10K17C 24V PV6 135 mm left-15-degree flare Heavy-Duty A/C Compressor for Foton Auman GTL truck

Importer Guide to This 10K17C A/C Compressor

A distributor supporting Foton Auman GTL truck fleets needs the complete drive and mounting description before the unit reaches the workshop; the 24V, PV6 and 135 mm specification remains the purchase reference. The complete aftermarket 10K17C assembly is built around narrow eight-ear PV6 135 mm 24V left-15-degree flare configuration. Its 24V, PV6 and 135 mm drive and visible mounting layout stay together as one orderable configuration for GTL distributor supply for workshops that need a recognizable six-rib build.

For Foton Auman GTL truck, a recognizable housing does not settle the order. Elecdura therefore quotes the 24V, PV6 and 135 mm assembly with an image-based check of the head, connector and feet, which is especially useful for project supply.

Importer Specification Sheet for This 10K17C A/C Compressor

The specification block covers this complete compressor rather than the wider A/C circuit for Foton Auman GTL truck with 24V, PV6 and 135 mm. For project supply, the workshop should take any oil balance, refrigerant charge and commissioning values from the approved service information for Foton Auman GTL truck.

Distributor Fitment Check for the Foton Auman GTL truck A/C Compressor

If several 10K17C versions are present in the same fleet, mark the old compressor before it reaches the bench for Foton Auman GTL truck with 24V, PV6 and 135 mm. Photograph its installed position on Foton Auman GTL truck and keep the resulting angle shots with the specific order line.

For this assembly, the buyer needs to verify six ribs, the narrow eight-ear mount and left-angled flare outlets. That visual result carries more weight than a general model-family match when a nearby build uses a different clutch or hose layout during the Foton Auman GTL truck 24V, PV6 and 135 mm review.

Wholesale Variant Control for the Foton Auman GTL truck A/C Compressor

A single-A GTL or straight rear-port Auman compressor must stay on a separate stock line. Keep that distinction in the Foton Auman GTL truck order line instead of depending on memory; the 24V, PV6 and 135 mm specification remains the purchase reference. A nearby 10K17C assembly for Foton Auman GTL truck can share the housing outline while changing the belt, voltage or hose position; this order is for the 24V, PV6 and 135 mm version.

If a distributor stocks both Foton Auman GTL truck versions, use different item codes and bin references, with 24V, PV6 and 135 mm retained on the stock record. The separation makes the Foton Auman GTL truck configuration visible during quotation, receiving, picking and warranty review.

Fleet Handling Checks for the Foton Auman GTL truck A/C Compressor

The warehouse can inspect this Foton Auman GTL truck assembly without opening the sealed ports. Confirm 24V, PV6 and 135 mm, then compare the visible head and feet with the reference image. A damaged or conflicting compressor remains outside available stock until reviewed for Foton Auman GTL truck with 24V, PV6 and 135 mm.

A fleet replacement is ready to install only after the surrounding circuit is ready for Foton Auman GTL truck with 24V, PV6 and 135 mm. For Foton Auman GTL truck, inspect the belt, hoses, condenser airflow and contamination risk before putting the new 10K17C compressor into service.

Distributor RFQ Details for This 10K17C A/C Compressor

Elecdura supports wholesale enquiries for this 24V, PV6 and 135 mm compressor, from initial evaluation to planned project supply. Neutral or private-label presentation is available for suitable programs once the Foton Auman GTL truck fitment has been approved.

The shortest route to an accurate quote is a complete line: Foton Auman GTL truck, 10K17C, 24V, PV6 and 135 mm, quantity and destination. Attach clutch, head, connector and mounting views for the supplier's comparison for Foton Auman GTL truck.

Importer FAQ for This 10K17C A/C Compressor

Use this FAQ when preparing an RFQ or reviewing the physical 24V, PV6 and 135 mm compressor for distributor stock.

Why does port direction matter on this 10K17C compressor?

Hose routing has limited space around the Foton Auman GTL truck installation. the confirmed Foton Auman GTL truck product needs the connection side shown in the reference photographs, not merely a compatible body family, with 24V, PV6 and 135 mm retained on the stock record.

Can this Foton Auman GTL truck compressor use private-label packing?

Private-label presentation is available for suitable wholesale orders. It changes packaging and marking, not the confirmed 24V, PV6 and 135 mm compressor build.

Is the 10K17C family number enough to confirm fitment?

No. For Foton Auman GTL truck, the family number still needs to agree with 24V, PV6 and 135 mm, the connector, head and mounting layout. Related housings may belong to different complete assemblies.

Why must the PV6 135 mm clutch stay on the RFQ?

Keeping the clutch on the RFQ lets the supplier compare the actual drive rather than only the 10K17C family. It also gives receiving a measurable feature to check.

What identifies this Foton Auman GTL truck A/C compressor?

The working identity combines the Foton Auman GTL truck application with 10K17C, 24V, PV6 and 135 mm and the confirmed compressor view. On the Foton Auman GTL truck 24V, PV6 and 135 mm order, none of those elements should be dropped from the first-order review.

Which photos help confirm this Foton Auman GTL truck compressor?

Provide individual views of the pulley, hose head, electrical lead and mounting feet, plus the compressor installed on Foton Auman GTL truck. The supplier can then compare one feature at a time during the Foton Auman GTL truck 24V, PV6 and 135 mm review.

What should a wholesale RFQ include for this 10K17C compressor?

List this 10K17C build separately from any neighboring variant and specify how many units are required. Add destination, timing and carton or label expectations.

What wrong-stock risk applies to this PV6 10K17C compressor?

A single-A GTL or straight rear-port Auman compressor must stay on a separate stock line. Recording that boundary helps the fleet parts team avoid wrong-stock returns during repeat supply.

Request a Wholesale 10K17C A/C Compressor Quote

Ask Elecdura for bulk pricing with a complete order line: Foton Auman GTL truck, 10K17C, 24V, PV6 and 135 mm, volume, destination and required packaging. Clutch, port and mounting images will support the product comparison during the Foton Auman GTL truck 24V, PV6 and 135 mm review. A clear first enquiry also gives both parties a dependable reference if the Foton Auman GTL truck compressor moves from sample evaluation into regular supply.