10K17A 24V PV10 130 mm left-15-degree flare Heavy-Duty A/C Compressor for FAW Jiefang JH6 truck

FAW Jiefang JH6 truck A/C Compressor for Distributor Stock

Cab cooling repairs on FAW Jiefang JH6 truck trucks often start with a familiar compressor family and end with a clutch or hose mismatch. This complete aftermarket 10K17A A/C compressor is supplied for distributor stock for JH6 hose layouts that look similar in cartons. The page keeps wide-foot PV10 130 mm 24V left-15-degree flare-port configuration together with the 24V, PV10 and 130 mm drive on the stock card, giving the regional wholesaler one coherent product identity.

The assembly can be evaluated as a sample and then retained as a repeat wholesale line; approval should connect the FAW Jiefang JH6 truck application, 24V, PV10 and 130 mm and removed-compressor views so later orders do not depend on housing shape alone.

Distributor Specification Check for the 10K17A A/C Compressor

Use these specifications as the purchase baseline and verify them against the removed compressor. A shared 10K17A family name cannot confirm the pulley, connector, head or feet. Refrigerant and lubrication figures outside the listed product data should come from the service information for FAW Jiefang JH6 truck.

Distributor Fitment Check for the FAW Jiefang JH6 truck A/C Compressor

Start the comparison with an installed overview on FAW Jiefang JH6 truck, because it records belt and hose orientation. Continue with individual clutch, port, connector and mounting views. This sequence gives purchasing and the supplier a common fitment reference.

Ask the supplier to match the left 15-degree flare head, wide feet and ten-rib clutch. Combined with 24V, PV10 and 130 mm, that check can expose an incorrect port direction, pulley or foot pattern before the compressor enters a wholesale shipment.

Distributor Stock Separation for This 10K17A A/C Compressor

Do not merge with straight-rear flare or 45-degree O-ring builds. The comparison matters because two 10K17A bodies can look related while creating different installation outcomes on FAW Jiefang JH6 truck.

For a mixed-model shipment, state the quantity of this 10K17A configuration independently; that gives the packer a specific image and description and reduces the chance of stock mix-ups.

Wholesale A/C Compressor Handling for FAW Jiefang JH6 truck

The warehouse can inspect this FAW Jiefang JH6 truck assembly without opening the sealed ports. Confirm 24V, PV10 and 130 mm, then compare the visible head and feet with the approved image. A damaged or conflicting compressor remains outside available stock until reviewed.

The compressor is one part of the cooling circuit, so a clean installation matters; resolve leaks, restriction, debris or belt misalignment on FAW Jiefang JH6 truck, then commission the assembly with the service values for that exact application.

Private-Label 10K17A A/C Compressor Supply for Importers

Wholesale supply is available for FAW Jiefang JH6 truck fleet projects, repeat distributor stock and consolidated orders; Elecdura keeps this 10K17A build on its own product line so a packaging request cannot hide a change in clutch, voltage or mounting.

If purchasing is comparing suppliers, give each one the same FAW Jiefang JH6 truck application, 24V, PV10 and 130 mm and photo evidence; consistent input produces quotations that are easier to compare on scope, packing and delivery.

Importer FAQ for This 10K17A A/C Compressor

Before quantity is committed, these answers help the buyer connect 24V, PV10 and 130 mm with fitment evidence and ordering requirements.

Is the 10K17A family number enough to confirm fitment?

No. A 10K17A name narrows the search but does not settle the FAW Jiefang JH6 truck fitment; the clutch, voltage, ports, electrical connection and feet remain part of the decision.

What workshop checks apply before fitting this PV10 10K17A compressor?

The technician should correct the original fault, verify belt alignment and prepare the circuit using the approved FAW Jiefang JH6 truck oil and refrigerant process.

What identifies this FAW Jiefang JH6 truck A/C compressor?

Use FAW Jiefang JH6 truck, 10K17A and 24V, PV10 and 130 mm together; add the approved image and the mounting or port detail used to accept this physical build.

Why must the PV10 130 mm clutch stay on the RFQ?

A compressor body may accept several clutch builds, but the vehicle or machine belt path does not; the regional wholesaler should retain this pulley description through quotation and packing.

Can this FAW Jiefang JH6 truck compressor use private-label packing?

That buyer can request neutral or branded packing after fitment approval. Artwork, label content and quantity are handled as commercial requirements.

What should a wholesale RFQ include for this 10K17A compressor?

A useful RFQ combines the part identity with the commercial program: FAW Jiefang JH6 truck, 24V, PV10 and 130 mm, quantity, destination, schedule and packaging.

What wrong-stock risk applies to this PV10 10K17A compressor?

Do not merge with straight-rear flare or 45-degree O-ring builds. Recording that boundary helps the regional wholesaler avoid stock mix-ups during repeat supply.

Which photos help confirm this FAW Jiefang JH6 truck compressor?

Provide individual views of the pulley, hose head, electrical lead and mounting feet, plus the compressor installed on FAW Jiefang JH6 truck. The supplier can then compare one feature at a time.

Ask for Bulk Pricing on the 10K17A A/C Compressor

Importers and fleet buyers can submit an RFQ for this 10K17A assembly with expected demand, delivery location and packing needs; include the approved FAW Jiefang JH6 truck reference views to keep the physical build clear. Once the physical match is accepted, the same stock card can support purchasing, receiving and future distributor replenishment.