10S11A 24V PV8 110mm Heavy-Duty A/C Compressor for FAW Jiefang Huwei truck

Why PV8 110 mm 24V large-pulley build Matters to Heavy-Duty A/C Compressor Buyers

The purchasing case for this FAW Jiefang Huwei truck compressor starts with three concrete checkpoints: 10S11A, 24V and PV8 110mm. These details help wholesalers prevent easy to confuse visually assemblies from entering the same bin. This FAW Jiefang version shares dimensions with a Lovol unit but uses a different vehicle application and connector checkpoint.

10S11A A/C Compressor Data for Wholesale Review

Avoiding Variant Mix-Ups in commercial truck A/C Compressor Stock

For mixed-container orders, use a carton label that repeats the finished assembly layout and the buyer's own SKU. Do not let the 10S11A family name replace 24V and PV8 110mm. Those omitted details are precisely where adjacent compressor variants diverge.

The purchase file for this FAW Jiefang Huwei truck assembly should call out PV8 110 mm 24V large-pulley build as the controlling physical and electrical identity. At the parts counter, the buyer should compare the eight-rib clutch, 110 mm diameter and DJ7011-series electrical plug. The same checkpoints can be reused at RFQ reply, pre-shipment inspection and receiving, keeping 10S11A, 24V and PV8 110mm tied to one build. This FAW Jiefang version shares dimensions with a Lovol unit but uses a different vehicle application and connector checkpoint.

A fleet workshop buyer may describe the need simply as a compressor for FAW Jiefang Huwei truck, yet the order becomes actionable only when PV8 110 mm 24V large-pulley build is recorded. This FAW Jiefang version shares dimensions with a Lovol unit but uses a different vehicle application and connector checkpoint. That difference affects belt alignment, electrical connection or physical installation, so it deserves a visible place in the commercial quote. Keeping the distinction in the item name also helps distributors answer repeat inquiries without rebuilding the fitment check from memory.

Workshop-to-Distributor A/C Compressor Fitment Check for FAW Jiefang Huwei truck

Compare the eight-rib clutch, 110 mm diameter and DJ7011-series electrical plug. That comparison should be made from the same viewing angle used for the product image, because left/right clip positions and top/rear port descriptions can reverse when the compressor is turned. Where no readable OE reference is available on the removed unit, buyers should lead with 10S11A, 24V, PV8 110mm, the application and clear photos of the in-service compressor.

The refrigerant is not stated in the available product information. Do not infer it from another 10S11A version; confirm the vehicle or equipment A/C system before charging. The replacement should be installed only after the belt path, hose reach, connector and mounting alignment are confirmed without forcing components into position. If any dimension differs, stop and compare the removed compressor again.

OEM/ODM Planning for the FAW Jiefang Huwei truck A/C Compressor

Elecdura supports wholesale and aftermarket distributor programs with neutral packing, OEM label and ODM customization options. Standard commercial planning framework uses a 50–100 piece MOQ, a 7–15 day expected dispatch window after configuration approval, and an 18-month warranty. Final terms depend on order mix, packaging, inspection and destination.

Building a Complete RFQ for This Heavy-Duty A/C Compressor

The most effective inquiry combines physical proof and commercial requirements. Include the old-unit photos, label, voltage, pulley measurement, connector, ports, mount, quantity, destination and packaging request. If the buyer is replacing fleet stock, note whether the order is for one vehicle build or several configurations.

Wholesale Questions about the FAW Jiefang Huwei truck Heavy-Duty A/C Compressor

Which original-unit details should a fleet buyer send for this A/C compressor?

Open the review with this stock-defining feature: PV8 110 mm 24V large-pulley build. Then compare the eight-rib clutch, 110 mm diameter and DJ7011-series electrical plug. The 10S11A casting alone does not close the fitment question, because this version combines 24V, PV8 110mm and a particular physical layout for FAW Jiefang Huwei truck. Include those observations and the planned purchase volume in the inquiry so the response addresses this complete unit.

Why can two 10S11A heavy-duty A/C compressors look similar but not fit?

Reject automatic substitution with a nearby version simply because its main case is shared with the 10S11A family. This FAW Jiefang version shares dimensions with a Lovol unit but uses a different vehicle application and connector checkpoint. The buyer team needs agreement on the vehicle voltage, clutch drive, line-entry geometry and body mounting pattern. Any mismatch among those checkpoints defines another SKU that deserves its own photograph, carton mark and quoted line.

How should an importer confirm the refrigerant and oil requirement for this A/C compressor?

The assembly in this offer has 24V and PV8 110mm. Check the electrical system on the vehicle, inspect any old clutch marking and measure the pulley from consistent points rather than estimating from a photograph. Compare the eight-rib clutch, 110 mm diameter and DJ7011-series electrical plug. The right compressor case with a mismatched clutch or belt route still creates a non-fitting replacement and preventable workshop delay.

Is neutral packaging available for wholesale A/C compressor orders?

Branded carton requirements can be discussed once PV8 110 mm 24V large-pulley build and the rest of the assembly identity have been approved. Elecdura's normal commercial planning framework is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. Provide branding artwork, barcode format and box requirements, inspection expectations and destination early enough for them to appear in the priced proposal.

What quantity and lead-time details belong in a distributor RFQ for this A/C compressor?

Build the RFQ around one isolated SKU definition: 10S11A for FAW Jiefang Huwei truck, with 24V, PV8 110mm and PV8 110 mm 24V large-pulley build. Add the volume, destination, trade term, carton style, buyer SKU, barcode and documentation request. When a related item varies by voltage, pulley, connection or attachment, place it on another inquiry row so costing and carton control remain auditable.

How does Elecdura check the image against the compressor configuration?

Take a straight-on photograph of the pulley so its groove form can be counted, then capture the connector, port block and every fixing point from useful side and rear angles. For this FAW Jiefang Huwei truck request, give special attention to PV8 110 mm 24V large-pulley build. Together, the images document the unit geometry for review instead of extrapolating from a broad vehicle description.