7H15 24V A2 132 mm Heavy-Duty A/C Compressor for FAW Jiefang small J6 angled-port truck

Fleet Replacement 7H15 A/C Compressor for FAW Jiefang small J6 angled-port truck

For FAW Jiefang small J6 angled-port truck service stock, the application name is useful only when it stays attached to the clutch and electrical details. The complete aftermarket 7H15 assembly is built around A2 132 mm 24V 7H15 configuration. Its 24V, A2 and 132 mm drive and visible mounting layout stay together as one orderable configuration for FAW Jiefang small J6 angled-port truck fleet replacement, regional distributor replenishment and mixed-model heavy-truck A/C stock.

The intended customer is a distributor or fleet buyer who needs the same configuration again, not a one-off generic reference for FAW Jiefang small J6 angled-port truck with 24V, A2 and 132 mm. Linking the FAW Jiefang small J6 angled-port truck application to 24V, A2 and 132 mm gives that buyer a record suitable for purchasing and later replenishment.

Distributor Specification Check for the 7H15 A/C Compressor

For stock control, retain 24V, A2 and 132 mm with the FAW Jiefang small J6 angled-port truck application and the complete-assembly description. Shortening the line to 7H15 alone removes the details most likely to separate two look-alike units for FAW Jiefang small J6 angled-port truck. Vehicle-system values not shown in the table are confirmed from the specific service documentation for FAW Jiefang small J6 angled-port truck with 24V, A2 and 132 mm.

Distributor Fitment Check for the FAW Jiefang small J6 angled-port truck A/C Compressor

The fitment review should follow the path a technician will use: belt side, electrical side, hose connection and mounting points during the FAW Jiefang small J6 angled-port truck 24V, A2 and 132 mm review. Applied to FAW Jiefang small J6 angled-port truck, that photo sequence makes a wrong but similar compressor easier to reject before shipping.

The decisive step is to confirm the angled head and port clocking together with pulley alignment and ear spacing. Keep the A2 drive and 24V clutch consistent with this entry even when another 7H15 unit has a familiar casting.

Wholesale Variant Control for the FAW Jiefang small J6 angled-port truck A/C Compressor

Keep nearby 7H15 versions with another voltage, pulley, port direction or mounting layout on separate stock lines for FAW Jiefang small J6 angled-port truck. For FAW Jiefang small J6 angled-port truck stock, this difference needs its own reference image and order description. The body family alone does not protect the buyer from workshop delays.

Repeat FAW Jiefang small J6 angled-port truck orders should carry the same product image and configuration used for the original approval. That record is more dependable than choosing from a shelf of compressors by housing shape alone for FAW Jiefang small J6 angled-port truck with 24V, A2 and 132 mm.

Wholesale A/C Compressor Handling for FAW Jiefang small J6 angled-port truck

The receiving team does not need to dismantle the compressor for FAW Jiefang small J6 angled-port truck with 24V, A2 and 132 mm. It only needs to confirm the visible configuration for FAW Jiefang small J6 angled-port truck, check the protective caps and clutch area, and hold any unit that could create workshop delays.

Workshop preparation affects the life of this 7H15 assembly as much as the part choice for FAW Jiefang small J6 angled-port truck with 24V, A2 and 132 mm. The FAW Jiefang small J6 angled-port truck system should be checked for contamination, leakage, belt alignment and airflow before charging and commissioning.

Wholesale Ordering Support for the FAW Jiefang small J6 angled-port truck A/C Compressor

Wholesale supply is available for FAW Jiefang small J6 angled-port truck fleet projects, repeat distributor stock and consolidated orders. Elecdura keeps this 7H15 build on its own product line so a packaging request cannot hide a change in clutch, voltage or mounting during the FAW Jiefang small J6 angled-port truck 24V, A2 and 132 mm review.

The shortest route to an accurate quote is a complete line: FAW Jiefang small J6 angled-port truck, 7H15, 24V, A2 and 132 mm, quantity and destination. Attach clutch, head, connector and mounting views for the supplier's comparison for FAW Jiefang small J6 angled-port truck.

Wholesale 7H15 A/C Compressor Questions from Buyers

The questions below address the fitment and purchasing details most likely to affect a FAW Jiefang small J6 angled-port truck wholesale order.

Which details belong on the FAW Jiefang small J6 angled-port truck compressor order?

Describe the unit as the 24V, A2 and 132 mm 7H15 assembly for FAW Jiefang small J6 angled-port truck, then attach the reference photos. That is more specific than a model-family number by itself for FAW Jiefang small J6 angled-port truck with 24V, A2 and 132 mm.

Why must the A2 132 mm clutch stay on the RFQ?

A compressor body may accept several clutch builds, but FAW Jiefang small J6 angled-port truck belt path does not; receiving should use the 24V, A2 and 132 mm reference. The service-parts buyer should retain this pulley description through quotation and packing.

How should mixed 7H15 variants appear on a bulk order?

List application, drive and quantity for every variant, even when housings look alike. Receiving can then reconcile each compressor with its own reference image.

What wrong-stock risk applies to this A2 7H15 compressor?

Keep nearby 7H15 versions with another voltage, pulley, port direction or mounting layout on separate stock lines for FAW Jiefang small J6 angled-port truck. Keep the two builds on separate quotation and warehouse lines for FAW Jiefang small J6 angled-port truck.

Is the 7H15 family number enough to confirm fitment?

No. For FAW Jiefang small J6 angled-port truck, the family number still needs to agree with 24V, A2 and 132 mm, the connector, head and mounting layout. Related housings may belong to different complete assemblies.

What should a wholesale RFQ include for this 7H15 compressor?

A useful RFQ combines the part identity with the commercial program: FAW Jiefang small J6 angled-port truck, 24V, A2 and 132 mm, quantity, destination, schedule and packaging.

Can this FAW Jiefang small J6 angled-port truck compressor use private-label packing?

Neutral cartons and buyer-brand labels can be discussed for qualified FAW Jiefang small J6 angled-port truck bulk programs. The physical product is confirmed before artwork or marking details for FAW Jiefang small J6 angled-port truck with 24V, A2 and 132 mm.

Which photos help confirm this FAW Jiefang small J6 angled-port truck compressor?

Use uncropped angle shots rather than a collage: clutch, ports, connector, front mount, rear mount and installed position for FAW Jiefang small J6 angled-port truck. Keep them with the order line for repeat purchasing.

Send an RFQ for This FAW Jiefang small J6 angled-port truck A/C Compressor

For a wholesale quote, provide the FAW Jiefang small J6 angled-port truck application, 7H15, 24V, A2 and 132 mm, quantity and shipping country. Add the reference photos so Elecdura can review the visible fitment points before discussing delivery and packing for FAW Jiefang small J6 angled-port truck. The reply can then keep the confirmed FAW Jiefang small J6 angled-port truck configuration visible in pricing, sample review and any later repeat-order reference.