Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
//
//
5S14
Komatsu
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
5S14 24V B1 146 mm configuration
Komatsu Dash-6 construction equipment
Komatsu Dash-6 construction equipment; confirm 5S14, 24V, B1 146 mm, connector, ports and mounting; compare the pulley, clutch voltage, connector, hose ports and complete mounting geometry
| Quantity: | |
|---|---|
Equipment dealers sourcing for Komatsu Dash-6 construction equipment cannot rely on the compressor family alone when nearby builds use different heads or feet. This complete 5S14 replacement uses B1 146 mm 24V 5S14 configuration. For Komatsu Dash-6 construction equipment maintenance where jobsite downtime and wrong-fit freight must be controlled, the 24V, B1 and 146 mm clutch, head and mounting arrangement define the physical build a buyer is ordering.
For Komatsu Dash-6 construction equipment, a recognizable housing does not settle the order. Elecdura therefore quotes the 24V, B1 and 146 mm assembly with an image-based check of the head, connector and feet, which is especially useful for regional replenishment.
| Application | Komatsu Dash-6 construction equipment |
|---|---|
| Compressor model | 5S14 |
| Pulley / clutch | B1 and 146 mm |
| Clutch voltage | 24V |
| Supply form | Complete aftermarket A/C compressor assembly |
| Supplied configuration | B1 146 mm 24V 5S14 configuration |
The table describes one saleable assembly rather than a menu of interchangeable options for Komatsu Dash-6 construction equipment with 24V, B1 and 146 mm. On this Komatsu Dash-6 construction equipment line, 24V belongs with the B1 clutch and 146 mm diameter. System charge and oil values that are not published here remain subject to the approved service data for the exact installation for Komatsu Dash-6 construction equipment with 24V, B1 and 146 mm.
A useful Komatsu Dash-6 construction equipment photo set includes the clutch face, connector, port block and both mounting sides of the old unit. Add one installed view for belt alignment and hose direction for Komatsu Dash-6 construction equipment. For the Komatsu Dash-6 construction equipment 24V, B1 and 146 mm review, those angles give the supplier more fitment evidence than the label alone.
The approval photographs should make it possible to compare the pulley, clutch voltage, connector, hose ports and complete mounting geometry during the Komatsu Dash-6 construction equipment 24V, B1 and 146 mm review. If the visible evidence does not support that point, keep the Komatsu Dash-6 construction equipment enquiry open instead of selecting by appearance.
Keep adjacent 5S14 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Komatsu Dash-6 construction equipment. The safest stock decision is to keep that neighboring build separate until its clutch, ports and mounting pattern have their own approval during the Komatsu Dash-6 construction equipment 24V, B1 and 146 mm review.
If a distributor stocks both Komatsu Dash-6 construction equipment versions, use different item codes and bin references; receiving should use the 24V, B1 and 146 mm reference. The separation makes the Komatsu Dash-6 construction equipment configuration visible during quotation, receiving, picking and warranty review.
At receiving, leave the ports capped while the warehouse checks the carton line against Komatsu Dash-6 construction equipment, 5S14 and 24V, B1 and 146 mm. Inspect the clutch, connector, head and mounting ears for transit damage, then retain a few receiving images with the stock card.
Workshop preparation affects the life of this 5S14 assembly as much as the part choice. The Komatsu Dash-6 construction equipment system should be checked for contamination, leakage, belt alignment and airflow before charging and commissioning.
Fleet and aftermarket buyers can discuss volume pricing for this Komatsu Dash-6 construction equipment compressor after the old-unit comparison is complete. That sequence lets commercial customization proceed without weakening the product identity for Komatsu Dash-6 construction equipment with 24V, B1 and 146 mm.
For container planning, state how many units of this exact 5S14 configuration are required and whether cartons need buyer marks for Komatsu Dash-6 construction equipment with 24V, B1 and 146 mm. The heavy-duty importer should keep any neighboring variant on a separate line.
For this 5S14 build, buyers usually need clear answers on physical identity, variant control, packing and service preparation in the Komatsu Dash-6 construction equipment 24V, B1 and 146 mm order.
Keep adjacent 5S14 versions with a different voltage, pulley, port direction or mounting layout on separate stock lines for Komatsu Dash-6 construction equipment. The distinction should remain visible from RFQ through receiving, even when both compressors share familiar castings in the Komatsu Dash-6 construction equipment 24V, B1 and 146 mm order.
The stock card should carry Komatsu Dash-6 construction equipment, 5S14, 24V, B1 and 146 mm and a reference image. Together they give purchasing and receiving the same product definition for Komatsu Dash-6 construction equipment with 24V, B1 and 146 mm.
Photograph the old 5S14 unit before and after removal. Those images should reveal belt alignment, port direction, connector position and the way it mounts to Komatsu Dash-6 construction equipment.
Leave the protective caps in place, verify Komatsu Dash-6 construction equipment and inspect the clutch, connector and feet, with 24V, B1 and 146 mm retained on the stock record. A conflict belongs in quarantine rather than on the Komatsu Dash-6 construction equipment shelf.
A compressor body may accept several clutch builds, but Komatsu Dash-6 construction equipment belt path does not; receiving should use the 24V, B1 and 146 mm reference. That buyer should retain this pulley description through quotation and packing in the Komatsu Dash-6 construction equipment 24V, B1 and 146 mm order.
Find the cause of the previous failure and inspect belt tracking, airflow, hoses and circuit cleanliness for Komatsu Dash-6 construction equipment. Commission the replacement under the service procedure for Komatsu Dash-6 construction equipment.
State the 5S14 application, required volume, shipping country and delivery target for Komatsu Dash-6 construction equipment with 24V, B1 and 146 mm. Attach the removed-compressor views and note any neutral or buyer-brand packing request.
Private-label presentation is available for suitable wholesale orders. It changes packaging and marking, not the confirmed 24V, B1 and 146 mm compressor build.
For a wholesale quote, provide the Komatsu Dash-6 construction equipment application, 5S14, 24V, B1 and 146 mm, quantity and shipping country. Add the removed-compressor views so Elecdura can review the visible fitment points before discussing delivery and packing. This information allows the quotation to separate the 24V, B1 and 146 mm build from nearby 5S14 variants and state the requested packing clearly.
