DCP99821 10S15C Heavy-Duty A/C Compressor for Komatsu PC200-7

Komatsu Excavator A/C Compressor Supply for DCP99821 Buyers

DCP99821 is not simply another 10S15C body for a shelf of look-alike compressors. For a Komatsu PC200-7 or PC300 parts enquiry, the useful purchasing identity is the complete 24V assembly with its single B-section 152 mm clutch, direct mounting arrangement and matching hose interface. Keeping those points together gives an excavator-parts distributor a record that can be quoted, received and reordered without reducing the item to a family name.

The Komatsu reference 20Y-979-6121 and DCP99821 should remain on the same buyer line. Public catalogs confirm that relationship, while the supplier catalog controls the offered pulley diameter and complete product configuration. A first order should include the old-unit label plus separate front, rear and port-side photographs so the warehouse and workshop can approve the exact assembly before quantity pricing is finalized.

DCP99821 Heavy-Duty A/C Compressor Specifications for Distributors

The table is intended for quotation control, not for automatic substitution. A 10S15C casting can appear in other heavy-equipment applications with a different clutch, head or mount. Oil quantity and installation procedure must follow the approved machine service information; public lubricant references are supporting evidence only and do not override the supplier catalog or the requirements of the actual A/C circuit.

Distributor Fitment Review for the Komatsu 10S15C A/C Compressor

Begin at the belt side. Confirm a single B-section groove, measure the clutch diameter by one consistent method and verify the 24V electrical connection. Then compare the direct-mount faces, rear head, hose block and connector clocking with the removed unit. Photographs should be taken from comparable angles because a rotated compressor can make port direction appear reversed.

Machine model alone is not enough for a first shipment. PC200 and PC300 fleets can include serial-range differences or earlier HVAC repairs. The strongest approval combines 20Y-979-6121, the DCP99821 cross reference and a physical comparison. If any one of those points conflicts, the order remains on hold until the buyer supplies a clearer label or interface view.

Wholesale Variant Control for DCP99821 Komatsu A/C Compressor Stock

The large 152 mm single-groove clutch is the quickest visual separator from smaller-pulley or multi-rib Komatsu compressors. The 10S15C housing also keeps this line apart from the older 10PA15C PC200-6 product. Those two Komatsu assemblies may serve neighboring machines, but they should never share one SKU, carton label or receiving record.

For branch inventory, use one buyer item code for DCP99821 / 20Y-979-6121 and repeat 24V, B1 and 152 mm on the quotation and packing list. This prevents a generic “Komatsu compressor” description from merging physically different units when several excavator programs are consolidated into one shipment.

Fleet Receiving and Service Checks for This Komatsu A/C Compressor

Goods-in staff should inspect the clutch face, connector, mounting surfaces, shipping plugs and exposed head for damage before opening the ports. The product image and approved old-unit views belong with the receiving record. A compressor that arrives with a different groove, voltage connector, mount or hose block stays outside saleable inventory until it is reviewed.

Installation remains a workshop decision. Before fitting the replacement, diagnose why the previous compressor failed, check belt tracking, condenser airflow, hoses and circuit cleanliness, and follow the machine procedure for oil balance, evacuation and R134a charging. A correct DCP99821 assembly cannot correct contamination or another unresolved system fault.

Wholesale Komatsu A/C Compressor Programs for Importers

Elecdura can review DCP99821 for excavator-parts importers, Komatsu service distributors and fleets planning repeat maintenance stock. Neutral cartons, buyer labels and private-label presentation can be discussed after the sample configuration is accepted. Packaging changes the commercial presentation only; it does not change the approved 24V, B1 152 mm product identity.

For a comparable quotation, send quantity, destination, target schedule and packing requirements with the machine application and removed-unit photographs. Mixed Komatsu compressor variants should be placed on separate RFQ lines so pricing, image approval, carton counts and later warranty records remain traceable.

Komatsu A/C Compressor FAQ for Wholesale and Fleet Buyers

These questions focus on the product decisions a distributor makes before DCP99821 becomes approved stock.

Which references belong on a wholesale DCP99821 A/C Compressor RFQ?

Use DCP99821 and 20Y-979-6121 together, then add 10S15C, 24V, B1 and 152 mm. Include the Komatsu machine model and clear pictures of the old compressor rather than relying on a shortened family description.

How should a distributor verify the 152 mm A/C Compressor clutch?

Confirm the single B-section groove, measure the clutch diameter consistently and compare the face and electrical lead with the removed unit. Record the accepted image with the buyer SKU before sample approval.

What separates this Komatsu A/C Compressor from the PC200-6 line?

This product uses the 10S15C configuration controlled by DCP99821 / 20Y-979-6121. The PC200-6 item in this catalog uses a 10PA15C body and must remain a separate product even when both have 24V single-groove clutches.

Which images help an importer approve this Heavy-Duty A/C Compressor?

Provide separate pulley-face, connector, rear-head, hose-interface and mounting views. Individual angles are easier to audit than a collage and are more useful for repeat orders and warehouse checks.

What should receiving inspect on the DCP99821 A/C Compressor?

Check the carton identity, clutch, 24V connection, head, mounts and protective plugs against the approved record. Any visible mismatch or transit damage should be quarantined before the ports are opened.

Can this Komatsu A/C Compressor use private-label packaging?

Private-label or neutral packaging can be quoted for suitable wholesale volumes after the physical assembly is approved. The label must preserve the buyer SKU and the controlled DCP99821 configuration.

What workshop preparation applies before fitting this A/C Compressor?

Investigate the old failure, inspect the belt drive and remaining circuit, and use the approved Komatsu service procedure for oil, evacuation and charge. Product identification and installation procedure are separate controls.

How should mixed Komatsu A/C Compressor variants appear on a bulk order?

Give every physical configuration its own RFQ line, quantity, image reference and buyer code. This keeps a nearby 10PA15C or different-pulley 10S15C unit from being packed as DCP99821.

Request a Wholesale Quote for the DCP99821 Komatsu A/C Compressor

Send DCP99821 / 20Y-979-6121, the Komatsu application, requested quantity, destination and packing plan with individual photos of the old clutch, connector, ports and mounts. Elecdura can then review the exact 10S15C 24V B1 152 mm assembly and prepare an importer or fleet quotation without treating an unverified Komatsu compressor as an automatic alternative.