0001218172 Deutz Starter Motor 12V 2.2kW 11T

0001218172 Deutz Starter Motor Wholesale Supply for Distributors

For distributors and fleet-parts buyers, 0001218172 identifies a 12V, 2.2kW, 11-tooth clockwise configuration for Deutz vehicles and equipment cross-referenced to 0001218172. Approve the complete reference, rating, drive end, mounting face, pinion and terminals against the removed unit or signed sample so a nearby version is not substituted into the purchasing line.

Build the approval trail for 0001218172 around three items: the complete 0001218172 / 0986017430 / DRS7430 / 0001218772 / 11180180 reference group, the Deutz vehicles and equipment cross-referenced to 0001218172 application record and the accepted physical sample. Those controls should follow the product from quotation through receiving and warranty review. They also help a distributor separate genuine repeat demand from an inquiry for a nearby starter that shares only part of the number.

0001218172 Starter Motor B2B Production and Test Video for Fleet Replacement

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 0001218172.

0001218172 Starter Motor Distributor Specifications for Wholesale Supply

0001218172 Starter Motor OE Cross-Reference Review for Distributor Sourcing

Use 0001218172 as the primary purchasing reference and cross-check 0986017430, DRS7430, 0001218772, 11180180. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

0001218172 Starter Motor Bulk Fitment Approval for Bulk Procurement

Confirm the complete 0001218172 / 0986017430 / DRS7430 / 0001218772 / 11180180 group together with the 12V, 2.2kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

0001218172 Starter Motor Wholesale Receiving Inspection for B2B Supply

For a wholesale shipment, sample units across the 0001218172 lot rather than inspecting only the top carton. Compare reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

0001218172 Starter Motor MOQ and Private-Label Supply for Aftermarket Buyers

0001218172 Starter Motor Distributor FAQ for Fleet Replacement

Can 0001218172 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on 0001218172 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product prior to instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 0001218172?

Use 0001218172 as the control reference and compare the complete group 0001218172 / 0986017430 / DRS7430 / 0001218772 / 11180180. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that supporting evidence to one quotation and purchase line so repeat orders remain traceable.

Where is 0001218172 commonly used, and what still needs confirmation?

Confirm the complete 0001218172 / 0986017430 / DRS7430 / 0001218772 / 11180180 group together with the 12V, 2.2kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on 0001218172?

Confirm the complete 0001218172 / 0986017430 / DRS7430 / 0001218772 / 11180180 group together with the 12V, 2.2kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched 0001218172 order?

Confirm the complete 0001218172 / 0986017430 / DRS7430 / 0001218772 / 11180180 group together with the 12V, 2.2kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering 0001218172?

Compare the equipment and engine document, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Inspect bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment document is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for 0001218172?

Tie every carton and sampled unit to 0001218172, the approved cross-reference set and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

Can a similar 12V starter replace 0001218172?

A substitute is acceptable only when its complete OE relationship, 12V system, 2.2kW rating, 11T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Request a B2B Quote for 0001218172 Starter Motors

Send the complete reference, Deutz vehicles and equipment cross-referenced to 0001218172, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.