V5 24V 6PK 130 mm Heavy-Duty A/C Compressor for FAW Jiefang New Hanwei

FAW Jiefang New Hanwei A/C Compressor for Distributor Stock

A distributor supporting FAW Jiefang New Hanwei fleets needs the complete drive and mounting description before the unit reaches the workshop. The offered V5 compressor is a complete assembly for FAW Jiefang New Hanwei fleet replacement, distributor replenishment and mixed-configuration heavy-truck A/C inventory, with V5 24V, 6PK and 130 mm configuration. Keeping 24V, 6PK and 130 mm with the head and mounting layout helps the A/C parts distributor separate it from nearby variants.

That combination helps importers separate this assembly from other V5 versions before freight and workshop time are committed for FAW Jiefang New Hanwei with 24V, 6PK and 130 mm. Once the FAW Jiefang New Hanwei application agrees with the installation images, Elecdura can discuss distributor replenishment and qualified private-label programs.

Wholesale A/C Compressor Specifications for FAW Jiefang New Hanwei

The table describes one saleable assembly rather than a menu of interchangeable options for FAW Jiefang New Hanwei with 24V, 6PK and 130 mm. On this FAW Jiefang New Hanwei line, 24V belongs with the 6PK clutch and 130 mm diameter. System charge and oil values that are not published here remain subject to the approved service data for the exact installation for FAW Jiefang New Hanwei with 24V, 6PK and 130 mm.

Importer Photo Review for This V5 A/C Compressor

If several V5 versions are present in the same fleet, mark the old compressor before it reaches the bench. Photograph its installed position on FAW Jiefang New Hanwei and keep the resulting angle shots with the specific fitment record.

The approval photographs should make it possible to compare the pulley, clutch voltage, connector, suction and discharge ports and complete mounting geometry during the FAW Jiefang New Hanwei 24V, 6PK and 130 mm review. If the visible evidence does not support that point, keep the FAW Jiefang New Hanwei enquiry open instead of selecting by appearance.

Importer Comparison Notes for the FAW Jiefang New Hanwei A/C Compressor

Keep other V5 versions with a different voltage, pulley, diameter, head, connector, port direction or mounting arrangement on separate stock lines for FAW Jiefang fitment. The comparison matters because two V5 bodies can look related while creating different installation outcomes on V5 24V, 6PK and 130 mm assembly.

Alternative references can be useful for search, but they should lead back to this confirmed FAW Jiefang V5 application build; this order is for the 24V, 6PK and 130 mm version. The A/C parts distributor still needs the clutch, head and mounting evidence before merging any stock lines.

Wholesale A/C Compressor Handling for FAW Jiefang New Hanwei

Receiving should use the same FAW Jiefang replacement line evidence that purchasing approved. That means the product image, the V5 identification and 24V, 6PK and 130 mm, followed by a visual check for impact damage or missing protective caps.

A replacement V5 compressor cannot correct an unresolved A/C circuit fault. The technician should review belt alignment, airflow, leakage and system cleanliness, then use the oil and refrigerant procedure confirmed for FAW Jiefang fitment.

Distributor RFQ Details for This V5 A/C Compressor

Wholesale supply is available for V5 24V, 6PK and 130 mm assembly fleet projects, repeat distributor stock and consolidated orders. Elecdura keeps this V5 build on its own product line so a packaging request cannot hide a change in clutch, voltage or mounting during this FAW Jiefang V5 application 24V, 6PK and 130 mm review.

For container planning, state how many units of this exact V5 configuration are required and whether cartons need buyer marks for FAW Jiefang replacement line with 24V, 6PK and 130 mm. That buyer should keep any neighboring variant on a separate line for FAW Jiefang fitment with 24V, 6PK and 130 mm.

Wholesale V5 A/C Compressor Questions from Buyers

These buyer questions connect the V5 product identity with quotation, receiving and workshop use for V5 24V, 6PK and 130 mm assembly.

What wrong-stock risk applies to this 6PK V5 compressor?

Keep other V5 versions with a different voltage, pulley, diameter, head, connector, port direction or mounting arrangement on separate stock lines for this FAW Jiefang V5 application. The distinction should remain visible from RFQ through receiving, even when both compressors share familiar castings in the FAW Jiefang replacement line 24V, 6PK and 130 mm order.

Is the V5 family number enough to confirm fitment?

The family number is useful for enquiry routing, not final approval in the FAW Jiefang fitment 24V, 6PK and 130 mm order. This V5 24V, 6PK and 130 mm assembly order still depends on 24V, 6PK and 130 mm and the confirmed head and mounting arrangement.

What should a wholesale RFQ include for this V5 compressor?

State the V5 application, required volume, shipping country and delivery target for this FAW Jiefang V5 application with 24V, 6PK and 130 mm. Attach the installation images and note any neutral or buyer-brand packing request for FAW Jiefang replacement line.

Can this FAW Jiefang New Hanwei compressor use private-label packing?

Neutral cartons and buyer-brand labels can be discussed for qualified FAW Jiefang fitment bulk programs. The physical product is confirmed before artwork or marking details for V5 24V, 6PK and 130 mm assembly with 24V, 6PK and 130 mm.

What workshop checks apply before fitting this 6PK V5 compressor?

Fitment approval is only the first step. The workshop also needs the exact application service data and a clear reason for the old compressor's failure for this FAW Jiefang V5 application with 24V, 6PK and 130 mm.

How should mixed V5 variants appear on a bulk order?

Separate quotation lines are the simplest control for a mixed shipment. Each line should link to the product reference image and fitment record.

What identifies this FAW Jiefang New Hanwei A/C compressor?

The fitment record should carry FAW Jiefang replacement line, V5, 24V, 6PK and 130 mm and a reference image. Together they give purchasing and receiving the same product definition for FAW Jiefang fitment with 24V, 6PK and 130 mm.

Which photos help confirm this FAW Jiefang New Hanwei compressor?

Photograph the old V5 unit before and after removal. Those images should reveal belt alignment, port direction, connector position and the way it mounts to V5 24V, 6PK and 130 mm assembly.

Request a Wholesale V5 A/C Compressor Quote

Importers and fleet buyers can submit an RFQ for this V5 assembly with expected demand, delivery location and packing needs in this FAW Jiefang V5 application 24V, 6PK and 130 mm order. Include the confirmed FAW Jiefang replacement line reference views to keep the physical build clear. A clear first enquiry also gives both parties a dependable reference if the FAW Jiefang fitment compressor moves from sample evaluation into regular supply.