S0585 Renault 55 Starter Motor Wholesale Supply

S0585 Starter Motor Wholesale Application Support for Renault 55 and 57 tractor

For Renault 55 and 57 tractor, S0585 gives distributors a focused starting point for quotation and branch inventory. Confirm 12V, 3.0kW, 10T and CW, with particular attention to 12V 3.0kW 10T catalog configuration for Renault 55 and 57 tractors, before combining demand from different fleets or workshops.

Before comparing S0585 prices, state whether the request covers an initial sample, urgent breakdown demand or routine distributor replenishment. Include the full OE reference, application, photographs, quantity and destination so the offer remains connected to the physical unit the customer expects to receive.

S0585 Starter Motor Technical Data for Fleet Parts Buyers

S0585 Renault 55 and 57 tractor 12V 3.0kW 10T starter mounting dimensions.

Use the S0585 technical drawing to check Ø89 mm locating diameter, 31 mm drive-end distance and Ø127 mm mounting-hole circle. Add the 3 mounting holes shown as 10.5, 10.5, 10.5 mm to the receiving sheet. These are practical controls for an approved sample because they can be measured before the starter is installed or released to branch stock.

After the S0585 mounting check, verify 12V, 3.0kW, 10T and CW with module 3.175. The final visual review covers the terminal studs, control connector and pinion. This prevents a physically related starter from being approved only because its reference appears in the same family.

S0585 Starter Motor Cross-Reference Review for Fleet Buyers

The S0585 cross-reference group includes S0585, 141000503000, 0001359041, 0001359068, 0001359094, 0001367071, 0986012430. Use these numbers to search supplier systems, then confirm 12V, 3.0kW, 10T, CW, mounting geometry and terminals.

For S0585, list and photograph each complete reference when pinions, drive positions or connectors differ. Elecdura can quote each physical starter independently.

S0585 Starter Motor Aftermarket Supply for Regional Distributors

Elecdura supports distributor orders from 20 pieces, normally with a 7–15 day lead time after order confirmation and an 18-month warranty under agreed sales terms. Availability, export packing and delivery timing are confirmed against the requested S0585 quantity, destination and required arrival date.

Buyers can state service urgency, supported equipment count and expected monthly use in the same RFQ. Elecdura can then discuss stock, production, packaging and staged delivery while maintaining the specified S0585 drive end and electrical rating throughout the order.

This video introduces Elecdura production and electrical testing for starter motors supplied to distributors and service networks. The commercial offer for S0585 continues to follow the stated application, electrical rating, pinion and mounting details so factory capability and product selection remain clearly connected.

S0585 Starter Motor Questions from Commercial Buyers

Which checks should follow an OE-number match for S0585 in a Renault 55 service-network sourcing program?

A number match narrows the search but does not finish it. For S0585, compare the stated application, electrical output, 10T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

Which dimensions in the S0585 drawing should receiving teams sample during a Renault 55 service-network inspection?

For S0585, check 3 mounting holes shown as 10.5, 10.5, 10.5 mm, Ø89 mm locating diameter, Ø127 mm mounting-hole circle and 31 mm drive-end distance. Count the 10T pinion and photograph the terminal side. Record these checks against the approved sample without dismantling the unit.

How should a fleet workshop verify S0585 against the removed starter during service-network sourcing?

For S0585 in Renault 55 and 57 tractor, confirm the machine or engine identity and read the full old-unit label. Check 10T, Ø127 mm mounting-hole circle, Ø89 mm locating diameter and terminal orientation. Treat a different drive end or connector position as a separate item when the stated application overlaps.

Which electrical conditions can imitate a failed S0585 starter motor during a Renault 55 service-network electrical check?

Before fitting S0585, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.

What demand information helps set a sensible reorder level for S0585 in a Renault 55 service-network program?

Build the forecast around actual equipment counts, failure history and the time needed to replenish each service location. For S0585, keep the specified pinion and mounting interface visible in the stock record. This reduces emergency substitutions and gives purchasing a clearer basis for MOQ, packing and delivery discussions.

Which physical points should be checked before S0585 enters branch stock during a Renault 55 service-network receiving check?

For S0585, match carton and product labels to the purchase order, then sample 12V, 10T, 3 mounting holes shown as 10.5, 10.5, 10.5 mm and terminal protection. Check the flange and pinion for shipping damage. Record lot numbers and arrival photographs, and isolate any different configuration before it is placed in saleable stock.

Which order conditions should be stated when asking about S0585 in a Renault 55 service-network sourcing program?

A useful RFQ states S0585, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

Which test results help investigate a returned S0585 starter in a Renault 55 service-network review?

For a service review of S0585, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

S0585 Start a Starter Motor Wholesale Enquiry

Email info@elecdurauto.com with S0585, the supported Renault 55 and 57 tractor record, old-unit photographs, quantity, destination and required arrival date. Elecdura will use those details to confirm the 12V, 3.0kW, 10T CW starter and prepare wholesale pricing with MOQ, lead time, packing and freight.