head and mounting layout helps the service-parts buyer separate it from nearby variants.

For Kobelco excavator top-port application, a recognizable housing does not settle the order. Elecdura therefore quotes the 24V, A1 and 125 mm assembly with an image-based check of the head, connector and feet, which is especially useful for repeat stock.

Distributor Specification Check for the 7H13 A/C Compressor

The listed fields give the service-parts buyer the product-level facts needed for a quote. They do not replace the machine service specification for Kobelco excavator top-port application with 24V, A1 and 125 mm. In particular, any oil balance, refrigerant charge or commissioning value omitted from the product data must be confirmed for Kobelco excavator top-port application.

Fleet Fitment Evidence for the Kobelco excavator top-port application A/C Compressor

For this 7H13 order, one front photograph is insufficient. The supplier needs separate angles showing the A1 clutch, hose head, electrical connection and feet, plus an installed Kobelco excavator top-port application view where space allows.

Before approving quantity, confirm the top or vertical port layout, clutch face and mounting footprint. The result should be written into the purchase record, reducing the chance of workshop delays on a repeat order.

Fleet Parts Boundaries for This 7H13 A/C Compressor

Keep adjacent 7H13 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Kobelco excavator top-port application. Keep that distinction in the purchase record instead of depending on memory. A nearby 7H13 assembly for Kobelco excavator top-port application can share the housing outline while changing the belt, voltage or hose position, with 24V, A1 and 125 mm retained on the stock record.

Alternative references can be useful for search, but they should lead back to the confirmed Kobelco excavator top-port application build; receiving should use the 24V, A1 and 125 mm reference. The service-parts buyer still needs the clutch, head and mounting evidence before merging any stock lines.

Wholesale A/C Compressor Handling for Kobelco excavator top-port application

Incoming inspection for this 7H13 line can be short and specific: verify the Kobelco excavator top-port application, 24V, A1 and 125 mm and the visible mounting layout. Those observations protect the Kobelco excavator top-port application distributor's stock record and any later fleet claim; the 24V, A1 and 125 mm specification remains the purchase reference.

Before installation on Kobelco excavator top-port application, the workshop should identify why the previous compressor failed. Belt tracking, hose condition, condenser airflow and contamination may require attention before the new 7H13 unit is commissioned under the correct service procedure.

Distributor RFQ Details for This 7H13 A/C Compressor

For regional importers, the Kobelco excavator top-port application can be combined with other confirmed heavy-duty compressor lines in one shipment. Each physical build retains its own image, quantity and purchase record through packing.

A complete enquiry states quantity, destination, target delivery window and packaging plan in the Kobelco excavator top-port application 24V, A1 and 125 mm order. Add Kobelco excavator top-port application, 24V, A1 and 125 mm and the installation images, especially the views needed to confirm the top or vertical port layout, clutch face and mounting footprint.

Wholesale 7H13 A/C Compressor Questions from Buyers

The following points are intended for wholesale buyers comparing the old unit, the offered compressor and the commercial supply plan for Kobelco excavator top-port application with 24V, A1 and 125 mm.

Which photos help confirm this Kobelco excavator top-port application compressor?

Photograph the old 7H13 unit before and after removal. Those images should reveal belt alignment, port direction, connector position and the way it mounts to Kobelco excavator top-port application.

Why does port direction matter on this 7H13 compressor?

Hose routing has limited space around the Kobelco excavator top-port application installation. the confirmed Kobelco excavator top-port application product needs the connection side shown in the reference photographs, not merely a compatible body family; receiving should use the 24V, A1 and 125 mm reference.

What should a wholesale RFQ include for this 7H13 compressor?

Provide Kobelco excavator top-port application, 24V, A1 and 125 mm, quantity, destination and packing requirements. Include old-unit views that show the clutch, head, connector and mounts for Kobelco excavator top-port application.

How should a buyer confirm the 24V clutch?

Do not infer clutch voltage from housing shape. The installation images and Kobelco excavator top-port application circuit information should both support the 24V unit on the RFQ.

What wrong-stock risk applies to this A1 7H13 compressor?

Keep adjacent 7H13 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Kobelco excavator top-port application. Recording that boundary helps the service-parts buyer avoid workshop delays during repeat supply.

Which details belong on the Kobelco excavator top-port application compressor order?

Use Kobelco excavator top-port application, 7H13 and 24V, A1 and 125 mm together. Add the reference image and the mounting or port detail used to accept this physical build for Kobelco excavator top-port application.

Can this Kobelco excavator top-port application compressor use private-label packing?

Neutral cartons and buyer-brand labels can be discussed for qualified Kobelco excavator top-port application bulk programs. The physical product is confirmed before artwork or marking details for Kobelco excavator top-port application with 24V, A1 and 125 mm.

What workshop checks apply before fitting this A1 7H13 compressor?

The technician should correct the original fault, verify belt alignment and prepare the circuit using the confirmed Kobelco excavator top-port application oil and refrigerant process.

Request a Wholesale 7H13 A/C Compressor Quote

For a wholesale quote, provide the Kobelco excavator top-port application, 7H13, 24V, A1 and 125 mm, quantity and shipping country. Add the installation images so Elecdura can review the visible fitment points before discussing delivery and packing. Once the physical match is accepted, the same purchase record can support purchasing, receiving and future distributor replenishment.