0001360015 Iveco 79-13 Starter Motor Wholesale 24V

0001360015 Starter Motor Wholesale Support for Iveco 79-13

Parts counters supporting older Iveco 79-13 trucks need a searchable reference and a clear physical definition. 0001360015 provides the OE anchor, while vehicle details keep the order tied to the correct installation.

Legacy references are frequently grouped across different equipment. A nine-tooth drive, three-hole flange and reachable cable studs should be confirmed before a visually similar Bosch-style starter is accepted.

0001360015 Starter Motor Dimensions for Legacy Truck Procurement

This Elecdura product is defined as 24V, 4.5kW, 9T, module 3 and clockwise rotation. The combined rating helps purchasing and workshop teams discuss one consistent replacement configuration.

0001360015 Starter Motor Dimensions for Iveco 79-13 Buyers — compare the drawing with the removed starter before placing a volume order.

The mounting drawing shows three Ø12 holes on an Ø146 circle, an Ø110 locating reference and a 27 mm axial position. Photograph the old flange squarely so these values can be compared.

0001360015 Starter Motor Cross-Reference Checks for Iveco Buyers

The main number group includes 0001360015, 0001360043, 0001368019, 4172004, 4187587, AZJ3133 and AZJ3546. Cross-reference agreement should support, not replace, the Iveco vehicle and physical checks.

Slow-moving legacy stock remains easier to identify when the shelf description includes Iveco 79-13, 9T and the accepted flange image. This reduces guesswork during occasional urgent enquiries.

0001360015 Starter Motor Stock Support and Production Video

Before replacement, workshops should test the 24V battery bank, high-current cable drop and start signal. Recording those values helps distributors separate an electrical-system fault from a starter-related return.

Elecdura's starter-motor video presents assembly and electrical testing for wholesale programs. It supports supplier assessment while the 0001360015 order continues to depend on the truck identity, mounting face and terminals.

0001360015 Starter Motor FAQs for B2B Buyers

How should an Iveco 79-13 5.5 vehicle be identified for this starter?

The buyer should provide 79-13 5.5 model, chassis or engine details and complete old-unit label. For 0001360015, those details must agree with the Iveco model, 9T drive, Ø146 three-hole face and cable studs rather than a broad brand description. This keeps a legacy truck request tied to the actual vehicle. Retain the 0001360015 comparison photographs with the delivery lot for after-sales review.

Which flange features separate 0001360015 from nearby Bosch-style starters?

Measure 3 × Ø12 holes, Ø146 mounting circle, Ø110 locating reference and 27 mm axial reference on the removed starter or a trusted sample. For 0001360015, keep square front and side photographs showing the Iveco model, 9T drive, Ø146 three-hole face and cable studs. This prevents a similar-looking housing from being quoted only by voltage and brand. Include the confirmed 0001360015 configuration in later forecasts and repeat purchases.

What must the workshop confirm in the Iveco 24V starting circuit?

A useful no-crank report records 24V system, battery-bank condition, cable voltage drop and start signal. Relating that evidence to the 0001360015 installation in Iveco 79-13 5.5 commercial vehicles gives after-sales staff more than a short failure description. This verifies system compatibility and avoids blaming the replacement for a circuit fault. Keep the verified truck identity and flange photographs with the legacy stock record.

Which number group can support a 0001360015 cross-reference search?

Use 0001360015, 0001360043, 0001368019, 4172004, 4187587, AZJ3133 and AZJ3546 as a search set, then keep Iveco 79-13 5.5 commercial vehicles on the same enquiry. Confirm the Iveco model, 9T drive, Ø146 three-hole face and cable studs on the removed unit before treating the numbers as one 0001360015 product. This gives procurement teams a defined search set without widening the application claim.

Why should cable-stud position be photographed on an older Iveco truck?

The buyer should provide legacy vehicle wiring reach and the starter's terminal-side arrangement. For 0001360015, those details must agree with the Iveco model, 9T drive, Ø146 three-hole face and cable studs rather than a broad brand description. This identifies installation constraints that a reference list cannot show. Keep the matched 0001360015 images with branch stock details for future replenishment.

What does the 9T module-3 drive tell the parts counter?

Verify 9 teeth, module 3 and CW on the removed unit. For 0001360015, pair the drive data with the 24V system and measured mounting face so a same-output starter is not assumed suitable. This separates the drive from another 24V Iveco starter with a different pinion. Use the confirmed 0001360015 combination on the purchase order and receiving sheet.

How can distributors keep a slow-moving 79-13 line traceable?

Use OE reference, vehicle model, nine-tooth identity and accepted comparison photos when deciding 0001360015 reserve quantities and warehouse labels. A description that includes the Iveco model, 9T drive, Ø146 three-hole face and cable studs makes repeat picking faster and clearer. This supports accurate picking even when demand is infrequent. Preserve the Iveco 79-13 5.5 commercial vehicles fitment and mounting comparison in the customer's reorder notes.

What belongs in a 0001360015 wholesale quotation request?

Send vehicle details, old-unit number and photos, quantity, packing, required date and destination in one enquiry. Elecdura can then check the Iveco model, 9T drive, Ø146 three-hole face and cable studs and quote quantity, packing and lead time against the actual destination. This provides both fitment and commercial inputs for a useful response. Carry the agreed 0001360015 identity through packing and branch-transfer documents.

Request 0001360015 Starter Motor Wholesale Pricing for Iveco

Email the Iveco model and chassis details, every readable starter number, nine-tooth pinion and flange photographs, quantity, packing requirement, delivery date and destination to info@elecdurauto.com. Elecdura will review the 0001360015 match and quote the required supply.