0001 223 506 SAME Tractor 12V 2.6kW Starter Motor B2B Supply

0001 223 506 SAME Tractor Starter Motor B2B Purchasing Overview

0001 223 506 for SAME Tractor is presented for wholesale enquiries with the listed 12V, 2.6kW and 11T specification. That precise identity gives commercial buyers a practical starting point for checking fit, availability, packing and delivery without relying on a broad starter-family description.

Equipment dealer teams handling consolidated shipment should send 0001 223 506, the SAME Tractor record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address faster quotation review, destination-specific packing and the correct physical configuration in one useful commercial offer.

0001 223 506 Starter Motor Data for Distributor Review

The key fit controls are 11T pinion, mounting face, drive reach, solenoid position and terminal orientation. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.

Electrical identity and mechanical fit must agree. Verify 12V, the 2.6kW rating and terminal layout, then count the 11 pinion teeth. A correct flange with the wrong system voltage, output or cable position is not an acceptable substitute.

0001 223 506 Starter Motor OE Reference Control for B2B Orders

Use 0001 223 506 as the primary searchable order identity. If the label or service record shows an alternate reference, list its complete format and source on a separate RFQ line until voltage, output, drive and mounting have all been compared.

For consolidated shipment, keep 0001 223 506, SAME Tractor, 12V, 2.6kW and 11T on one purchasing record. At goods-in, review carton and item segregation before releasing the lot. This gives the equipment dealer a documented basis for faster quotation review when the next order is raised.

0001 223 506 Starter Motor Wholesale Terms and Supply Support

Elecdura works with importers, parts distributors, rebuilders and fleet-service businesses. A typical order starts at 20 pieces and takes 7–15 days after confirmation, with neutral packaging, private-label review and an 18-month warranty available under the final commercial agreement.

Demand from a regional machinery warehouse should keep 0001 223 506 tied to SAME Tractor. For consolidated shipment, the equipment dealer can use a sample-controlled new line, link the machine plate to the item and review carton and item segregation at goods-in. This supports faster quotation review while keeping destination-specific packing visible.

This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the 0001 223 506 order should still be based on the listed application, electrical data and physical unit checks.

0001 223 506 SAME Tractor Starter Motor FAQs

How can an equipment dealer source 0001 223 506 for consolidated shipment?

Equipment dealer teams should tie 0001 223 506 to SAME Tractor, 12V, 2.6kW, 11T and the removed-unit photographs before requesting price. For consolidated shipment, state quantity, destination and delivery timing, then review carton and item segregation. Ask Elecdura to address destination-specific packing and faster quotation review in the same quotation.

For destination-specific packing, how should alternate references for 0001 223 506 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. This supports faster quotation review for 0001 223 506.

During consolidated shipment, what information helps review the 0001 223 506 warranty enquiry?

Provide the invoice or lot reference, installation date, SAME Tractor details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Keep 0001 223 506 traceable through consolidated shipment.

During consolidated shipment, what should a buyer include in the 0001 223 506 quotation request?

Send the complete 0001 223 506 reference, SAME Tractor details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 2.6kW 11T unit, packing, lead time and freight in one focused offer. Link 0001 223 506 photographs to the carton and item segregation record.

Faster quotation review: Is a matching 11T pinion enough to approve 0001 223 506?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Carry the 0001 223 506 result into destination-specific packing.

During consolidated shipment, what should receiving staff inspect on the 0001 223 506 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal SAME Tractor inventory. Retain 0001 223 506 for faster quotation review and receiving review.

For destination-specific packing, what can cause slow cranking besides a fault in 0001 223 506?

Low battery capacity, excessive voltage drop, corroded lugs, weak grounds, undersized cables and mechanical engine drag can all reduce cranking speed. Record loaded battery voltage and cable-drop readings before replacement. This protects the buyer from changing a starter while the original circuit problem remains. Retain the 0001 223 506 result for consolidated shipment.

Destination-specific packing question: How should 12V be confirmed for 0001 223 506?

Check the machine electrical system, old-starter label and service record before ordering. Keep 2.6kW, 11T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. File 0001 223 506 with the carton and item segregation check.

Send 0001 223 506 Starter Motor RFQ Details to Elecdura

Email info@elecdurauto.com with 0001 223 506, SAME Tractor details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.6kW 11T offer, availability, packing, lead time and freight options.