7H13 24V B1 Heavy-Duty A/C Compressor for Kobelco SK-8 top-port construction equipment

Fleet Replacement 7H13 A/C Compressor for Kobelco SK-8 top-port construction equipment

Equipment dealers sourcing for Kobelco SK-8 top-port construction equipment cannot rely on the compressor family alone when nearby builds use different heads or feet. Supplied as a complete aftermarket compressor, this 7H13 unit combines B1 146 mm 24V 7H13 configuration. The stock card retains 24V, B1 and 146 mm with the application so purchasing and receiving are working from the same build.

Unlike a family-only listing, this offer retains Kobelco SK-8 top-port construction equipment and the drive as one sellable configuration; the 24V, B1 and 146 mm specification remains the purchase reference. That is useful when a fleet carries several 7H13 compressors and needs each physical build separated on the order.

Importer Specification Sheet for This 7H13 A/C Compressor

The specification block covers this complete compressor rather than the wider A/C circuit for Kobelco SK-8 top-port construction equipment with 24V, B1 and 146 mm. For regional replenishment, the workshop should take any oil balance, refrigerant charge and commissioning values from the approved service information for Kobelco SK-8 top-port construction equipment.

Distributor Fitment Check for the Kobelco SK-8 top-port construction equipment A/C Compressor

A useful Kobelco SK-8 top-port construction equipment photo set includes the clutch face, connector, port block and both mounting sides of the old unit. Add one installed view for belt alignment and hose direction for Kobelco SK-8 top-port construction equipment. For the Kobelco SK-8 top-port construction equipment 24V, B1 and 146 mm review, those angles give the supplier more fitment evidence than the label alone.

Ask the supplier to confirm the top or vertical port layout, clutch face and mounting footprint. Combined with 24V, B1 and 146 mm, that check can expose an incorrect port direction, pulley or foot pattern before the compressor enters a wholesale shipment.

Importer Comparison Notes for the Kobelco SK-8 top-port construction equipment A/C Compressor

Keep adjacent 7H13 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Kobelco SK-8 top-port construction equipment. Keep that distinction in the stock card instead of depending on memory for Kobelco SK-8 top-port construction equipment. A nearby 7H13 assembly for Kobelco SK-8 top-port construction equipment can share the housing outline while changing the belt, voltage or hose position, with 24V, B1 and 146 mm retained on the stock record.

Where cross references overlap, retain the application and visible configuration on the buyer's order for Kobelco SK-8 top-port construction equipment; receiving should use the 24V, B1 and 146 mm reference. Those fields help the Kobelco SK-8 top-port construction equipment distributor decide whether a proposed interchange is a true replacement or merely a similar family; the 24V, B1 and 146 mm specification remains the purchase reference.

Distributor Receiving and Service Notes for This A/C Compressor

At receiving, leave the ports capped while the warehouse checks the carton line against Kobelco SK-8 top-port construction equipment, 7H13 and 24V, B1 and 146 mm. Inspect the clutch, connector, head and mounting ears for transit damage, then retain a few receiving images with the stock card.

A replacement 7H13 compressor cannot correct an unresolved A/C circuit fault. The technician should review belt alignment, airflow, leakage and system cleanliness, then use the oil and refrigerant procedure confirmed for Kobelco SK-8 top-port construction equipment.

Bulk Kobelco SK-8 top-port construction equipment A/C Compressor Supply for Distributors

Elecdura can quote this 7H13 compressor for sample evaluation, distributor restocking and mixed heavy-duty A/C shipments. After the Kobelco SK-8 top-port construction equipment application and physical build are approved, qualified volumes can include neutral cartons, buyer-brand labels or agreed packaging artwork.

The shortest route to an accurate quote is a complete line: Kobelco SK-8 top-port construction equipment, 7H13, 24V, B1 and 146 mm, quantity and destination. Attach clutch, head, connector and mounting views for the supplier's comparison for Kobelco SK-8 top-port construction equipment.

Fleet Buyer FAQ for the Kobelco SK-8 top-port construction equipment A/C Compressor

The following points are intended for wholesale buyers comparing the old unit, the offered compressor and the commercial supply plan for Kobelco SK-8 top-port construction equipment with 24V, B1 and 146 mm.

How should mixed 7H13 variants appear on a bulk order?

Separate quotation lines are the simplest control for a mixed shipment in the Kobelco SK-8 top-port construction equipment 24V, B1 and 146 mm order. Each line should link to the product reference image and stock card.

How should a buyer describe this 7H13 compressor?

The stock card should carry Kobelco SK-8 top-port construction equipment, 7H13, 24V, B1 and 146 mm and a reference image. Together they give purchasing and receiving the same product definition for Kobelco SK-8 top-port construction equipment with 24V, B1 and 146 mm.

What wrong-stock risk applies to this B1 7H13 compressor?

Keep adjacent 7H13 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Kobelco SK-8 top-port construction equipment. Treat that neighboring unit as a different product rather than an automatic 7H13 interchange for Kobelco SK-8 top-port construction equipment.

What should a wholesale RFQ include for this 7H13 compressor?

Send the confirmed stock card, expected order quantity and receiving country. First-time enquiries should also include clear clutch, port and mounting photographs during the Kobelco SK-8 top-port construction equipment 24V, B1 and 146 mm review.

Can this Kobelco SK-8 top-port construction equipment compressor use private-label packing?

Neutral cartons and buyer-brand labels can be discussed for qualified Kobelco SK-8 top-port construction equipment bulk programs. The physical product is confirmed before artwork or marking details for Kobelco SK-8 top-port construction equipment with 24V, B1 and 146 mm.

Which photos help confirm this Kobelco SK-8 top-port construction equipment compressor?

Use uncropped angle shots rather than a collage: clutch, ports, connector, front mount, rear mount and installed position for Kobelco SK-8 top-port construction equipment. Keep them with the stock card for repeat purchasing.

Why must the B1 146 mm clutch stay on the RFQ?

Keeping the clutch on the RFQ lets the supplier compare the actual drive rather than only the 7H13 family. It also gives receiving a measurable feature to check.

What receiving checks apply to this B1 7H13 compressor?

Leave the protective caps in place, verify Kobelco SK-8 top-port construction equipment and inspect the clutch, connector and feet, with 24V, B1 and 146 mm retained on the stock record. A conflict belongs in quarantine rather than on the Kobelco SK-8 top-port construction equipment shelf.

Send an RFQ for This Kobelco SK-8 top-port construction equipment A/C Compressor

Importers and fleet buyers can submit an RFQ for this 7H13 assembly with expected demand, delivery location and packing needs. Include the confirmed Kobelco SK-8 top-port construction equipment reference views to keep the physical build clear. Once the physical match is accepted, the same stock card can support purchasing, receiving and future distributor replenishment.