10S15C 24V A1 142 mm Heavy-Duty A/C Compressor for Lonking excavator

Distributor Photo Check for This 10S15C A/C Compressor

A parts counter can resolve this request faster when the machine plate and removed compressor are photographed during the same workshop visit.

On this single-A 142 mm 24V package build, the decisive instruction is to match ears, rear head and A-section pulley; the A1 142 mm clutch and 24V lead must agree with that view.

Importer Sourcing Brief for the Lonking excavator A/C Compressor

This heavy-duty compressor is positioned for recurring fleet service and wholesale replacement demand tied to Lonking excavator.

A useful RFQ combines the 24V clutch with the A1 142 mm drive and asks the supplier to match ears, rear head and A-section pulley.

Wholesale Configuration of This Lonking excavator A/C Compressor

The 24V coil is the electrical boundary for this Lonking excavator item; the removed-unit connector should support that reading before stock is released. Unlisted Lonking excavator service quantities are not borrowed from a similar 10S15C application, because another installation may use a different system specification.

Distributor Receiving Plan for the single-A 142 mm 24V package A/C Compressor

At receipt, leave the port caps fitted while the warehouse checks the A1 142 mm clutch, 24V connector and the ability to match ears, rear head and A-section pulley.

A new 10S15C compressor on Lonking excavator will not correct a blocked circuit, poor condenser airflow or debris left by the failed unit, so those causes need attention first.

Wholesale SKU Boundaries for This 10S15C A/C Compressor

Keep separate from Lonking 55/60 R12-port 10PA15C products later in the catalog. That distinction belongs in the Lonking excavator product name, image record and warehouse description.

The receiving record should repeat single-A 142 mm 24V package, because a shortened 10S15C description can hide the difference that matters on the machine.

Lonking excavator Fleet and Distributor RFQ for This 10S15C A/C Compressor

Elecdura supplies complete heavy-duty A/C compressors for distributor replenishment, fleet maintenance and qualified private-label programmes.

Bulk buyers should list single-A 142 mm 24V package beside the required quantity and keep private-label artwork separate from the technical confirmation.

10S15C A/C Compressor FAQ for Lonking excavator Wholesale Buyers

The following questions address the purchase decisions most likely to affect this single-A 142 mm 24V package order.

While planning Lonking excavator importer stock, what application evidence should a fleet buyer send for this compressor?

Treat Lonking excavator as the intended application, then compare the machine plate and removed-unit photographs. Equipment revisions can alter brackets, connectors or ports, which is why the parts buyer still needs to match ears, rear head and A-section pulley. The single-A 142 mm 24V package description stays with the quoted unit.

On the Lonking excavator fleet purchase line, which physical check matters most before quoting this compressor?

Photograph the clutch face, head, hose connections and every mounting side on the Lonking excavator machine. One wider image of the Lonking excavator installation should preserve hose and head orientation. The parts buyer must be able to match ears, rear head and A-section pulley for this single-A 142 mm 24V package request.

During a workshop fitment check for Lonking excavator, what information is needed for a bulk compressor offer?

Send the Lonking excavator application, 10S15C identity, quantity and destination with old-unit label and multi-angle photos. Specify single-A 142 mm 24V package and ask the wholesale supplier to match ears, rear head and A-section pulley. Record packaging or parts buyer-brand requirements on a separate Lonking excavator RFQ line so pricing stays attached to the right compressor.

On the Lonking excavator fleet purchase line, which images let the supplier compare this 10S15C assembly?

Provide a straight clutch view, a head-and-port view, both mounting sides and a readable old-unit label from the Lonking excavator installation. Add one wider image while the unit is installed so orientation remains visible. Those angles let the wholesale supplier match ears, rear head and A-section pulley and recognize single-A 142 mm 24V package.

Before quoting Lonking excavator, what should receiving staff inspect on this Lonking excavator compressor?

Match the carton line to single-A 142 mm 24V package, then inspect the A1 142 mm clutch and 24V connection. Record the ports capped while staff check whether they can match ears, rear head and A-section pulley. A conflicting Lonking excavator unit should remain outside available stock.

Before packing Lonking excavator private-label orders, what system checks belong before installation on Lonking excavator?

Find the reason the old Lonking excavator compressor failed before fitting the replacement. For the Lonking excavator workshop, inspect belt tracking, condenser airflow, hoses and circuit cleanliness, then use its machine data for evacuation, refrigerant and oil balance. Those checks protect the single-A 142 mm 24V package assembly from an unresolved system fault.

During distributor review for Lonking excavator, which nearby compressor build should a distributor keep separate?

Record separate from Lonking 55/60 R12-port 10PA15C products later in the catalog. Do not approve a substitution from 10S15C alone. Compare the A1 142 mm clutch, 24V connector, head and ears as a single Lonking excavator assembly.

For a repeat Lonking excavator RFQ, which details separate this Lonking excavator A/C compressor from a family-name match?

The physical confirmation is to match ears, rear head and A-section pulley. Write Lonking excavator, 10S15C, 24V, A1 and 142 mm on the same purchase line. For the Lonking excavator order, that combination describes single-A 142 mm 24V package without asking a family name to carry the whole decision.

Request a Wholesale 10S15C A/C Compressor Quote for Lonking excavator

Send the required quantity, destination and packaging plan with the old-unit label and clear installation photographs. Include single-A 142 mm 24V package and ask Elecdura to match ears, rear head and A-section pulley before the Lonking excavator compressor is priced.