20660222 10S11A Heavy-Duty A/C Compressor for Lovol

Procurement Priorities for the Lovol compact excavator Heavy-Duty A/C Compressor

Fleet service teams usually begin with an equipment name, but importers need a tighter record. Here, the practical ordering identity is Lovol compact excavator, 10S11A, 12V and A1 132mm. The larger 132 mm pulley separates this item from the 121 mm single-A 12V Lovol assembly even though both use the matching product build family.

Wholesale, OEM/ODM and Private-Label A/C Compressor Supply

Distributors, importers and fleet supply programs may request OEM/ODM cooperation, private labeling and unbranded cartons. Wholesale planning baseline normally starts at 50–100 pieces, with a 7–15 day production-planning window and an 18-month warranty. A final buyer quote follows the confirmed configuration and destination requirements.

Original-Unit Comparison for Fleet A/C Compressor Replacement

A buyer can reduce variant-mix risk by using one minimum photo and measurement task: measure the 132 mm clutch and compare excavator mounting points and hose position. The 20660222 reference gives purchasing teams a searchable starting point, but it still needs to be checked together with 10S11A, 12V, A1 132mm and the physical layout.

The refrigerant is not stated in the available product information. Do not infer it from another 10S11A version; confirm the vehicle or equipment A/C system before charging. The service team should investigate why the previous compressor failed and correct contamination, restriction or oil-balance issues during pre-installation checks. A correct part number cannot compensate for an A/C circuit that remains dirty or mechanically restricted.

Variant Control for Importers Handling construction equipment Compressors

This product should be stored as a complete assembly and counted separately from clutches, coils, pulleys and repair parts. The item image, application line and single-A 132 mm 12V large-pulley package description should stay together through commercial quote, packing and receiving.

In a mixed order for Lovol compact excavator, single-A 132 mm 12V large-pulley package is the configuration marker that sales, packing and receiving teams can all use. To connect the commercial record with the hardware, measure the 132 mm clutch and compare excavator mounting points and hose position. With those details fixed, a custom-label program can associate 10S11A, 12V and A1 132mm with the correct artwork and buyer code. The larger 132 mm pulley separates this item from the 121 mm single-A 12V Lovol assembly even though both use the identical compressor configuration family.

For wholesalers, single-A 132 mm 12V large-pulley package is more than a technical phrase; it is the boundary of this stock item. The larger 132 mm pulley separates this item from the 121 mm single-A 12V Lovol assembly even though both use the same supplied unit family. The same description should appear in the inquiry response, buyer confirmation and warehouse note. When those three documents use the same identity, the risk of packing a neighboring 10S11A version drops and customer-label artwork can be prepared against the correct assembly.

10S11A A/C Compressor Specification for B2B Buyers

RFQ Completion Guide for This Heavy-Duty A/C Compressor

For RFQ response, share the application, 10S11A, 12V, A1 132mm, photos from several angles and the expected commercial volume. Importers should also state whether they need neutral cartons, buyer branding, barcode labels or inspection documents. This prevents commercial details from being discussed against the wrong compressor.

Wholesale Questions about the Lovol compact excavator Heavy-Duty A/C Compressor

What should a distributor confirm before ordering this 10S11A A/C compressor?

Anchor the initial review to this distinguishing feature: single-A 132 mm 12V large-pulley package. Then measure the 132 mm clutch and compare excavator mounting points and hose position. The 10S11A casting alone does not close the fitment question, because this version combines 12V, A1 132mm and a particular physical layout for Lovol compact excavator. Include those observations and the required unit count in the inquiry so the response addresses this complete unit.

Can an importer substitute another 10S11A heavy-duty A/C compressor?

Do not approve the neighboring build simply because its unit appears within the 10S11A family. The larger 132 mm pulley separates this item from the 121 mm single-A 12V Lovol assembly even though both use the equivalent build family. The procurement group needs agreement on the coil supply, clutch drive, line-entry geometry and installation-foot arrangement. Each mismatch moves the compressor to a separate SKU that deserves its own photograph, carton mark and quoted line.

Which photos help Elecdura verify this Lovol compact excavator A/C compressor?

Begin the photo set with a centered pulley view so its groove form can be counted, then capture the connector, port block and every fixing point from useful side and rear angles. For this Lovol compact excavator request, give special attention to single-A 132 mm 12V large-pulley package. The resulting views let engineering assess the real geometry instead of extrapolating from a broad vehicle description.

Is this heavy-duty A/C compressor available for private-label orders?

A buyer-label program can be reviewed once single-A 132 mm 12V large-pulley package and the rest of the assembly identity have been approved. Elecdura's normal trade-program planning range is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. Send the label artwork, barcode structure and carton specification, inspection expectations and destination early enough for them to appear in the quotation sheet.

How should a fleet buyer check voltage and pulley before requesting an A/C compressor quotation?

The assembly in this offer has 12V and A1 132mm. Check the electrical system on the vehicle, inspect any old clutch marking and measure the pulley from consistent points rather than estimating from a photograph. Measure the 132 mm clutch and compare excavator mounting points and hose position. A correct family body fitted with the wrong clutch setup still creates a non-fitting replacement and preventable workshop delay.

What packaging information should a wholesaler include in the RFQ for this A/C compressor?

Custom-label packing can be evaluated once single-A 132 mm 12V large-pulley package and the rest of the assembly identity have been approved. Elecdura's normal commercial planning framework is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. Provide branding artwork, barcode format and box requirements, inspection expectations and destination early enough for them to appear in the formal quote.