10K15S 24V PV8 119 mm Heavy-Duty A/C Compressor for FAW Jiefang JH6 truck

Importer Guide to This 10K15S A/C Compressor

A distributor supporting FAW Jiefang JH6 truck fleets needs the complete drive and mounting description before the unit reaches the workshop. This complete 10K15S replacement uses PV8 119 mm 24V reverse-head 45-degree O-ring 10K15S configuration. For JH6 fleet service where port standard and head clocking prevent hose mismatch, the 24V, PV8 and 119 mm clutch, head and mounting arrangement define the physical build a buyer is ordering.

The intended customer is a distributor or fleet buyer who needs the same configuration again, not a one-off generic reference for FAW Jiefang JH6 truck with 24V, PV8 and 119 mm. Linking the FAW Jiefang JH6 truck application to 24V, PV8 and 119 mm gives that buyer a record suitable for purchasing and later replenishment.

Wholesale A/C Compressor Specifications for FAW Jiefang JH6 truck

The specification block covers this complete compressor rather than the wider A/C circuit for FAW Jiefang JH6 truck with 24V, PV8 and 119 mm. For container consolidation, the workshop should take any oil balance, refrigerant charge and commissioning values from the approved service information for FAW Jiefang JH6 truck.

Fleet Fitment Evidence for the FAW Jiefang JH6 truck A/C Compressor

Start the comparison with an installed overview on FAW Jiefang JH6 truck, because it records belt and hose orientation. Continue with individual clutch, port, connector and mounting views. This sequence gives purchasing and the supplier a common fitment reference during the FAW Jiefang JH6 truck 24V, PV8 and 119 mm review.

Ask the supplier to check the reversed head, 45-degree O-ring ports, eight ribs and 24V connector. Combined with 24V, PV8 and 119 mm, that check can expose an incorrect port direction, pulley or foot pattern before the compressor enters a wholesale shipment.

Fleet Parts Boundaries for This 10K15S A/C Compressor

Flare-port JH6 compressors and 122 mm eight-rib assemblies are separate physical products. A buyer who records that boundary can discuss alternatives without allowing a similar housing to replace the agreed FAW Jiefang JH6 truck configuration.

For a mixed-model shipment, state the quantity of this 10K15S configuration independently. That gives the packer a specific image and description and reduces the chance of warehouse mis-picks.

Fleet Handling Checks for the FAW Jiefang JH6 truck A/C Compressor

At receiving, leave the ports capped while the warehouse checks the carton line against FAW Jiefang JH6 truck, 10K15S and 24V, PV8 and 119 mm. Inspect the clutch, connector, head and mounting ears for transit damage, then retain a few receiving images with the fitment record.

Before installation on FAW Jiefang JH6 truck, the workshop should identify why the previous compressor failed. Belt tracking, hose condition, condenser airflow and contamination may require attention before the new 10K15S unit is commissioned under the correct service procedure.

Distributor RFQ Details for This 10K15S A/C Compressor

Wholesale supply is available for FAW Jiefang JH6 truck fleet projects, repeat distributor stock and consolidated orders. Elecdura keeps this 10K15S build on its own product line so a packaging request cannot hide a change in clutch, voltage or mounting.

the FAW Jiefang JH6 truck RFQ should let the supplier understand both the part and the program; receiving should use the 24V, PV8 and 119 mm reference. Combine the FAW Jiefang JH6 truck fitment details with volume, destination, delivery window and packaging expectations, then attach the confirmed physical views.

Importer FAQ for This 10K15S A/C Compressor

This short FAQ helps purchasing and service teams keep the confirmed FAW Jiefang JH6 truck compressor consistent from enquiry to installation.

What should a wholesale RFQ include for this 10K15S compressor?

A useful RFQ combines the part identity with the commercial program: FAW Jiefang JH6 truck, 24V, PV8 and 119 mm, quantity, destination, schedule and packaging.

How should a buyer confirm the 24V clutch?

Compare the FAW Jiefang JH6 truck electrical circuit with the connector or label evidence on the removed unit. Keep 24V tied to the rest of the confirmed compressor configuration for FAW Jiefang JH6 truck.

What wrong-stock risk applies to this PV8 10K15S compressor?

Flare-port JH6 compressors and 122 mm eight-rib assemblies are separate physical products. Treat that neighboring unit as a different product rather than an automatic 10K15S interchange.

What workshop checks apply before fitting this PV8 10K15S compressor?

The technician should correct the original fault, verify belt alignment and prepare the circuit using the confirmed FAW Jiefang JH6 truck oil and refrigerant process.

Which details belong on the FAW Jiefang JH6 truck compressor order?

The working identity combines the FAW Jiefang JH6 truck application with 10K15S, 24V, PV8 and 119 mm and the confirmed compressor view. On the FAW Jiefang JH6 truck 24V, PV8 and 119 mm order, none of those elements should be dropped from the first-order review.

What receiving checks apply to this PV8 10K15S compressor?

Receiving should reconcile the carton description, 24V, PV8 and 119 mm and visible fitment points for FAW Jiefang JH6 truck. Photograph discrepancies before the unit enters saleable inventory.

Can this FAW Jiefang JH6 truck compressor use private-label packing?

The regional wholesaler can request neutral or branded packing after fitment approval. Artwork, label content and quantity are handled as commercial requirements for FAW Jiefang JH6 truck with 24V, PV8 and 119 mm.

Which photos help confirm this FAW Jiefang JH6 truck compressor?

Provide individual views of the pulley, hose head, electrical lead and mounting feet, plus the compressor installed on FAW Jiefang JH6 truck. The supplier can then compare one feature at a time during the FAW Jiefang JH6 truck 24V, PV8 and 119 mm review.

Ask for Bulk Pricing on the 10K15S A/C Compressor

A first enquiry should include separate clutch, head, connector and mounting photographs plus the commercial requirements in the FAW Jiefang JH6 truck 24V, PV8 and 119 mm order. Repeat buyers can reference the confirmed fitment record when requesting the next 10K15S shipment. Keeping these facts together helps the regional wholesaler compare scope and avoids treating an unconfirmed 10K15S alternative as the quoted product.