10465405 NEW HOLLAND Dozers D150 Starter Motor 24V 10kW 10T

10465405 NEW HOLLAND Dozers D150 Starter Motor B2B Supply for Aftermarket Buyers

10465405 gives aftermarket buyers a defined 24V, 10kW, 10-tooth clockwise configuration for NEW HOLLAND Dozers D150 applications. Link the complete reference group to the buyer's machine or engine record, then approve the mounting geometry, pinion position and terminal layout before releasing distributor stock.

A reliable B2B listing for 10465405 is more than a cross-reference lookup. The sourcing file should show how 10465405 / 10479629 / 10479647 / 3282731 / 0230002370, NEW HOLLAND Dozers D150 applications, the old unit and the supplied sample were reconciled. Keep photographs and inspection results with the buyer's internal item code, then require a fresh approval if any electrical or mechanical characteristic changes on a later production lot.

10465405 Starter Motor B2B Production and Test Video for Fleet Replacement

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for 10465405.

10465405 Starter Motor Distributor Specifications for Wholesale Supply

10465405 Starter Motor OE Cross-Reference Review for Distributor Sourcing

Use 10465405 as the primary purchasing reference and cross-check 10479629, 10479647, 3282731, 0230002370. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

10465405 Starter Motor Bulk Fitment Approval for Bulk Procurement

Fitment control for 10465405 starts with the old starter and the application record. Compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation, and do not force a unit into position with the mounting bolts. If the reference family includes multiple ratings or tooth counts, create separate approval and inventory records for each physical version.

10465405 Starter Motor Wholesale Receiving Inspection for B2B Supply

Inspect incoming 10465405 lots against the signed sample and purchase-line specification. Check rating label, tooth count, mounting face, corrosion protection, terminals and lot marking, record the result by lot and quarantine any mixed version before it reaches saleable inventory. This prevents a low-cost receiving shortcut from becoming a wrong starter during planting or harvest can cost far more than the unit price in lost operating hours.

10465405 Starter Motor MOQ and Private-Label Supply for Aftermarket Buyers

10465405 Starter Motor Distributor FAQ for Fleet Replacement

What engine or equipment data is required for 10465405?

Confirm the complete 10465405 / 10479629 / 10479647 / 3282731 / 0230002370 group together with the 24V, 10kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

Why must 24V, 10kW and 10T be checked together on 10465405?

Confirm the complete 10465405 / 10479629 / 10479647 / 3282731 / 0230002370 group together with the 24V, 10kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

What must be approved before volume supply for 10465405?

Confirm the complete 10465405 / 10479629 / 10479647 / 3282731 / 0230002370 group together with the 24V, 10kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

How can a buyer prevent a bolt-up mismatch on 10465405?

Measure and compare the tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

How should a wholesale shipment of 10465405 starters be inspected?

Tie every carton and sampled unit to 10465405, the approved reference document and the supplier lot. Inspect rating label, tooth count, mounting face, corrosion protection, terminals and lot marking, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a wrong starter during planting or harvest can cost far more than the unit price in lost operating hours. This receiving discipline is cheaper than sorting returns after distribution.

When is a cross-referenced substitute acceptable for 10465405?

A substitute is acceptable only when its complete reference relationship, 24V system, 10kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the order line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Which system checks should precede a 10465405 warranty claim?

Check battery load condition, ground path, safety-start circuit, cable drop and ring-gear wear before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What information is needed for a 10465405 wholesale quotation?

Send 10465405 and all visible OE or catalog references, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Can 10465405 be sampled before a distributor order?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with 10465405, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Request a B2B Quote for 10465405 Starter Motors

Send the complete reference, NEW HOLLAND Dozers D150 applications, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.