Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
//
//
10S17C
DCP99519
Fendt
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
DCP99519
Fendt 924 and Deutz equipment
Fendt 924 and Deutz equipment; confirm 10S17C, 12V, PV8 120 mm, connector, ports and mounting against the removed unit
| Quantity: | |
|---|---|
For Fendt 924 and Deutz equipment, DCP99519 is useful only when it remains attached to the PV8 120 mm 12V build. This page treats that combination as one complete compressor line for fleet replacement and agricultural distributor stock.
The eight-rib clutch and physical layout should be visible in the enquiry photographs. That evidence allows the buyer to distinguish this unit from the AGCO DCP99519 compressor before freight, harvesting schedules or workshop labour are committed.
| Application | Fendt 924 and Deutz equipment |
|---|---|
| Compressor model | 10S17C |
| OE / cross reference | DCP99519 |
| Clutch voltage | 12V |
| Pulley / clutch | PV8 120 mm |
| Refrigerant | R134a |
| Lubricant reference | ND-8 |
| Supply form | Complete aftermarket A/C compressor assembly |
The reference field and physical configuration must travel together. Purchasing can search DCP99519, but approval still depends on 12V, PV8 and 120 mm, the application and the visible layout. Refrigerant and lubricant entries are shown only where exact product evidence supports them; installation quantities come from the approved service procedure, when the DCP99519 line is reviewed.
Count the eight ribs and measure the 120 mm pulley before checking the 12V plug, head and mounting points. Capture one view that shows how the compressor sits on Fendt 924 or Deutz equipment.
The shared DCP99519 reference makes this physical check essential. A buyer should not approve the PV8 item using evidence collected for the AGCO PV6 assembly.
Do not combine this PV8 120 mm Fendt and Deutz item with the AGCO PV6 151 mm catalog configuration, despite the shared DCP99519 reference.
The Fendt/Deutz PV8 item and AGCO PV6 item require separate order lines even when a distributor buys both under DCP99519. This preserves the clutch package at picking and receiving.
Fendt/Deutz receiving should verify the PV8 clutch, 12V connection and DCP99519 image before accepting the carton. The AGCO PV6 build must not be used to close a shortage.
Installation planning includes the surrounding A/C system: diagnose the old failure, address debris or restriction, and use the approved oil and R134a process for the actual machine.
This DCP99519 PV8 compressor can support Fendt/Deutz fleet stock, agricultural wholesale orders and qualified packaging programs. The approved 12V PV8 120 mm identity remains fixed.
A first RFQ should include machine use, volume, destination and clutch-to-mount photographs. The AGCO PV6 151 mm requirement is quoted independently.
These questions connect the product evidence with the decisions an importer, distributor or fleet buyer makes before this 10S17C assembly becomes approved stock.
Keep the ports capped while receiving checks the carton description, 12V, PV8 and 120 mm, visible connection points and mounting faces against the approved image. A damaged or conflicting unit stays outside saleable inventory until reviewed.
Neutral cartons or buyer-brand labels can be quoted for suitable wholesale programs after the physical configuration is accepted, when the DCP99519 line is reviewed. Packaging changes presentation only; it must not blur the approved 12V, PV8 and 120 mm product identity.
The service team should find the cause of the old compressor failure and prepare the A/C circuit under the approved procedure for Fendt 924 and Deutz equipment. Belt alignment, contamination, airflow, hoses, oil balance and charging data remain application-level checks, when the DCP99519 line is reviewed.
Give each physical build a separate line, quantity, image and buyer SKU, when the DCP99519 line is reviewed. For Fendt 924 and Deutz equipment, keeping 12V, PV8 and 120 mm visible through quotation, packing and receiving prevents a similar housing from being treated as the same compressor.
Use Fendt 924 and Deutz equipment, 10S17C, 12V, PV8 and 120 mm and the approved product image on the same RFQ line. Add clear views of the head, connector and mounts; a family number by itself does not define this complete assembly, when the DCP99519 line is reviewed.
count eight ribs, measure the pulley consistently, and compare connector, ports and mounting points with the removed compressor. Record the observation before sample approval so the warehouse description and later repeat order preserve the same belt-drive package, when the DCP99519 line is reviewed.
Do not combine this PV8 120 mm Fendt and Deutz item with the AGCO PV6 151 mm catalog configuration, despite the shared DCP99519 reference. The neighboring product should keep its own item code, image and quotation line until it has been independently approved, when the DCP99519 line is reviewed.
Send separate views of the pulley face, connector, hose head, front and rear mounts, plus an installed overview when available, when the DCP99519 line is reviewed. Individual angles are easier to compare than a collage and make the approval record useful for repeat purchasing, when the DCP99519 line is reviewed.
Send Fendt 924 and Deutz equipment, 10S17C, 12V, PV8 and 120 mm, requested quantity, destination and packing requirements in one enquiry. Attach the old-unit label and individual clutch, head, connector and mounting views, when the DCP99519 line is reviewed. Elecdura can then review the complete assembly against the visible fitment evidence and prepare a wholesale response without treating an unconfirmed 10S17C alternative as the quoted product.
