10S11A 12V A1 115mm Heavy-Duty A/C Compressor for Lovol Huwei

Lovol Huwei equipment Heavy-Duty A/C Compressor: A Buyer-Led Overview

This 10S11A unit is offered as a complete A/C compressor assembly for Lovol Huwei equipment, not as a loose clutch, pulley or repair component. The 12V electrical system and A1 115mm drive describe the version being quoted. This centered Huwei version is not the same as the four-ear Foton light-truck assembly with similar 115 mm dimensions.

A/C Compressor Fitment Confirmation for Workshops and Fleet Accounts

The old unit should remain on the bench until the buyer has completed one physical comparison: check the centered single-A clutch and 115 mm diameter with the old unit. This is especially important for fleets that source the same 10S11A body across several vehicle makes. Where no readable OE reference is available on the removed unit, buyers should lead with 10S11A, 12V, A1 115mm, the application and clear photos of the unit removed from service.

The refrigerant is not stated in the available product information. Do not infer it from another 10S11A version; confirm the vehicle or equipment A/C system before charging. Keep the ports capped until the workshop is ready, protect the clutch from impact and do not carry the assembly by its wire. Good receiving and handling practice preserves the configuration that the overseas importer ordered.

Private-Label A/C Compressor Cooperation for commercial and construction vehicle

For bulk orders, buyers can request neutral cartons or a customer-brand presentation after the compressor identity is locked. The usual planning range is 50–100 pieces, with a 7–15 day expected dispatch window and an 18-month warranty. Mixed configurations should be listed as separate RFQ lines rather than combined under one model name.

Configuration Details for Wholesale A/C Compressor Review

Separating This Compressor in Distributor Inventory

Importers should keep this compressor in its own SKU lane with the voltage and pulley printed beside the application. Similar 10S11A castings may share external dimensions while using a different clutch, connector, port direction or bracket. A separate image and configuration line reduces picking errors during repeat orders.

When a fleet requests a replacement for Lovol Huwei equipment, center-position single-A 115 mm 12V build provides the first practical filter for the sourcing conversation. The receiving checklist therefore needs one direct instruction: check the centered single-A clutch and 115 mm diameter with the old unit. This configuration record supports a defensible buying decision and stops 10S11A, 12V and A1 115mm from being detached from the actual compressor geometry. This centered Huwei version is not the same as the four-ear Foton light-truck assembly with similar 115 mm dimensions.

For this Lovol Huwei equipment line, the buying conversation should stay anchored to center-position single-A 115 mm 12V build. That focus is useful at three stages: sales can quote the intended build, warehouse staff can receive the correct carton, and the workshop can compare the old compressor without interpreting an ambiguous family name. This centered Huwei version is not the same as the four-ear Foton light-truck assembly with similar 115 mm dimensions. A parts distributor that records these distinctions once can handle repeat orders faster while protecting the fleet customer from avoidable fitment delays.

Quotation Preparation for the 10S11A A/C Compressor

A useful RFQ includes the vehicle or equipment model, engine when known, voltage, pulley groove count, clutch diameter, clear front/rear/side photos and any readable OE reference. Add the required quantity, destination port, packaging preference and delivery window. This gives the price submission team enough information to compare the request with the exact compressor.

Wholesale Questions about the Lovol Huwei equipment Heavy-Duty A/C Compressor

Which original-unit details should a fleet buyer send for this A/C compressor?

Anchor the initial review to this distinguishing feature: center-position single-A 115 mm 12V build. Then check the centered single-A clutch and 115 mm diameter with the old unit. The 10S11A casting alone does not close the fitment question, because this version combines 12V, A1 115mm and a particular physical layout for Lovol Huwei equipment. Include those observations and the forecast order size in the inquiry so the response addresses this complete unit.

Why can two 10S11A heavy-duty A/C compressors look similar but not fit?

Do not approve an adjacent version simply because its compressor is part of the 10S11A family. This centered Huwei version is not the same as the four-ear Foton light-truck assembly with similar 115 mm dimensions. The parts-purchasing desk needs agreement on the clutch voltage, clutch drive, refrigerant-line interface and bracket pattern. One changed checkpoint is enough to create a different stock line that deserves its own photograph, carton mark and quoted line.

How should an importer confirm the refrigerant and oil requirement for this A/C compressor?

The required electrical and drive details are 12V and A1 115mm. Compare the clutch rating with the vehicle supply, inspect any old clutch marking and measure the pulley from consistent points rather than estimating from a photograph. Check the centered single-A clutch and 115 mm diameter with the old unit. The right compressor case with a mismatched clutch or belt route still creates a non-fitting replacement and preventable workshop delay.

Is neutral packaging available for wholesale A/C compressor orders?

Own-brand packing can be quoted once center-position single-A 115 mm 12V build and the rest of the assembly identity have been approved. Elecdura's normal procurement baseline is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. Provide branding artwork, barcode format and box requirements, inspection expectations and destination early enough for them to appear in the quotation sheet.

What quantity and lead-time details belong in a distributor RFQ for this A/C compressor?

Build the RFQ around one isolated SKU definition: 10S11A for Lovol Huwei equipment, with 12V, A1 115mm and center-position single-A 115 mm 12V build. Add the volume, destination, trade term, carton style, buyer SKU, barcode and documentation request. If an alternative changes any electrical, drive, port or mount detail, place it on another inquiry row so price and packing records remain auditable.

How does Elecdura check the image against the compressor configuration?

Take a straight-on photograph of the pulley so its groove form can be counted, then capture the connector, port block and every fixing point from useful side and rear angles. For this Lovol Huwei equipment request, give special attention to center-position single-A 115 mm 12V build. The photo group lets the supplier examine the physical arrangement instead of extrapolating from a broad vehicle description.