ELECDURA NETWORK
Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
//
//
5S14
Lonking
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
5S14 12V A1 142 mm configuration
Lonking 55 / 60 construction equipment 12V version
Lonking 55 / 60 construction equipment 12V version; confirm 5S14, 12V, A1 142 mm, connector, ports and mounting; compare the pulley, clutch voltage, connector, hose ports and complete mounting geometry
| Quantity: | |
|---|---|
Equipment dealers sourcing for Lonking 55 / 60 construction equipment 12V version cannot rely on the compressor family alone when nearby builds use different heads or feet. For Lonking 55 / 60 construction equipment 12V version maintenance where jobsite downtime and wrong-fit freight must be controlled, Elecdura supplies this complete 5S14 compressor with A1 142 mm 12V 5S14 configuration. The stated 12V, A1 and 142 mm configuration remains the reference for quotation, packing and repeat stock.
The intended customer is a distributor or fleet buyer who needs the same configuration again, not a one-off generic reference for Lonking 55 / 60 construction equipment 12V version with 12V, A1 and 142 mm. Linking the Lonking 55 / 60 construction equipment 12V version application to 12V, A1 and 142 mm gives that buyer a record suitable for purchasing and later replenishment.
| Application | Lonking 55 / 60 construction equipment 12V version |
|---|---|
| Compressor model | 5S14 |
| Pulley / clutch | A1 and 142 mm |
| Clutch voltage | 12V |
| Supply form | Complete aftermarket A/C compressor assembly |
| Supplied configuration | A1 142 mm 12V 5S14 configuration |
A distributor can copy the table directly into its stock card, but the old unit still provides the final visual comparison. That matters because 5S14 compressors may share a body family while carrying a different clutch, voltage, connector or hose head for Lonking 55 / 60 construction equipment 12V version.
A useful Lonking 55 / 60 construction equipment 12V version photo set includes the clutch face, connector, port block and both mounting sides of the old unit. Add one installed view for belt alignment and hose direction for Lonking 55 / 60 construction equipment 12V version. For the Lonking 55 / 60 construction equipment 12V version 12V, A1 and 142 mm review, those angles give the supplier more fitment evidence than the label alone.
For this assembly, the buyer needs to compare the pulley, clutch voltage, connector, hose ports and complete mounting geometry during the Lonking 55 / 60 construction equipment 12V version 12V, A1 and 142 mm review. That visual result carries more weight than a general model-family match when a nearby build uses a different clutch or hose layout during the Lonking 55 / 60 construction equipment 12V version 12V, A1 and 142 mm review.
Keep adjacent 5S14 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Lonking 55 / 60 construction equipment 12V version. Keep that distinction in the stock card instead of depending on memory for Lonking 55 / 60 construction equipment 12V version. A nearby 5S14 assembly for Lonking 55 / 60 construction equipment 12V version can share the housing outline while changing the belt, voltage or hose position; receiving should use the 12V, A1 and 142 mm reference.
The warehouse should be able to identify this Lonking 55 / 60 construction equipment 12V version compressor without opening a service manual or relying on the casting alone. A full stock description and the reference image provide that control during the Lonking 55 / 60 construction equipment 12V version 12V, A1 and 142 mm review.
Before this compressor is binned, compare its clutch and connection side with the confirmed Lonking 55 / 60 construction equipment 12V version view. Record any carton damage, bent connector, pulley contact or disturbed port cap and isolate the unit if the finding affects saleable condition for Lonking 55 / 60 construction equipment 12V version.
Installation planning for Lonking 55 / 60 construction equipment 12V version still includes the rest of the A/C circuit. Debris, leakage, belt problems and poor heat rejection should be addressed before the workshop commissions this complete compressor assembly for Lonking 55 / 60 construction equipment 12V version with 12V, A1 and 142 mm.
Importers can request bulk pricing, neutral packing or private-label presentation for this Lonking 55 / 60 construction equipment 12V version compressor. Product identity is settled through 12V, A1 and 142 mm and the fitment evidence before packaging and marking become commercial choices.
If purchasing is comparing suppliers, give each one the same Lonking 55 / 60 construction equipment 12V version application, 12V, A1 and 142 mm and photo evidence. Consistent input produces quotations that are easier to compare on scope, packing and delivery in the Lonking 55 / 60 construction equipment 12V version 12V, A1 and 142 mm order.
The questions below address the fitment and purchasing details most likely to affect a Lonking 55 / 60 construction equipment 12V version wholesale order.
Keep adjacent 5S14 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Lonking 55 / 60 construction equipment 12V version. The alternative should retain its own image and item code until a separate Lonking 55 / 60 construction equipment 12V version approval is complete.
Use uncropped angle shots rather than a collage: clutch, ports, connector, front mount, rear mount and installed position for Lonking 55 / 60 construction equipment 12V version. Keep them with the stock card for repeat purchasing.
List this 5S14 build separately from any neighboring variant and specify how many units are required for Lonking 55 / 60 construction equipment 12V version. Add destination, timing and carton or label expectations.
The A/C parts distributor can request neutral or branded packing after fitment approval. Artwork, label content and quantity are handled as commercial requirements for Lonking 55 / 60 construction equipment 12V version with 12V, A1 and 142 mm.
Use Lonking 55 / 60 construction equipment 12V version, 5S14 and 12V, A1 and 142 mm together. Add the reference image and the mounting or port detail used to accept this physical build for Lonking 55 / 60 construction equipment 12V version.
The order should show this 12V, A1 and 142 mm build independently from other 5S14 units. That structure gives the packer and buyer an unambiguous count for Lonking 55 / 60 construction equipment 12V version with 12V, A1 and 142 mm.
Pulley details are part of the product identity, not optional accessories for Lonking 55 / 60 construction equipment 12V version with 12V, A1 and 142 mm. For Lonking 55 / 60 construction equipment 12V version, the quoted drive should reproduce the alignment evidence from the removed compressor.
Leave the protective caps in place, verify Lonking 55 / 60 construction equipment 12V version and inspect the clutch, connector and feet; receiving should use the 12V, A1 and 142 mm reference. A conflict belongs in quarantine rather than on the Lonking 55 / 60 construction equipment 12V version shelf.
Importers and fleet buyers can submit an RFQ for this 5S14 assembly with expected demand, delivery location and packing needs. Include the confirmed Lonking 55 / 60 construction equipment 12V version reference views to keep the physical build clear. The reply can then keep the confirmed Lonking 55 / 60 construction equipment 12V version configuration visible in pricing, sample review and any later repeat-order reference.
