Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
10PA17C
DCP99523
John Deere
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
Neutral packaging or customized private-label packaging
18 months
DCP99523
John Deere agricultural and heavy-equipment applications associated with DCP99523
Confirm DCP99523, 10PA17C, 24V, PV8 140 mm, direct mount, manifold and connector
| Quantity: | |
|---|---|
DCP99523 belongs in a reference-led heavy-equipment sourcing program. The 10PA17C body, 24V clutch and eight-rib 140 mm pulley create a substantially different procurement profile from smaller 12V John Deere compressor configurations.
Distributors should preserve the full DCP99523 identity on sample tags and purchase orders. A shortened “John Deere 10PA17C” description can hide both the electrical system and pulley measurement, two details that directly affect whether the unit can enter an approved fleet program.
| Product | Complete heavy-duty air conditioning compressor assembly |
|---|---|
| Application family | John Deere agricultural and heavy-equipment applications associated with DCP99523 |
| Compressor model | 10PA17C |
| Clutch voltage | 24V |
| Pulley | PV8, 140 mm |
| Refrigerant | R134a |
| Product identity | DCP99523 |
| OE / reference | DCP99523 |
| Ordering checkpoints | Product identity, model, pulley, voltage, mount, ports, connector and original-unit images |
The DCP99523 wholesale definition is 10PA17C, PV8, 140 mm, 24V and R134a. These facts should remain together on the quotation because a voltage-only or model-only request can still lead to the wrong clutch or manifold arrangement.
If another offer shows a 145 mm clutch, treat it as a different configuration rather than an automatic substitute. This product is quoted and inspected at 140 mm, with the approved image and take-off compressor used to settle the final match.
Voltage should be verified before any dimensional discussion. After confirming 24V, procurement can count eight ribs, measure the clutch, inspect the direct mount, compare manifold orientation and note the connector clocking or wire position visible on the original unit.
A reference photo alone is insufficient when multiple suppliers attach DCP99523 to adjacent configurations. The approval set should show the label, pulley edge, manifold face, mounting width and rear head so an inspector can identify what the buyer actually accepted.
During inbound inspection, connect the delivery paperwork to the approved DCP99523 sample. Check that the pulley is PV8 and 140 mm, confirm the 24V electrical marking, review ports and caps, and look for shipping damage around the clutch and ears.
Keep DCP99523 in a dedicated location away from 12V 10PA17C stock. Warehouse systems should expose voltage and pulley data in the pick description because a cast family name is not enough to stop a rushed cross-pick.
Customers may ask for this compressor across John Deere loaders, dozers and other machines. Final fitment still depends on comparing the reference, voltage, clutch and physical interfaces for the specific equipment.
Where a customer provides AT-series or other cross references, sourcing staff should keep them on the enquiry record. Add them to the approved interchange only after the 24V, PV8 140 mm and manifold layout match the offered unit.
A DCP99523 RFQ should contain machine type, model and serial information, the removed compressor references, photographs, annual demand, destination and preferred packaging. Mixed 12V and 24V fleets should be separated into distinct lines before price comparison.
Once a sample is approved, Elecdura can discuss bulk quantities, inspection reports, private labels and repeat release schedules. The commercial offer remains tied to the DCP99523 10PA17C 24V PV8 140 mm definition throughout the supply cycle.
The following purchasing questions address the configuration, evidence and commercial controls most likely to affect a DCP99523 wholesale order.
Use 10PA17C, 24V, PV8 140 mm, R134a, the John Deere application and the exact approved product images together; no single attribute is sufficient.
No. For DCP99523, a shared compressor family does not establish the same clutch, voltage, mount, head, ports, connector or hose direction for the intended John Deere machine.
The offered DCP99523 configuration uses PV8 and 140 mm. For DCP99523, both the belt profile and measured diameter should be checked against the removed complete assembly.
This DCP99523 configuration uses 24V. DCP99523 approval requires the machine system, connector shape, terminal arrangement and visible coil position to be confirmed.
A DCP99523 RFQ should provide the machine model and serial information when available, original references, label and interface images, quantity, destination, delivery target and packaging request.
Compare the delivered unit with the approved image set, then inspect the PV8 140 mm clutch, 24V connection, mounting ears, head, ports, caps and carton identity.
Yes. Neutral packaging, private-label presentation and batch inspection can be discussed after the exact DCP99523 sample and purchase specification are accepted.
No. For DCP99523, qualified workshops must follow the relevant machine and A/C system procedure for refrigerant recovery, flushing, oil balance, evacuation, charging and installation.
Send the John Deere application, removed-compressor references and images, requested volume, destination and packaging needs. Elecdura will review the 10PA17C 24V PV8 140 mm complete A/C compressor configuration before issuing a quotation.
