S1022 Ford Chevrolet 8.2L Starter Motor Distributor

S1022 Starter Motor Aftermarket Supply for Ford 8.2L and Chevrolet B6 8.2L

The buyer value of S1022 is a clear stock definition for Ford 8.2L and Chevrolet B6 8.2L: 12V, 4.5kW, 10T and CW. The deciding physical detail is the 8.2L truck interface with Ø16.5 mounting holes, so the application name alone is not enough to release a first order or replace an approved sample.

For the first S1022 order, include the removed-unit label, application details and straight photographs of the drive end and terminals. Quantity, destination, delivery target and any private-label requirement complete the commercial brief and reduce the risk of pricing a related but physically different starter.

S1022 Starter Motor Specification Table for B2B Sourcing

S1022 Ford Chevrolet 8.2L 12V 4.5kW 10T starter dimensions.

A warehouse can confirm the S1022 interface without dismantling the unit. Measure Ø92 locating diameter and Ø146 mounting-hole circle, inspect 3 × Ø16.5 mounting holes, then verify the 48 mm distance to drive gear. Photograph the pinion and terminal side so workshop staff can review details that a carton label cannot show.

For S1022, record 10T, CW, 12V and 4.5kW, including module 3.175. Inspect the pinion, solenoid orientation and terminal access from the same side as the removed unit. A first sample should pass both the label check and this physical comparison.

S1022 Starter Motor Reference Matching for B2B Quotations

• Use the full number: Start with S1022, 10461078, 10461103, 10461104, 10478817, 10479022, retaining prefixes, suffixes and separators in the RFQ.

• Confirm the hardware: The final match requires the stated electrical rating, drive, mounting interface and terminal side; unmatched versions should remain separate.

S1022 Starter Motor Aftermarket Supply for Regional Distributors

Distributors can combine an initial S1022 sample plan with a later replenishment forecast. MOQ is 20 pieces, normal lead time is 7–15 days after confirmation and warranty is 18 months under agreed terms; packing and shipping are quoted for the actual route and arrival requirement.

A first-lot sample is useful when the fleet carries related starters with similar housings. Retain the approved S1022 label, front view and terminal view, then use recent demand and branch transfer time to set reserve stock and delivery priorities.

This video introduces Elecdura production and electrical testing for starter motors supplied to distributors and service networks. The commercial offer for S1022 continues to follow the stated application, electrical rating, pinion and mounting details so factory capability and product selection remain clearly connected.

S1022 Starter Motor Questions from Commercial Buyers

How should a buyer request samples and bulk pricing for S1022 in a Ford Chevrolet 8.2L regional sourcing program?

Provide the full reference and application, not only a broad brand name. Attach front, side and terminal views of the removed starter and state quantity, destination, required date and packaging needs. For S1022, Elecdura will respond with the matching specification, MOQ, availability, commercial terms and freight choices.

What electrical checks help confirm that S1022 is actually required in a Ford Chevrolet 8.2L regional workshop?

Measure cranking voltage and voltage loss across the positive and negative paths, not only open-circuit battery voltage. Review the solenoid command, cable terminals, engine ground and ring gear. The results provide a useful baseline for S1022 installation and for any later service discussion with the supplier.

What fitment evidence makes a quotation for S1022 reliable during regional sourcing?

Use the complete removed-unit number and exact Ford 8.2L and Chevrolet B6 8.2L record. Compare the 10T pinion, 3 × Ø16.5 mounting holes, Ø92 locating diameter and terminal side with the old starter. A housing resemblance is insufficient when the drive position, mounting face or cable connection differs.

How should a mixed-reference enquiry for S1022 be prepared in a Ford Chevrolet 8.2L regional sourcing program?

Cross-references help purchasing teams search different brand systems, but the order should still resolve to one physical starter. Compare the candidate number with the S1022 electrical rating, pinion and drawing. Keep unmatched housings, terminal positions or drive ends on separate RFQ lines so the supplier can price them correctly.

What should be measured on the drive end before releasing S1022 to stock during a Ford Chevrolet 8.2L regional inspection?

The first-lot check should cover 3 × Ø16.5 mounting holes, Ø92 locating diameter and 48 mm distance to drive gear. Add the 10T pinion, rotation and terminal position to the inspection sheet. Recording those details helps a warehouse identify a mixed or incorrectly labelled unit before it reaches a workshop or customer.

What should an importer include in the replenishment forecast for S1022 in a Ford Chevrolet 8.2L regional program?

Build the forecast around actual equipment counts, failure history and the time needed to replenish each service location. For S1022, keep the specified pinion and mounting interface visible in the stock record. This reduces emergency substitutions and gives purchasing a clearer basis for MOQ, packing and delivery discussions.

What should a warehouse inspect when S1022 starter motors arrive during a Ford Chevrolet 8.2L regional receiving check?

For S1022, match carton and product labels to the purchase order, then sample 12V, 10T, 3 × Ø16.5 mounting holes and terminal protection. Check the flange and pinion for shipping damage. Record lot numbers and arrival photographs, and isolate any different configuration before it is placed in saleable stock.

What traceability details should accompany a warranty enquiry for S1022 in a Ford Chevrolet 8.2L regional review?

Keep the carton or product traceability code and note when and where S1022 was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete evidence allows technical support to respond without repeated requests for basic information.

S1022 Start a Starter Motor Wholesale Enquiry

To discuss S1022 supply, send the complete application and old-unit identification, mounting-face and terminal photos, requested quantity, destination and timing to info@elecdurauto.com. The reply will address the specified starter, sample or bulk availability, export packing, commercial terms and delivery route.