8200475 DH225-7/29MT Starter Motor 24V 5.5kW 11T

8200475 DH225-7/29MT Starter Motor Wholesale Supply for Distributors

For distributors and fleet-parts buyers, 8200475 identifies a 24V, 5.5kW, 11-tooth clockwise configuration for DH225-7/29MT applications. Approve the complete reference, rating, drive end, mounting face, pinion and terminals against the removed unit or signed sample so a nearby version is not substituted into the purchasing line.

Build the approval trail for 8200475 around three items: the complete 8200475 / 19080032 / 8200777 / DRS0632 / 30051600003 / 300N10080Z reference group, the DH225-7/29MT applications application record and the accepted physical sample. Those controls should follow the product from quotation through receiving and warranty review. They also help a distributor separate genuine repeat demand from an inquiry for a nearby starter that shares only part of the number.

8200475 Starter Motor B2B Production and Test Video for B2B Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for 8200475.

8200475 Starter Motor Distributor Specifications for Aftermarket Buyers

8200475 Starter Motor OE Cross-Reference Review for Fleet Replacement

Use 8200475 as the primary purchasing reference and cross-check 19080032, 8200777, DRS0632, 30051600003, 300N10080Z. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

8200475 Starter Motor Bulk Fitment Approval for Wholesale Supply

Confirm the complete 8200475 / 19080032 / 8200777 / DRS0632 / 30051600003 / 300N10080Z group together with the 24V, 5.5kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

8200475 Starter Motor Wholesale Receiving Inspection for Distributor Sourcing

For a wholesale shipment, sample units across the 8200475 lot rather than inspecting only the top carton. Compare reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

8200475 Starter Motor MOQ and Private-Label Supply for Bulk Procurement

8200475 Starter Motor Distributor FAQ for B2B Supply

What specification mismatch creates the greatest risk on 8200475?

Confirm the complete 8200475 / 19080032 / 8200777 / DRS0632 / 30051600003 / 300N10080Z group together with the 24V, 5.5kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched 8200475 order?

Confirm the complete 8200475 / 19080032 / 8200777 / DRS0632 / 30051600003 / 300N10080Z group together with the 24V, 5.5kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering 8200475?

Compare the equipment and engine document, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Inspect bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment document is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for 8200475?

Tie every carton and sampled unit to 8200475, the approved reference record and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

Can a similar 24V starter replace 8200475?

A substitute is acceptable only when its complete reference relationship, 24V system, 5.5kW rating, 11T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

How can buyers separate a 8200475 fault from an equipment fault?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load prior to condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a 8200475 RFQ technically complete?

Send 8200475 and all visible OE or catalog references, the full application or engine document, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for 8200475?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede batch release when fitment evidence is incomplete. Mark the approved sample with 8200475, procurement team application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 8200475 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

Request a B2B Quote for 8200475 Starter Motors

Send the complete reference, DH225-7/29MT applications, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.