AZF4146 Ford Holland Tractor 12V 4.2kW Starter Motor Wholesale Supply

AZF4146 Ford Holland Tractor Starter Motor Wholesale Overview

Distributors supporting Ford Holland Tractor can source AZF4146 in the Iskra-type replacement configuration. The stated 12V, 4.2kW rating and 10T pinion are kept visible because this product keeps the stated 12V 4.2kW configuration attached to Ford Holland Tractor when purchasing teams compare old-unit photographs; they should remain on the purchase order and receiving record.

Equipment dealer teams handling scheduled stock refill should send AZF4146, the Ford Holland Tractor record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address clear lot-to-lot comparison, mixed-SKU export packing and the correct physical configuration in one useful commercial offer.

AZF4146 Starter Motor Wholesale Fitment Checks

Start the physical comparison with 10T pinion, mounting face, drive reach, solenoid position and terminal orientation. Use a straight view of the mounting face and a side view parallel to the shaft so perspective does not hide the flange-to-pinion relationship. A close body shape, paint color or solenoid size is not enough to establish interchangeability.

Confirm the machine system as 12V and retain the 4.2kW, 10T specification on the RFQ. Check that the main cable and control lead can reach their studs without tight bends or interference, especially where the starter sits close to engine or frame components.

AZF4146 Starter Motor Distributor Reorder Identification

For repeat supply, store AZF4146, Ford Holland Tractor, the received lot and the confirmed old-unit photographs together. That record allows a distributor to reorder the same configuration without rebuilding the decision from a loose list of aftermarket numbers.

For scheduled stock refill, keep AZF4146, Ford Holland Tractor, 12V, 4.2kW and 10T on one purchasing record. At goods-in, review old-unit photo linkage before releasing the lot. This gives the equipment dealer a documented basis for clear lot-to-lot comparison when the next order is raised.

AZF4146 Starter Motor Distributor Packing and Stock Planning

MOQ, packing and freight should reflect how the buyer will distribute the product. The normal minimum is 20 pieces and preparation is 7–15 days after confirmation; warranty coverage is 18 months under agreed terms, with labeling and documentation settled before shipment.

Demand from a dealer field-service team should keep AZF4146 tied to Ford Holland Tractor. For scheduled stock refill, the equipment dealer can use a machine-down contingency stock, archive the carton and lot label and review old-unit photo linkage at goods-in. This supports clear lot-to-lot comparison while keeping mixed-SKU export packing visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep AZF4146, Ford Holland Tractor and the confirmed physical configuration on the quotation.

AZF4146 Ford Holland Tractor Starter Motor FAQs

How can an equipment dealer source AZF4146 for scheduled stock refill?

Equipment dealer teams should tie AZF4146 to Ford Holland Tractor, 12V, 4.2kW, 10T and the removed-unit photographs before requesting price. For scheduled stock refill, state quantity, destination and delivery timing, then review old-unit photo linkage. Ask Elecdura to address mixed-SKU export packing and clear lot-to-lot comparison in the same quotation.

To support clear lot-to-lot comparison, what should a buyer include in the AZF4146 quotation request?

Send the complete AZF4146 reference, Ford Holland Tractor details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 4.2kW 10T unit, packing, lead time and freight in one focused offer. This supports clear lot-to-lot comparison for AZF4146.

For mixed-SKU export packing, how should 12V be confirmed for AZF4146?

Check the machine electrical system, old-starter label and service record before ordering. Keep 4.2kW, 10T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. This supports clear lot-to-lot comparison for AZF4146.

Clear lot-to-lot comparison: Is a matching 10T pinion enough to approve AZF4146?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. File AZF4146 with the old-unit photo linkage check.

Clear lot-to-lot comparison: What information helps review the AZF4146 warranty enquiry?

Provide the invoice or lot reference, installation date, Ford Holland Tractor details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Carry the AZF4146 result into mixed-SKU export packing.

Equipment dealer receiving review: What lead-time details should be stated for the AZF4146 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. File AZF4146 with the old-unit photo linkage check.

For mixed-SKU export packing, what should receiving staff inspect on the AZF4146 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Ford Holland Tractor inventory. Retain AZF4146 for clear lot-to-lot comparison and receiving review.

Mixed-SKU export packing question: Which physical details matter most when comparing AZF4146?

Compare 10T pinion, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Retain the AZF4146 result for scheduled stock refill.

Send AZF4146 Starter Motor RFQ Details to Elecdura

Email info@elecdurauto.com with AZF4146, Ford Holland Tractor details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 4.2kW 10T offer, availability, packing, lead time and freight options.