6K17C 24V PV8 122 mm four-ear Heavy-Duty A/C Compressor for FAW Jiefang Aowei J6 four-ear truck

Importer Guide to This 6K17C A/C Compressor

Cab cooling repairs on FAW Jiefang Aowei J6 four-ear trucks often start with a familiar compressor family and end with a clutch or hose mismatch. For Aowei J6 repairs where mounting-ear count prevents a costly mis-pick, Elecdura supplies this complete 6K17C compressor with narrow right four-ear PV8 122 mm 24V rear-flare 6K17C configuration. The stated 24V, PV8 and 122 mm configuration remains the reference for quotation, packing and repeat stock.

The intended customer is a distributor or fleet buyer who needs the same configuration again, not a one-off generic reference for FAW Jiefang Aowei J6 four-ear truck with 24V, PV8 and 122 mm. Linking the FAW Jiefang Aowei J6 four-ear truck application to 24V, PV8 and 122 mm gives that buyer a record suitable for purchasing and later replenishment.

Distributor Specification Check for the 6K17C A/C Compressor

The table describes one saleable assembly rather than a menu of interchangeable options for FAW Jiefang Aowei J6 four-ear truck with 24V, PV8 and 122 mm. On this FAW Jiefang Aowei J6 four-ear truck line, 24V belongs with the PV8 clutch and 122 mm diameter. System charge and oil values that are not published here remain subject to the approved service data for the exact installation for FAW Jiefang Aowei J6 four-ear truck with 24V, PV8 and 122 mm.

Importer Photo Review for This 6K17C A/C Compressor

Photograph the compressor in the FAW Jiefang Aowei J6 four-ear truck installation before removal, then take separate bench views of the pulley, electrical lead, hose head and mounting ears. The service-parts buyer can compare the offered 6K17C assembly with the features that control installation.

Verify four right-side ears, the 122 mm clutch and rear flare outlets. The same review needs to agree with 24V, PV8 and 122 mm. A conflict at either point calls for clarification before the service-parts buyer approves a substitute.

Fleet Parts Boundaries for This 6K17C A/C Compressor

The eight-ear version uses the same 122 mm drive but a different mounting layout. Keep that distinction in the purchase record instead of depending on memory. A nearby 6K17C assembly can share the housing outline while changing the belt, voltage or hose position.

Keep the confirmed 6K17C build on its own quotation line. Clarifying the clutch or head before dispatch costs less than recovering freight, labour and downtime after a plausible-looking unit fails the installation check for FAW Jiefang Aowei J6 four-ear truck.

Importer Receiving Review for This 6K17C A/C Compressor

The warehouse can inspect this FAW Jiefang Aowei J6 four-ear truck assembly without opening the sealed ports. Confirm 24V, PV8 and 122 mm, then compare the visible head and feet with the reference image. A damaged or conflicting compressor remains outside available stock until reviewed for FAW Jiefang Aowei J6 four-ear truck with 24V, PV8 and 122 mm.

Installation planning for FAW Jiefang Aowei J6 four-ear truck still includes the rest of the A/C circuit. Debris, leakage, belt problems and poor heat rejection should be addressed before the workshop commissions this complete compressor assembly for FAW Jiefang Aowei J6 four-ear truck with 24V, PV8 and 122 mm.

Wholesale Ordering Support for the FAW Jiefang Aowei J6 four-ear truck A/C Compressor

Wholesale supply is available for FAW Jiefang Aowei J6 four-ear truck fleet projects, repeat distributor stock and consolidated orders. Elecdura keeps this 6K17C build on its own product line so a packaging request cannot hide a change in clutch, voltage or mounting.

When requesting a sample, identify the target FAW Jiefang Aowei J6 four-ear truck and the expected annual demand. the same FAW Jiefang Aowei J6 four-ear truck enquiry can state whether the buyer needs neutral packing, branded labels or consolidation with other compressor models, with 24V, PV8 and 122 mm retained on the stock record.

Distributor FAQ for the FAW Jiefang Aowei J6 four-ear truck A/C Compressor

The following points are intended for wholesale buyers comparing the old unit, the offered compressor and the commercial supply plan for FAW Jiefang Aowei J6 four-ear truck with 24V, PV8 and 122 mm.

How should a buyer describe this 6K17C compressor?

Use FAW Jiefang Aowei J6 four-ear truck, 6K17C and 24V, PV8 and 122 mm together. Add the reference image and the mounting or port detail used to accept this physical build for FAW Jiefang Aowei J6 four-ear truck.

What wrong-stock risk applies to this PV8 6K17C compressor?

The eight-ear version uses the same 122 mm drive but a different mounting layout. The distinction should remain visible from RFQ through receiving, even when both compressors share familiar castings in the FAW Jiefang Aowei J6 four-ear truck 24V, PV8 and 122 mm order.

Which photos help confirm this FAW Jiefang Aowei J6 four-ear truck compressor?

Send the clutch face, port block, connector, both mounting sides and one FAW Jiefang Aowei J6 four-ear truck installed overview. Separate angles are easier to compare than a single collage during the FAW Jiefang Aowei J6 four-ear truck 24V, PV8 and 122 mm review.

Can this FAW Jiefang Aowei J6 four-ear truck compressor use private-label packing?

That buyer can request neutral or branded packing after fitment approval. Artwork, label content and quantity are handled as commercial requirements for FAW Jiefang Aowei J6 four-ear truck with 24V, PV8 and 122 mm.

Why does port direction matter on this 6K17C compressor?

Hose routing has limited space around the FAW Jiefang Aowei J6 four-ear truck installation. the confirmed FAW Jiefang Aowei J6 four-ear truck product needs the connection side shown in the reference photographs, not merely a compatible body family; the 24V, PV8 and 122 mm specification remains the purchase reference.

What should a wholesale RFQ include for this 6K17C compressor?

List this 6K17C build separately from any neighboring variant and specify how many units are required. Add destination, timing and carton or label expectations.

Why must the PV8 122 mm clutch stay on the RFQ?

Pulley details are part of the product identity, not optional accessories for FAW Jiefang Aowei J6 four-ear truck with 24V, PV8 and 122 mm. For FAW Jiefang Aowei J6 four-ear truck, the quoted drive should reproduce the alignment evidence from the removed compressor.

Is the 6K17C family number enough to confirm fitment?

No. A 6K17C name narrows the search but does not settle the FAW Jiefang Aowei J6 four-ear truck fitment. The clutch, voltage, ports, electrical connection and feet remain part of the decision during the FAW Jiefang Aowei J6 four-ear truck 24V, PV8 and 122 mm review.

Request a Wholesale 6K17C A/C Compressor Quote

Send Elecdura the required quantity, destination and packing plan with the old-unit label and separate installation views in the FAW Jiefang Aowei J6 four-ear truck 24V, PV8 and 122 mm order. We will compare FAW Jiefang Aowei J6 four-ear truck, 24V, PV8 and 122 mm, the connector, head and mounting layout before preparing the quotation. The final offer can address product identity, volume, lead time and presentation without mixing this FAW Jiefang Aowei J6 four-ear truck assembly with a similar configuration.