UD102967S Clark Starter Motor 24V 7.8kW 10T

UD102967S Clark Starter Motor Distributor Supply and Fitment Control

For repeat wholesale supply, UD102967S should remain tied to Clark vehicles and equipment cross-referenced to UD102967S and the exact 24V, 7.8kW, 10-tooth clockwise configuration. Record the accepted old-unit label and physical sample so purchasing, receiving and warranty teams do not mix an adjacent starter variant with the approved item.

Build the approval trail for UD102967S around three items: the complete UD102967S / 428000-7120 / DSN2090 / 16020N reference group, the Clark vehicles and equipment cross-referenced to UD102967S application record and the accepted physical sample. Those controls should follow the product from quotation through receiving and warranty review. They also help a distributor separate genuine repeat demand from an inquiry for a nearby starter that shares only part of the number.

UD102967S Starter Motor B2B Production and Test Video for Fleet Replacement

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating UD102967S.

UD102967S Starter Motor Distributor Specifications for Wholesale Supply

UD102967S Starter Motor OE Cross-Reference Review for Distributor Sourcing

Use UD102967S as the primary purchasing reference and cross-check 428000-7120, DSN2090, 16020N. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

UD102967S Starter Motor Bulk Fitment Approval for Bulk Procurement

Confirm the complete UD102967S / 428000-7120 / DSN2090 / 16020N group together with the 24V, 7.8kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

UD102967S Starter Motor Wholesale Receiving Inspection for B2B Supply

For a wholesale shipment, sample units across the UD102967S lot rather than inspecting only the top carton. Compare reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

UD102967S Starter Motor MOQ and Private-Label Supply for Aftermarket Buyers

UD102967S Starter Motor Distributor FAQ for Fleet Replacement

How are MOQ, samples and repeat orders managed for UD102967S?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with UD102967S, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can UD102967S be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on UD102967S claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for UD102967S?

Use UD102967S as the control reference and measure and compare the complete group UD102967S / 428000-7120 / DSN2090 / 16020N. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Retain the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

Where is UD102967S commonly used, and what still needs confirmation?

Confirm the complete UD102967S / 428000-7120 / DSN2090 / 16020N group together with the 24V, 7.8kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on UD102967S?

Confirm the complete UD102967S / 428000-7120 / DSN2090 / 16020N group together with the 24V, 7.8kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched UD102967S order?

Confirm the complete UD102967S / 428000-7120 / DSN2090 / 16020N group together with the 24V, 7.8kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering UD102967S?

Measure and compare the equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for UD102967S?

Tie every carton and sampled unit to UD102967S, the approved cross-reference set and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

Request a B2B Quote for UD102967S Starter Motors

Send the complete reference, Clark vehicles and equipment cross-referenced to UD102967S, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.