8200589 Daewoo DH500LC Starter Motor Distributor Supply

8200589 Daewoo DH500LC Starter Motor Wholesale Procurement

Distributors supporting Daewoo DH500LC can source 8200589 in the 39MT replacement configuration. The stated 24V, 8.3kW rating and 11T pinion are kept visible because this product supports Daewoo DH500LC parts programs where an incorrect 24V 8.3kW starter can create avoidable workshop delay and return freight; they should remain on the purchase order and receiving record.

Branch inventory manager teams handling repeat-lot review should send 8200589, the Daewoo DH500LC record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address predictable export packing, consolidated freight planning and the correct physical configuration in one useful commercial offer.

8200589 Starter Motor Wholesale Mounting and Electrical Checks

Receiving and technical teams should concentrate on 11T pinion and 56mm reference, mounting face, drive reach and terminal orientation. A square drive-end image plus a side image gives a much clearer comparison of mounting, locating and pinion relationships than a general product shot, reducing the chance of releasing a visually similar but unsuitable unit.

Before ordering, the buyer should verify 24V, 8.3kW output, 11T pinion and terminal arrangement. Keeping these points together helps warehouse and sales teams avoid switching a similar-looking unit into the Daewoo DH500LC order.

8200589 Starter Motor Distributor Reorder Identification

The reference line for this product is 8200589. Do not shorten punctuation or merge it with a neighboring family in the ERP; retain Daewoo DH500LC and the core specification beside it so sales, purchasing and receiving teams are working from the same item identity.

For repeat-lot review, keep 8200589, Daewoo DH500LC, 24V, 8.3kW and 11T on one purchasing record. At goods-in, review received-lot sample retention before releasing the lot. This gives the branch inventory manager a documented basis for predictable export packing when the next order is raised.

8200589 Starter Motor Wholesale Packaging and Replenishment

The wholesale offer is built around confirmed product identity, quantity and destination. Standard orders begin at 20 pieces, preparation is normally 7–15 days, and the 18-month warranty follows the agreed sales terms; export packing and label needs are stated before production or allocation.

Demand from a heavy-equipment rebuild shop should keep 8200589 tied to Daewoo DH500LC. For repeat-lot review, the branch inventory manager can use a scheduled maintenance buffer, separate neighboring cross-references and review received-lot sample retention at goods-in. This supports predictable export packing while keeping consolidated freight planning visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 8200589, Daewoo DH500LC and the confirmed physical configuration on the quotation.

8200589 Daewoo DH500LC Starter Motor FAQs

How can a branch inventory manager source 8200589 for repeat-lot review?

Branch inventory manager teams should tie 8200589 to Daewoo DH500LC, 24V, 8.3kW, 11T and the removed-unit photographs before requesting price. For repeat-lot review, state quantity, destination and delivery timing, then review received-lot sample retention. Ask Elecdura to address consolidated freight planning and predictable export packing in the same quotation.

To support predictable export packing, when is a sample order useful for 8200589?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. This supports predictable export packing for 8200589.

During repeat-lot review, how should alternate references for 8200589 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. File 8200589 with the received-lot sample retention check.

Predictable export packing: What should receiving staff inspect on the 8200589 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Daewoo DH500LC inventory. File 8200589 with the received-lot sample retention check.

Received-lot sample retention check: Can 8200589 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Retain the 8200589 result for repeat-lot review.

During repeat-lot review, what information helps review the 8200589 warranty enquiry?

Provide the invoice or lot reference, installation date, Daewoo DH500LC details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Retain the 8200589 result for repeat-lot review.

Branch inventory manager receiving review: Which physical details matter most when comparing 8200589?

Compare 11T pinion and 56mm reference, mounting face, drive reach and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Carry the 8200589 result into consolidated freight planning.

Predictable export packing: Is a matching 11T pinion enough to approve 8200589?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 56mm reference, solenoid position, terminals and 24V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Link 8200589 photographs to the received-lot sample retention record.

Get 8200589 Daewoo DH500LC Starter Motor Pricing

Email info@elecdurauto.com with 8200589, Daewoo DH500LC details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 8.3kW 11T offer, availability, packing, lead time and freight options.