7H15 24V A2 132 mm Heavy-Duty A/C Compressor for Lonking excavator

Importer Guide to This 7H15 A/C Compressor

Jobsite repairs leave little room for a second freight cycle, which makes the physical identity of this Lonking excavator compressor important at quotation stage. The complete aftermarket 7H15 assembly is built around 7H15 24V, A2 and 132 mm configuration. Its 24V, A2 and 132 mm drive and visible mounting layout stay together as one orderable configuration for Lonking excavator jobsite maintenance where wrong-fit freight, hose routing and machine downtime must be controlled.

For Lonking excavator, a recognizable housing does not settle the order. Elecdura therefore quotes the 24V, A2 and 132 mm assembly with an image-based check of the head, connector and feet, which is especially useful for project supply.

Distributor Specification Check for the 7H15 A/C Compressor

The listed fields give the aftermarket purchasing team the product-level facts needed for a quote. They do not replace the machine service specification for Lonking excavator with 24V, A2 and 132 mm. In particular, any oil balance, refrigerant charge or commissioning value omitted from the product data must be confirmed for Lonking excavator.

Importer Photo Review for This 7H15 A/C Compressor

When the plate is incomplete, the removed compressor becomes the strongest physical reference for Lonking excavator. Clear views of the clutch, head, connector and feet preserve the details needed to distinguish this 7H15 build after it leaves the workshop.

Compare the pulley, clutch voltage, connector, suction and discharge ports and complete mounting geometry for Lonking excavator. This product-specific detail, together with 24V, A2 and 132 mm, is what separates a useful fitment review from a generic 7H15 lookup.

Wholesale Variant Control for the Lonking excavator A/C Compressor

Keep other 7H15 versions with a different voltage, pulley, diameter, head, connector, port direction or mounting arrangement on separate stock lines for Lonking excavator. This difference belongs in the distributor's master data and pick note so later Lonking excavator orders reproduce the confirmed build.

Repeat Lonking excavator orders should carry the same product image and configuration used for the original approval. That record is more dependable than choosing from a shelf of compressors by housing shape alone for Lonking fitment with 24V, A2 and 132 mm.

Fleet Handling Checks for the Lonking excavator A/C Compressor

Before this compressor is binned, compare its clutch and connection side with the confirmed 7H15 24V, A2 and 132 mm assembly view. Record any carton damage, bent connector, pulley contact or disturbed port cap and isolate the unit if the finding affects saleable condition for this Lonking 7H15 application.

After fitment is confirmed, the technician still needs the confirmed Lonking replacement line service method. That includes correcting the original cause of failure and applying the specified oil balance, evacuation and refrigerant procedure for Lonking fitment; this order is for the 24V, A2 and 132 mm version.

Distributor RFQ Details for This 7H15 A/C Compressor

This 7H15 configuration can enter a sample order, a fleet replacement program or regular distributor replenishment in the 7H15 24V, A2 and 132 mm assembly 24V, A2 and 132 mm order. Commercial terms are discussed against this confirmed Lonking 7H15 application build, including quantity, packing and buyer-brand requirements.

A repeat-order RFQ can reference the previously confirmed item record; a first order should include fresh compressor angle shots. In both cases, show quantity, destination and the requested delivery schedule for this 7H15 build for Lonking replacement line with 24V, A2 and 132 mm.

Fleet Buyer FAQ for the Lonking excavator A/C Compressor

These buyer questions connect the 7H15 product identity with quotation, receiving and workshop use for Lonking fitment.

What receiving checks apply to this A2 7H15 compressor?

Leave the protective caps in place, verify 7H15 24V, A2 and 132 mm assembly and inspect the clutch, connector and feet; the 24V, A2 and 132 mm specification remains the purchase reference. A conflict belongs in quarantine rather than on this Lonking 7H15 application shelf.

How should mixed 7H15 variants appear on a bulk order?

List application, drive and quantity for every variant, even when housings look alike for Lonking replacement line. Receiving can then reconcile each compressor with its own reference image during the Lonking fitment 24V, A2 and 132 mm review.

Which details belong on the Lonking excavator compressor order?

The working identity combines the 7H15 24V, A2 and 132 mm assembly application with 7H15, 24V, A2 and 132 mm and the confirmed compressor view. On this Lonking 7H15 application 24V, A2 and 132 mm order, none of those elements should be dropped from the first-order review.

Which photos help confirm this Lonking excavator compressor?

Photograph the old 7H15 unit before and after removal. Those images should reveal belt alignment, port direction, connector position and the way it mounts to Lonking replacement line.

What should a wholesale RFQ include for this 7H15 compressor?

List this 7H15 build separately from any neighboring variant and specify how many units are required for Lonking fitment. Add destination, timing and carton or label expectations.

What workshop checks apply before fitting this A2 7H15 compressor?

Fitment approval is only the first step. The workshop also needs the exact application service data and a clear reason for the old compressor's failure for 7H15 24V, A2 and 132 mm assembly with 24V, A2 and 132 mm.

Can this Lonking excavator compressor use private-label packing?

Qualified programs may use buyer-brand labels or agreed cartons for this Lonking 7H15 application with 24V, A2 and 132 mm. The Lonking replacement line product record remains fixed so packaging cannot blur a variant difference.

What wrong-stock risk applies to this A2 7H15 compressor?

Keep other 7H15 versions with a different voltage, pulley, diameter, head, connector, port direction or mounting arrangement on separate stock lines for Lonking fitment. The alternative should retain its own image and item code until a separate 7H15 24V, A2 and 132 mm assembly approval is complete.

Request a Wholesale 7H15 A/C Compressor Quote

Importers and fleet buyers can submit an RFQ for this 7H15 assembly with expected demand, delivery location and packing needs in this Lonking 7H15 application 24V, A2 and 132 mm order. Include the confirmed Lonking replacement line reference views to keep the physical build clear. The result is a quotation built around the confirmed 24V, A2 and 132 mm compressor rather than a broad family description.