Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
10S11A
Foton / Lovol
IATF 16949, ISO 9001, and other major OEM certification systems
OEM label and ODM customization accepted
50 - 100 pcs
7–15 Days
18 months
10S11A 12V PV8 110mm configuration
Lovol Huwei equipment
Lovol Huwei equipment; confirm 10S11A, 12V, PV8 110mm, connector, ports and mounting against the original unit
| Quantity: | |
|---|---|
Fleet service teams usually begin with an equipment name, but importers need a tighter record. Here, the practical ordering identity is Lovol Huwei equipment, 10S11A, 12V and PV8 110mm. Wire-clip position separates this 12V compressor from the left-clip 24V unit even where pulley size is identical.
Distributors, importers and fleet supply programs may request OEM/ODM cooperation, private labeling and non-branded packing. Wholesale planning baseline normally starts at 50–100 pieces, with a 7–15 day expected dispatch window and an 18-month warranty. A final commercial proposal follows the confirmed configuration and destination requirements.
A buyer can reduce mismatch exposure by using one minimum photo and measurement task: verify the wire clip sits on the right when viewed from the same orientation as the product image. Where no readable OE reference is available on the removed unit, buyers should lead with 10S11A, 12V, PV8 110mm, the application and clear photos of the in-service compressor.
The refrigerant is not stated in the available product information. Do not infer it from another 10S11A version; confirm the vehicle or equipment A/C system before charging. The service team should investigate why the previous compressor failed and correct contamination, restriction or oil-balance issues before workshop fitting. A correct part number cannot compensate for an A/C circuit that remains dirty or mechanically restricted.
This product should be stored as a complete assembly and counted separately from clutches, coils, pulleys and repair parts. The item image, application line and PV8 110 mm 12V right-side wire-clip build description should stay together through buyer quote, packing and receiving.
The central procurement fact on this Lovol Huwei equipment line is PV8 110 mm 12V right-side wire-clip build, a distinction that belongs in both the buyer SKU and the supplier supply quotation. A reliable sample review requires the buyer to verify the wire clip sits on the right when viewed from the same orientation as the product image. The approved record then serves sales and operations alike: it connects 10S11A, 12V and PV8 110mm with the right physical unit. Wire-clip position separates this 12V compressor from the left-clip 24V unit even where pulley size is identical.
For wholesalers, PV8 110 mm 12V right-side wire-clip build is more than a technical phrase; it is the boundary of this stock item. Wire-clip position separates this 12V compressor from the left-clip 24V unit even where pulley size is identical. The same description should appear in the inquiry response, buyer confirmation and warehouse note. When those three documents use the same identity, the risk of packing a neighboring 10S11A version drops and branded-program artwork can be prepared against the correct assembly.
| Compressor model | 10S11A |
| Application | Lovol Huwei equipment |
| Voltage | 12V |
| Pulley / clutch | PV8 110mm |
| Refrigerant | Confirm the vehicle A/C system refrigerant before charging |
| Lubricant reference | Confirm the oil grade and system balance before commissioning |
| Fitment focus | verify the wire clip sits on the right when viewed from the same orientation as the product image |
For buyer quote, attach the application, 10S11A, 12V, PV8 110mm, photos from several angles and the expected required volume. Importers should also state whether they need neutral cartons, buyer branding, barcode labels or inspection documents. This prevents commercial details from being discussed against the wrong compressor.
First establish the feature that controls this stock record: PV8 110 mm 12V right-side wire-clip build. Then verify the wire clip sits on the right when viewed from the same orientation as the product image. The 10S11A casting alone does not close the fitment question, because this version combines 12V, PV8 110mm and a particular physical layout for Lovol Huwei equipment. Include those observations and the intended bulk quantity in the inquiry so the response addresses this complete unit.
A nearby configuration is not an automatic substitute simply because its unit appears within the 10S11A family. Wire-clip position separates this 12V compressor from the left-clip 24V unit even where pulley size is identical. The parts-purchasing desk needs agreement on the rated voltage, clutch drive, port connection and mount layout. A single differing detail requires a distinct stock identity that deserves its own photograph, carton mark and quoted line.
Take a straight-on photograph of the pulley so its groove form can be counted, then capture the connector, port block and every fixing point from useful side and rear angles. For this Lovol Huwei equipment request, give special attention to PV8 110 mm 12V right-side wire-clip build. The resulting views let engineering assess the real geometry instead of extrapolating from a broad vehicle description.
Own-brand packing can be quoted once PV8 110 mm 12V right-side wire-clip build and the rest of the assembly identity have been approved. Elecdura's normal program planning range is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. List the artwork, barcode and carton needs, inspection expectations and destination early enough for them to appear in the supply offer.
The specified unit uses 12V and PV8 110mm. Verify vehicle voltage at the machine, inspect any old clutch marking and measure the pulley from consistent points rather than estimating from a photograph. Verify the wire clip sits on the right when viewed from the same orientation as the product image. A familiar body combined with the wrong voltage or pulley still creates a non-fitting replacement and preventable workshop delay.
Custom-label packing can be evaluated once PV8 110 mm 12V right-side wire-clip build and the rest of the assembly identity have been approved. Elecdura's normal procurement baseline is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. Send the label artwork, barcode structure and carton specification, inspection expectations and destination early enough for them to appear in the quotation sheet.
