S9448S Deutz TBD226B Starter Motor Wholesale

S9448S Starter Motor B2B Fitment Guide for Deutz TBD226B and Weichai-Deutz 226B

Deutz dealers, Liugong service networks and starter importers can use S9448S as the commercial identity for the starter required in Deutz TBD226B and Weichai-Deutz 226B. The order should preserve the 10T pinion and the 12V 4.0kW 10T module-3 unit identified by S9448S and its own supplier product view, avoiding a broad substitution based only on engine family or overall housing appearance.

Send the full S9448S application and old-unit identification rather than only a truck or engine brand. With mounting and terminal photos, quantity, destination and arrival target, Elecdura can discuss the correct starter, MOQ, packing, warranty and shipping route without unnecessary follow-up.

S9448S Starter Motor Drive-End Drawing for Aftermarket Distributors

For S9448S first-lot sampling, place the old and new starters in the same front-facing position. Check 3 × Ø11.5 mm mounting holes, Ø89 mm locating diameter, Ø127 mm mounting-hole circle and 21 mm drive-end distance. Keeping those values with arrival photographs gives purchasing a reusable physical record for later replenishment.

After the S9448S mounting check, verify 12V, 4.0kW, 10T and CW with module 3. The final visual review covers the terminal studs, control connector and pinion. This prevents a physically related starter from being approved only because its reference appears in the same family.

S9448S Starter Motor OE Number Guide for Aftermarket Supply

1. Search group: S9448S, 5302289, 5449610, 12187645, 13031614, 13035760, STM3314LP can help distributor teams locate the relevant starter family.
2. Order boundary: Confirm the complete reference with 12V, 4.0kW, 10T, CW, the drawing and terminal photographs before accepting one physical unit.

S9448S Starter Motor Bulk Order Packing and Lead-Time Support

For a bulk order of S9448S, Elecdura confirms availability, packing, lead time and freight against the required quantity and destination. Standard terms begin at 20 pieces, normally require 7–15 days after confirmation and include an 18-month warranty under the final sales agreement.

For multi-branch supply, show which quantity is needed immediately and which can follow as planned replenishment. The accepted S9448S sample, dimensional record and terminal photographs can then support carton marking, receiving checks and repeat orders across the customer’s network.

B2B buyers can use the video to review Elecdura’s starter-motor assembly and test process. The approved S9448S configuration remains defined by 12V, 4.0kW, 10T, CW, mounting geometry and terminals, which should be retained in the purchase record.

S9448S Starter Motor Questions from Commercial Buyers

Which first-lot checks protect a distributor receiving S9448S during a Deutz TBD226B dealer receiving check?

For S9448S, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 3 × Ø11.5 mm mounting holes, Ø89 mm locating diameter and the specified 10T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

What workshop readings are useful when diagnosing a starting complaint involving S9448S in a Deutz TBD226B dealer workshop?

Load-test the battery set and measure voltage drop on the positive and ground circuits while cranking. Inspect cable lugs, chassis grounds, the start-control signal and ring-gear condition before replacing S9448S. These checks distinguish a starter fault from low battery capacity, resistance or a control-circuit problem.

How can an importer avoid mixing S9448S with a similar drive-end version during dealer sourcing?

For S9448S, begin with the machine, truck or engine identification, then read the full old-unit label. The physical check should cover 10T, Ø127 mm mounting-hole circle, Ø89 mm locating diameter and terminal orientation. Treat a different drive end or connector position as a separate item, even when an application description overlaps.

When does a cross-reference related to S9448S need a separate quotation in a Deutz TBD226B dealer sourcing program?

Use the complete alternate number, not a shortened series, and attach photographs of the removed unit. The S9448S group is acceptable only when 12V, 4.0kW, 10T, CW and the physical interface agree. A reference conflict should be clarified before samples or bulk quantities are released.

What physical controls belong on a first-lot check for S9448S during a Deutz TBD226B dealer inspection?

For S9448S, use a straight front view to compare the 3 × Ø11.5 mm mounting holes and Ø127 mm mounting-hole circle; use the side view for Ø89 mm locating diameter and 21 mm drive-end distance. Complete the check with 10T, CW and terminal orientation. This combination is more reliable than an angled overall photograph alone.

How should Deutz-Fahr distributors plan stock for S9448S in a Deutz TBD226B dealer program?

Retain the approved image and cross-reference set for mixed agricultural and equipment demand. Add recent usage, equipment population, transfer time and service level. Elecdura can then separate sample, emergency and replenishment quantities and plan packing or staged delivery around the buyer’s schedule.

What information should accompany a distributor RFQ for S9448S in a Deutz TBD226B dealer sourcing program?

A useful RFQ states S9448S, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

What evidence separates an electrical-system fault from a concern involving S9448S in a Deutz TBD226B dealer review?

For a service review of S9448S, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

S9448S Request a Starter Motor Fleet Supply Quote

Email info@elecdurauto.com with S9448S, the supported Deutz TBD226B and Weichai-Deutz 226B record, old-unit photographs, quantity, destination and required arrival date. Elecdura will use those details to confirm the 12V, 4.0kW, 10T CW starter and prepare wholesale pricing with MOQ, lead time, packing and freight.