Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
10K17C
Foton
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
10K17C 24V A1 135 mm configuration
Foton Auman truck
Foton Auman truck; confirm 10K17C, 24V, A1 135 mm, connector, ports and mounting; confirm the rear-facing flare ports, single A groove and mounting width
| Quantity: | |
|---|---|
For Foton Auman truck service stock, the application name is useful only when it stays attached to the clutch and electrical details. The offered 10K17C compressor is a complete assembly for Auman fleet repair with older V-belt and rear-hose routing, with single-A 135 mm 24V rear-flare 10K17C configuration. Keeping 24V, A1 and 135 mm with the head and mounting layout helps the regional wholesaler separate it from nearby variants.
For Foton Auman truck, a recognizable housing does not settle the order. Elecdura therefore quotes the 24V, A1 and 135 mm assembly with an image-based check of the head, connector and feet, which is especially useful for regional replenishment.
| Application | Foton Auman truck |
|---|---|
| Compressor model | 10K17C |
| Pulley / clutch | A1 and 135 mm |
| Clutch voltage | 24V |
| Supply form | Complete aftermarket A/C compressor assembly |
| Supplied configuration | single-A 135 mm 24V rear-flare 10K17C configuration |
The specification block covers this complete compressor rather than the wider A/C circuit for Foton Auman truck with 24V, A1 and 135 mm. For regional replenishment, the workshop should take any oil balance, refrigerant charge and commissioning values from the approved service information for Foton Auman truck.
When the plate is incomplete, the removed compressor becomes the strongest physical reference for Foton Auman truck. Clear views of the clutch, head, connector and feet preserve the details needed to distinguish this 10K17C build after it leaves the workshop.
Ask the supplier to confirm the rear-facing flare ports, single A groove and mounting width. Combined with 24V, A1 and 135 mm, that check can expose an incorrect port direction, pulley or foot pattern before the compressor enters a wholesale shipment.
Do not merge this rear-port product with the GTL left-15-degree head variants. Keep that distinction in the Foton Auman truck order line instead of depending on memory; this order is for the 24V, A1 and 135 mm version. A nearby 10K17C assembly for Foton Auman truck can share the housing outline while changing the belt, voltage or hose position, with 24V, A1 and 135 mm retained on the stock record.
The warehouse should be able to identify this Foton Auman truck compressor without opening a service manual or relying on the casting alone. A full stock description and the reference image provide that control during the Foton Auman truck 24V, A1 and 135 mm review.
Receiving should use the same Foton Auman truck evidence that purchasing approved. That means the product image, the 10K17C identification and 24V, A1 and 135 mm, followed by a visual check for impact damage or missing protective caps.
The old-unit failure provides useful service evidence. Before fitting the 24V, A1 and 135 mm replacement to Foton Auman truck, inspect the belt path, hoses, airflow and circuit condition and correct the fault that could damage the new compressor.
Wholesale supply is available for Foton Auman truck fleet projects, repeat distributor stock and consolidated orders. Elecdura keeps this 10K17C build on its own product line so a packaging request cannot hide a change in clutch, voltage or mounting.
A complete enquiry states quantity, destination, target delivery window and packaging plan in the Foton Auman truck 24V, A1 and 135 mm order. Add Foton Auman truck, 24V, A1 and 135 mm and the reference photos, especially the views needed to confirm the rear-facing flare ports, single A groove and mounting width.
Before quantity is committed, these answers help the buyer connect 24V, A1 and 135 mm with fitment evidence and ordering requirements during the Foton Auman truck 24V, A1 and 135 mm review.
Qualified programs may use buyer-brand labels or agreed cartons for Foton Auman truck with 24V, A1 and 135 mm. The Foton Auman truck product record remains fixed so packaging cannot blur a variant difference.
Do not merge this rear-port product with the GTL left-15-degree head variants. Recording that boundary helps the regional wholesaler avoid installation delays during repeat supply.
Compare the Foton Auman truck electrical circuit with the connector or label evidence on the removed unit. Keep 24V tied to the rest of the confirmed compressor configuration for Foton Auman truck.
Match the delivered 10K17C compressor with the reference image and order line. Check the clutch and exposed mounting points for transit contact before binning during the Foton Auman truck 24V, A1 and 135 mm review.
List this 10K17C build separately from any neighboring variant and specify how many units are required. Add destination, timing and carton or label expectations.
The working identity combines the Foton Auman truck application with 10K17C, 24V, A1 and 135 mm and the confirmed compressor view. On the Foton Auman truck 24V, A1 and 135 mm order, none of those elements should be dropped from the first-order review.
Use uncropped angle shots rather than a collage: clutch, ports, connector, front mount, rear mount and installed position for Foton Auman truck. Keep them with the order line for repeat purchasing.
Give each physical build its own line, image and quantity. This keeps the Foton Auman truck compressor separate through quotation, picking and packing.
Importers and fleet buyers can submit an RFQ for this 10K17C assembly with expected demand, delivery location and packing needs. Include the confirmed Foton Auman truck reference views to keep the physical build clear. A clear first enquiry also gives both parties a dependable reference if the Foton Auman truck compressor moves from sample evaluation into regular supply.
