8200196 Heavy-Duty Starter Motor 12V 3.3kW 10T

8200196 Heavy-Duty Starter Motor Wholesale Supply for Distributors

For distributors and fleet-parts buyers, 8200196 identifies a 12V, 3.3kW, 10-tooth clockwise configuration for equipment identified by starter reference 8200196. Approve the complete reference, rating, drive end, mounting face, pinion and terminals against the removed unit or signed sample so a nearby version is not substituted into the purchasing line.

A reliable B2B listing for 8200196 is more than a cross-reference lookup. The sourcing file should show how 8200196 / 8200495 / STD0196NB / 2R0911023F / 6963N, equipment identified by starter reference 8200196, the old unit and the supplied sample were reconciled. Keep photographs and inspection results with the buyer's internal item code, then require a fresh approval if any electrical or mechanical characteristic changes on a later production lot.

8200196 Starter Motor B2B Production and Test Video for Wholesale Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for 8200196.

8200196 Starter Motor Distributor Specifications for Distributor Sourcing

8200196 Starter Motor OE Cross-Reference Review for Bulk Procurement

Use 8200196 as the primary purchasing reference and cross-check 8200495, STD0196NB, 2R0911023F, 6963N. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

8200196 Starter Motor Bulk Fitment Approval for B2B Supply

Fitment control for 8200196 starts with the old starter and the application record. Compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement, and do not force a unit into position with the mounting bolts. If the reference family includes multiple ratings or tooth counts, create separate approval and inventory records for each physical version.

8200196 Starter Motor Wholesale Receiving Inspection for Aftermarket Buyers

Inspect incoming 8200196 lots against the signed sample and purchase-line specification. Check reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, record the result by lot and quarantine any mixed version before it reaches saleable inventory. This prevents a low-cost receiving shortcut from becoming an unverified substitute that can stop equipment, generate a claim and turn a low unit price into a costly order.

8200196 Starter Motor MOQ and Private-Label Supply for Fleet Replacement

8200196 Starter Motor Distributor FAQ for Wholesale Supply

Why must 12V, 3.3kW and 10T be checked together on 8200196?

Confirm the complete 8200196 / 8200495 / STD0196NB / 2R0911023F / 6963N group together with the 12V, 3.3kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What must be approved before volume supply for 8200196?

Confirm the complete 8200196 / 8200495 / STD0196NB / 2R0911023F / 6963N group together with the 12V, 3.3kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

How can a buyer prevent a bolt-up mismatch on 8200196?

Compare the equipment and engine document, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Inspect bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment document is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

How should a wholesale shipment of 8200196 starters be inspected?

Tie every carton and sampled unit to 8200196, the approved reference record and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

When is a cross-referenced substitute acceptable for 8200196?

A substitute is acceptable only when its complete reference relationship, 12V system, 3.3kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Which system checks should precede a 8200196 warranty claim?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load prior to condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What information is needed for a 8200196 wholesale quotation?

Send 8200196 and all visible OE or catalog references, the full application or engine document, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Can 8200196 be sampled before a distributor order?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede batch release when fitment evidence is incomplete. Mark the approved sample with 8200196, procurement team application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

How should 8200196 packaging support aftermarket traceability?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

Request a B2B Quote for 8200196 Starter Motors

Send the complete reference, equipment identified by starter reference 8200196, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.