6K17C 24V PV8 119 mm left-15-degree flare Heavy-Duty A/C Compressor for FAW Jiefang JH6 truck

FAW Jiefang JH6 truck A/C Compressor for Distributor Stock

Cab cooling repairs on FAW Jiefang JH6 trucks often start with a familiar compressor family and end with a clutch or hose mismatch. For JH6 stock control where ear count is as important as the clutch, Elecdura supplies this complete 6K17C compressor with narrow right four-ear PV8 119 mm 24V left-15-degree flare 6K17C configuration. The stated 24V, PV8 and 119 mm configuration remains the reference for quotation, packing and repeat stock.

The intended customer is a distributor or fleet buyer who needs the same configuration again, not a one-off generic reference for FAW Jiefang JH6 truck with 24V, PV8 and 119 mm. Linking the FAW Jiefang JH6 truck application to 24V, PV8 and 119 mm gives that buyer a record suitable for purchasing and later replenishment.

FAW Jiefang JH6 truck A/C Compressor Data for Fleet Buyers

The specification block covers this complete compressor rather than the wider A/C circuit for FAW Jiefang JH6 truck with 24V, PV8 and 119 mm. For project supply, the workshop should take any oil balance, refrigerant charge and commissioning values from the approved service information for FAW Jiefang JH6 truck.

Fleet Fitment Evidence for the FAW Jiefang JH6 truck A/C Compressor

A good approval set answers four physical questions: how the belt meets the clutch, where the connector sits, which way the ports face and how the compressor bolts to FAW Jiefang JH6 truck. The reference photos should make each answer visible without a collage for FAW Jiefang JH6 truck with 24V, PV8 and 119 mm.

The decisive step is to check the right-side four-ear mount, eight ribs and left-angled flare head. Keep the PV8 drive and 24V clutch consistent with this entry even when another 6K17C unit has a familiar casting.

Fleet Parts Boundaries for This 6K17C A/C Compressor

Eight-ear J6 products and reverse-head O-ring JH6 products are separate assemblies. A buyer who records that boundary can discuss alternatives without allowing a similar housing to replace the agreed FAW Jiefang JH6 truck configuration.

Where cross references overlap, retain the application and visible configuration on the buyer's order for FAW Jiefang JH6 truck; receiving should use the 24V, PV8 and 119 mm reference. Those fields help the FAW Jiefang JH6 truck distributor decide whether a proposed interchange is a true replacement or merely a similar family; the 24V, PV8 and 119 mm specification remains the purchase reference.

Importer Receiving Review for This 6K17C A/C Compressor

Before this compressor is binned, compare its clutch and connection side with the confirmed FAW Jiefang JH6 truck view. Record any carton damage, bent connector, pulley contact or disturbed port cap and isolate the unit if the finding affects saleable condition for FAW Jiefang JH6 truck.

After fitment is confirmed, the technician still needs the confirmed FAW Jiefang JH6 truck service method. That includes correcting the original cause of failure and applying the specified oil balance, evacuation and refrigerant procedure for FAW Jiefang JH6 truck, with 24V, PV8 and 119 mm retained on the stock record.

Bulk FAW Jiefang JH6 truck A/C Compressor Supply for Distributors

For regional importers, the FAW Jiefang JH6 truck application can be combined with other confirmed heavy-duty compressor lines in one shipment. Each physical build retains its own image, quantity and stock card through packing.

When requesting a sample, identify the target FAW Jiefang JH6 truck and the expected annual demand. the same FAW Jiefang JH6 truck enquiry can state whether the buyer needs neutral packing, branded labels or consolidation with other compressor models; receiving should use the 24V, PV8 and 119 mm reference.

Fleet Buyer FAQ for the FAW Jiefang JH6 truck A/C Compressor

Before quantity is committed, these answers help the buyer connect 24V, PV8 and 119 mm with fitment evidence and ordering requirements.

What should a wholesale RFQ include for this 6K17C compressor?

List this 6K17C build separately from any neighboring variant and specify how many units are required. Add destination, timing and carton or label expectations.

Which photos help confirm this FAW Jiefang JH6 truck compressor?

Photograph the old 6K17C unit before and after removal. Those images should reveal belt alignment, port direction, connector position and the way it mounts to FAW Jiefang JH6 truck.

What wrong-stock risk applies to this PV8 6K17C compressor?

Eight-ear J6 products and reverse-head O-ring JH6 products are separate assemblies. The alternative should retain its own image and item code until a separate FAW Jiefang JH6 truck approval is complete.

Can this FAW Jiefang JH6 truck compressor use private-label packing?

Private-label presentation is available for suitable wholesale orders. It changes packaging and marking, not the confirmed 24V, PV8 and 119 mm compressor build.

Why must the PV8 119 mm clutch stay on the RFQ?

The PV8 119 mm clutch defines how this compressor meets the FAW Jiefang JH6 truck belt path. Changing it can turn a plausible unit into a non-fitting assembly for FAW Jiefang JH6 truck with 24V, PV8 and 119 mm.

Why does port direction matter on this 6K17C compressor?

A different head can change outlet angle, fitting style or service access during the FAW Jiefang JH6 truck 24V, PV8 and 119 mm review. Compare the offered 6K17C port block directly with the removed compressor before shipment.

How should a buyer describe this 6K17C compressor?

Describe the unit as the 24V, PV8 and 119 mm 6K17C assembly for FAW Jiefang JH6 truck, then attach the reference photos. That is more specific than a model-family number by itself for FAW Jiefang JH6 truck with 24V, PV8 and 119 mm.

How should mixed 6K17C variants appear on a bulk order?

Use one item code per confirmed configuration and avoid combining quantities under the 6K17C family. The packing list should preserve the same separation.

Send an RFQ for This FAW Jiefang JH6 truck A/C Compressor

Send Elecdura the required quantity, destination and packing plan with the old-unit label and separate installation views in the FAW Jiefang JH6 truck 24V, PV8 and 119 mm order. We will compare FAW Jiefang JH6 truck, 24V, PV8 and 119 mm, the connector, head and mounting layout before preparing the quotation. The final offer can address product identity, volume, lead time and presentation without mixing this FAW Jiefang JH6 truck assembly with a similar configuration.