7H15 24V B1 145 mm Heavy-Duty A/C Compressor for Komatsu PC120 excavator

Fleet Replacement 7H15 A/C Compressor for Komatsu PC120 excavator

Jobsite repairs leave little room for a second freight cycle, which makes the physical identity of this Komatsu PC120 excavator compressor important at quotation stage. This complete 7H15 replacement uses B1 145 mm 24V 7H15 configuration. For Komatsu PC120 excavator maintenance where jobsite downtime and wrong-fit freight must be controlled, the 24V, B1 and 145 mm clutch, head and mounting arrangement define the physical build a buyer is ordering.

The commercial value is clarity at handover: purchasing sees Komatsu PC120 excavator, the warehouse sees 24V, B1 and 145 mm, and the workshop sees the visible mounting layout. Those details allow the fleet parts team to assess the whole assembly before it enters stock.

Importer Specification Sheet for This 7H15 A/C Compressor

For stock control, retain 24V, B1 and 145 mm with the Komatsu PC120 excavator application and the complete-assembly description. Shortening the line to 7H15 alone removes the details most likely to separate two look-alike units for Komatsu PC120 excavator. Vehicle-system values not shown in the table are confirmed from the specific service documentation for Komatsu PC120 excavator with 24V, B1 and 145 mm.

Importer Photo Review for This 7H15 A/C Compressor

A useful Komatsu PC120 excavator photo set includes the clutch face, connector, port block and both mounting sides of the old unit. Add one installed view for belt alignment and hose direction for Komatsu PC120 excavator. For the Komatsu PC120 excavator 24V, B1 and 145 mm review, those angles give the supplier more fitment evidence than the label alone.

Compare the pulley, clutch voltage, connector, suction and discharge ports and complete mounting geometry for Komatsu PC120 excavator. Record the result beside 24V, B1 and 145 mm and the Komatsu PC120 excavator application so receiving can use the same evidence as purchasing.

Importer Comparison Notes for the Komatsu PC120 excavator A/C Compressor

Keep nearby 7H15 versions with another voltage, pulley, port direction or mounting layout on separate stock lines for Komatsu PC120 excavator. That is the practical boundary between this Komatsu PC120 excavator product and the nearest look-alike, with 24V, B1 and 145 mm retained on the stock record. Purchasing can preserve it by retaining the configuration on the purchase record for Komatsu PC120 excavator.

For mixed inventory, store the confirmed Komatsu PC120 excavator image beside the full application and drive description. Receiving then has a quick visual reference and is less likely to combine two physical variants under a shortened stock name for Komatsu PC120 excavator with 24V, B1 and 145 mm.

Importer Receiving Review for This 7H15 A/C Compressor

Incoming inspection for this 7H15 line can be short and specific: confirm the Komatsu PC120 excavator application, 24V, B1 and 145 mm and the visible mounting layout. Those observations protect the Komatsu PC120 excavator distributor's stock record and any later fleet claim; this order is for the 24V, B1 and 145 mm version.

The old-unit failure provides useful service evidence. Before fitting the 24V, B1 and 145 mm replacement to Komatsu PC120 excavator, inspect the belt path, hoses, airflow and circuit condition and correct the fault that could damage the new compressor.

Bulk Komatsu PC120 excavator A/C Compressor Supply for Distributors

Elecdura supports wholesale enquiries for this 24V, B1 and 145 mm compressor, from initial evaluation to planned mixed-model purchasing. Neutral or private-label presentation is available for suitable programs once the Komatsu PC120 excavator fitment has been approved.

the Komatsu PC120 excavator RFQ should let the supplier understand both the part and the program, with 24V, B1 and 145 mm retained on the stock record. Combine the Komatsu PC120 excavator fitment details with volume, destination, delivery window and packaging expectations, then attach the confirmed physical views.

Importer FAQ for This 7H15 A/C Compressor

For this 7H15 build, buyers usually need clear answers on physical identity, variant control, packing and service preparation in the Komatsu PC120 excavator 24V, B1 and 145 mm order.

What identifies this Komatsu PC120 excavator A/C compressor?

The purchase record should carry Komatsu PC120 excavator, 7H15, 24V, B1 and 145 mm and a reference image. Together they give purchasing and receiving the same product definition for Komatsu PC120 excavator with 24V, B1 and 145 mm.

How should a buyer confirm the 24V clutch?

The buyer should verify 24V from application evidence and the removed compressor before ordering for Komatsu PC120 excavator with 24V, B1 and 145 mm. A voltage change can accompany other physical differences that are easy to miss for Komatsu PC120 excavator with 24V, B1 and 145 mm.

What workshop checks apply before fitting this B1 7H15 compressor?

Check the surrounding A/C system before fitting the 7H15 unit for Komatsu PC120 excavator with 24V, B1 and 145 mm. Leakage, debris, poor airflow or a belt problem can damage the Komatsu PC120 excavator replacement if left unresolved; the 24V, B1 and 145 mm specification remains the purchase reference.

Which photos help confirm this Komatsu PC120 excavator compressor?

Provide individual views of the pulley, hose head, electrical lead and mounting feet, plus the compressor installed on Komatsu PC120 excavator. The supplier can then compare one feature at a time during the Komatsu PC120 excavator 24V, B1 and 145 mm review.

Can this Komatsu PC120 excavator compressor use private-label packing?

Private-label presentation is available for suitable wholesale orders. It changes packaging and marking, not the confirmed 24V, B1 and 145 mm compressor build.

What should a wholesale RFQ include for this 7H15 compressor?

Provide Komatsu PC120 excavator, 24V, B1 and 145 mm, quantity, destination and packing requirements. Include old-unit views that show the clutch, head, connector and mounts for Komatsu PC120 excavator.

What wrong-stock risk applies to this B1 7H15 compressor?

Keep nearby 7H15 versions with another voltage, pulley, port direction or mounting layout on separate stock lines for Komatsu PC120 excavator. The alternative should retain its own image and item code until a separate Komatsu PC120 excavator approval is complete.

Is the 7H15 family number enough to confirm fitment?

A matching 7H15 casting can still carry the wrong clutch or hose direction during the Komatsu PC120 excavator 24V, B1 and 145 mm review. Fitment is confirmed only when those physical details also match Komatsu PC120 excavator.

Request a Wholesale 7H15 A/C Compressor Quote

A first enquiry should include separate clutch, head, connector and mounting photographs plus the commercial requirements in the Komatsu PC120 excavator 24V, B1 and 145 mm order. Repeat buyers can reference the confirmed purchase record when requesting the next 7H15 shipment. The final offer can address product identity, volume, lead time and presentation without mixing this Komatsu PC120 excavator assembly with a similar configuration.