3708010-C52D Deutz Starter Motor 24V 7.0kW 10T

3708010-C52D Heavy-Duty Starter Motor for DACHAI DEUTZ BF6M1013-26 / BF4M1013-26

For fleet-parts buyers planning replenishment, 3708010-C52D is an aftermarket heavy-duty starter motor for DACHAI DEUTZ BF6M1013-26 / BF4M1013-26. Its 24V system, 7.0kW output and 10T pinion give heavy-duty parts distributors, importers and fleet suppliers a clear product definition for OE-reference replacement and repeat-order sourcing.

For private-label buyers preparing distributor pricing, the commercial value is a clearly identified starter rather than a generic visual match. Buyers can use the OE group, application, product images and technical data together, while neutral packaging and private-label review can be discussed for qualified bulk orders.

3708010-C52D Starter Motor Specifications and Technical Drawing

For technical sales teams confirming the stated application, this reference group can cover nearby starter versions. Keep 3708010-C52D, 24V, 7.0kW and 10T together on the RFQ, then compare the flange, drive end and terminal layout before treating another number as a direct replacement.

For fitment reviewers checking version-defining data, the source-faithful technical drawing records the available mounting information for 3708010-C52D, including 71.5 mm, 28±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

3708010-C52D Aftermarket Replacement and Application

For purchasing teams comparing nearby starter versions, the replacement search starts with 3708010-C52D, S3708010-D286, 0001368001 and the DACHAI DEUTZ BF6M1013-26 / BF4M1013-26 application. For mixed fleets or previously repaired machines, add clear old-unit photos so a substituted starter does not become the only fitment evidence.

For distributors preparing a technical RFQ, the starter being replaced should agree with the approved drive-end, side and rear views. Confirm the 10T pinion and module 3, then keep any different flange or terminal layout outside the current quote position.

3708010-C52D Wholesale Supply for Distributors and Importers

For aftermarket product managers defining label requirements, wholesale enquiries for 3708010-C52D can combine product matching with packaging and inspection planning. Elecdura offers neutral packaging and private-label review for qualified orders, with 20 pcs MOQ, 7–15 days subject to confirmation and an 18-month warranty under agreed terms.

For engine-parts specialists confirming commercial terms, define the reference group, accepted product version, inspection request and packaging standard before production. Those records help both sides manage replenishment and resolve any receiving question efficiently.

3708010-C52D Starter Motor Buyer FAQ

What should purchasing verify first for 24V system compatibility when checking a replacement proposal?

For importers preparing a technical RFQ, 3708010-C52D is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement during pre-order review. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

How should a distributor confirm 3708010-C52D cartons and units during fitment review?

For inventory buyers defining label requirements, sample cartons from different positions in the shipment and compare the 3708010-C52D labels, 24V marking, 10-tooth pinion, flange shape and terminal protection with the order specification. Photograph any mixed marking, damaged terminal or different drive end at the installation review, and isolate those pieces so the rest of the lot can be assessed consistently.

How can a buyer screen module 3 before a purchase order is released?

For maintenance suppliers comparing the flange and terminals, module 3 is part of the gear geometry for 3708010-C52D. Confirm it together with the 10-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

What should receiving teams compare on 3708010-C52D locating face during an application review?

For equipment-parts dealers reviewing a replacement proposal, the 3708010-C52D flange should sit flat against the DACHAI DEUTZ BF6M1013-26 / BF4M1013-26 mounting surface without being pulled into place by the bolts. Clean both faces and compare the locating shoulder, hole pattern and any stated diameters. Rocking, a visible gap or bolt misalignment indicates that the version check is incomplete and installation should stop.

Which specification deserves priority for 3708010-C52D replenishment before stock is assigned?

For purchasing teams updating a customer item master, keep 3708010-C52D, 24V, 7.0kW, 10T, the application description and the agreed packaging on the same replenishment line. Add dated photos when the equipment fleet changes or a different unit taken from service appears. This gives purchasing and warehouse teams enough detail to avoid silently merging a new version into established stock.

Which detail separates 3708010-C52D rear-terminal photograph before comparing delivery options?

For distributors checking application evidence, use the rear view of 3708010-C52D to identify battery and signal terminals, their direction and the clearance around each stud. Match the customer's photograph from the same orientation and consider cable routing in DACHAI DEUTZ BF6M1013-26 / BF4M1013-26. A correct drive end with an unusable terminal position is not a complete fitment match.

Which check should lead 3708010-C52D inquiry package before an installation slot is booked?

For aftermarket product managers planning a repeat order, A useful inquiry for 3708010-C52D includes quantity, destination, required date, DACHAI DEUTZ BF6M1013-26 / BF4M1013-26, the full old-unit number and clear photos of the label, drive end, front housing and terminal arrangement. State neutral or private-label packaging needs at the same time. Elecdura can then quote the 24V, 7.0kW, 10T version against one unambiguous product description.

What should purchasing verify first for DACHAI DEUTZ BF6M1013-26 / BF4M1013-26 previously replaced starter before stock is assigned?

For engine-parts specialists checking repeat-order specifications, ask whether the starter removed from DACHAI DEUTZ BF6M1013-26 / BF4M1013-26 is original or an earlier replacement. If it has been substituted before, the visible unit may not represent the equipment's initial build. Use its label and geometry together with 3708010-C52D, 24V, 7.0kW and 10T before turning that history into a bulk stocking decision.

Request a Wholesale Quote for 3708010-C52D Heavy-Duty Starter Motor

For regional parts suppliers planning mixed-model inventory, ask for a quote on 3708010-C52D with the full DACHAI DEUTZ BF6M1013-26 / BF4M1013-26 record, quantity and packaging plan. We will verify the requested 24V, 7.0kW and 10T configuration and return the relevant wholesale terms.