DCP99518 10S15C Heavy-Duty A/C Compressor for Fendt

Wholesale 10S15C A/C Compressor for Fendt agricultural equipment

Fendt parts buyers preparing for seasonal tractor service need more than the 10S15C family name. This DCP99518 assembly is ordered as a 12V, single-A 130 mm compressor, so the drive and the Fendt application remain visible from quotation through workshop issue.

The product image gives receiving a physical reference for the clutch, rear head and ears. Retaining that reference with the buyer SKU supports planned Fendt replenishment without confusing this item with the larger-pulley versions found in broader market data.

Distributor Specifications for the 10S15C A/C Compressor

The reference field and physical configuration must travel together. Purchasing can search DCP99518, but approval still depends on 12V, A1 and 130 mm, the application and the visible layout. Refrigerant and lubricant entries are shown only where exact product evidence supports them; installation quantities come from the approved service procedure, when the DCP99518 line is reviewed.

Fleet Fitment Evidence for This 10S15C A/C Compressor

Begin with a straight clutch view that shows the single-A profile and a consistent 130 mm measurement, then photograph the 12V lead, rear head and all mounting ears. An installed view is useful for belt alignment and hose direction.

DCP99518 routes the enquiry, but the Fendt fitment decision still comes from agreement among those visible points. Keep the removed compressor available until the sample review is closed.

Distributor Variant Control for Fendt A/C Compressor Stock

Do not merge this item with 10S17C Fendt compressors or with a 132 mm market listing; the supplier catalog controls this SKU at A1 130 mm.

Use a dedicated Fendt item code that repeats 10S15C, 12V and A1 130 mm. The same description should appear on the quote, carton label and receiving note so a nearby pulley version cannot enter the bin through shorthand.

Wholesale Receiving and Service Notes for This A/C Compressor

At receipt, compare the Fendt item label and product image before removing port caps. Check the A1 clutch, connector and exposed ears for impact or distortion, and hold discrepancies outside available stock.

Before installation, the workshop should diagnose the earlier failure and prepare the circuit using the approved Fendt oil, refrigerant and charging procedure. Belt tracking and contamination are system checks, not reasons to change the catalog compressor.

Bulk Fendt A/C Compressor Supply for Distributors

Elecdura can review DCP99518 for Fendt distributor replenishment, mixed agricultural orders and suitable buyer-label programs. Packaging is discussed after the 12V A1 130 mm assembly has been physically approved.

A useful RFQ includes quantity, destination, timing and carton requirements together with the removed-unit images. List any other Fendt compressor configuration on a separate line.

Wholesale 10S15C A/C Compressor Questions from Fendt Buyers

These questions connect the product evidence with the decisions an importer, distributor or fleet buyer makes before this 10S15C assembly becomes approved stock, when the DCP99518 line is reviewed.

Which identity details belong on a wholesale DCP99518 A/C Compressor enquiry?

Use Fendt agricultural equipment, 10S15C, 12V, A1 and 130 mm and the approved product image on the same RFQ line. Add clear views of the head, connector and mounts; a family number by itself does not define this complete assembly, when the DCP99518 line is reviewed.

How should a distributor verify the A1 A/C Compressor clutch?

compare the clutch face, electrical lead, rear head, hose connections and every mounting ear with the removed Fendt compressor. Record the observation before sample approval so the warehouse description and later repeat order preserve the same belt-drive package, when the DCP99518 line is reviewed.

What fitment risk separates this DCP99518 A/C Compressor from nearby variants?

Do not merge this item with 10S17C Fendt compressors or with a 132 mm market listing; the supplier catalog controls this SKU at A1 130 mm. The neighboring product should keep its own item code, image and quotation line until it has been independently approved, when the DCP99518 line is reviewed.

Which photographs help an importer check this Fendt agricultural equipment A/C Compressor?

Send separate views of the pulley face, connector, hose head, front and rear mounts, plus an installed overview when available, when the DCP99518 line is reviewed. Individual angles are easier to compare than a collage and make the approval record useful for repeat purchasing, when the DCP99518 line is reviewed.

What should receiving inspect on this Heavy-Duty A/C Compressor?

Keep the ports capped while receiving checks the carton description, 12V, A1 and 130 mm, visible connection points and mounting faces against the approved image. A damaged or conflicting unit stays outside saleable inventory until reviewed.

Can this 10S15C A/C Compressor use private-label packaging?

Neutral cartons or buyer-brand labels can be quoted for suitable wholesale programs after the physical configuration is accepted, when the DCP99518 line is reviewed. Packaging changes presentation only; it must not blur the approved 12V, A1 and 130 mm product identity.

What workshop preparation applies before fitting this A/C Compressor?

The service team should find the cause of the old compressor failure and prepare the A/C circuit under the approved procedure for Fendt agricultural equipment. Belt alignment, contamination, airflow, hoses, oil balance and charging data remain application-level checks, when the DCP99518 line is reviewed.

How should mixed Fendt A/C Compressor variants appear on a bulk order?

Give each physical build a separate line, quantity, image and buyer SKU, when the DCP99518 line is reviewed. For Fendt agricultural equipment, keeping 12V, A1 and 130 mm visible through quotation, packing and receiving prevents a similar housing from being treated as the same compressor.

Request a Wholesale Fendt 10S15C A/C Compressor Quote

Send Fendt agricultural equipment, 10S15C, 12V, A1 and 130 mm, requested quantity, destination and packing requirements in one enquiry. Attach the old-unit label and individual clutch, head, connector and mounting views, when the DCP99518 line is reviewed. Elecdura can then review the complete assembly against the visible fitment evidence and prepare a wholesale response without treating an unconfirmed 10S15C alternative as the quoted product, when the DCP99518 line is reviewed.