80660021 10SA11 Heavy-Duty A/C Compressor for Foton Aumark / Forland

Sourcing the Right Foton Aumark / Forland light truck Heavy-Duty A/C Compressor

This 10SA11 unit is offered as a complete vehicle A/C compressor unit assembly for Foton Aumark / Forland light truck, not as a loose clutch, pulley or repair component. The 12V electrical system and A1 115mm drive describe the version being quoted. The centered single-A drive is the main separator from the PV4 four-ear Foton light-truck units.

10SA11 A/C Compressor Stock Control for Distributors

Importers should keep this compressor in its own SKU lane with the voltage and pulley printed beside the application. Similar 10SA11 castings may share external dimensions while using a different clutch, connector, port direction or bracket. A separate image and configuration line reduces picking errors during repeat orders.

In a mixed order for Foton Aumark / Forland light truck, center-position single-A 115 mm four-ear build is the configuration marker that sales, packing and receiving teams can all use. The comparison task is equally concrete: inspect the centered clutch position and four bracket contact points, then measure 115 mm. The same checkpoints can be reused at buyer quote, pre-shipment inspection and receiving, keeping 10SA11, 12V and A1 115mm tied to one build. The centered single-A drive is the main separator from the PV4 four-ear Foton light-truck units.

For this Foton Aumark / Forland light truck line, the buying conversation should stay anchored to center-position single-A 115 mm four-ear build. That focus is useful at three stages: sales can quote the intended build, warehouse staff can receive the correct carton, and the workshop can compare the old compressor without interpreting an ambiguous family name. The centered single-A drive is the main separator from the PV4 four-ear Foton light-truck units. A regional distributor that records these distinctions once can handle repeat orders faster while protecting the fleet customer from avoidable fitment delays.

A/C Compressor Configuration Sheet for Importers

What Fleet Service Teams Should Match on the Original Compressor

The old unit should remain on the bench until the buyer has completed one physical comparison: inspect the centered clutch position and four bracket contact points, then measure 115 mm. This is especially important for fleets that source the same 10SA11 body across several vehicle makes. The 80660021 reference gives purchasing teams a searchable starting point, but it still needs to be checked together with 10SA11, 12V, A1 115mm and the physical layout.

The refrigerant is not stated in the available product information. Do not infer it from another 10SA11 version; confirm the vehicle or equipment A/C system before charging. Keep the ports capped until the workshop is ready, protect the clutch from impact and do not carry the assembly by its wire. Good receiving and handling practice preserves the configuration that the import program ordered.

Buyer Information Needed for an Accurate A/C Compressor Quotation

A useful RFQ includes the vehicle or equipment model, engine when known, voltage, pulley groove count, clutch diameter, clear front/rear/side photos and any readable OE reference. Add the required quantity, destination port, packaging preference and delivery window. This gives the buyer quote team enough information to compare the request with the exact compressor.

Wholesale Packaging and Private-Label A/C Compressor Supply for Foton Aumark / Forland light truck

For bulk orders, buyers can request neutral cartons or an own-brand presentation after the compressor identity is locked. The usual planning range is 50–100 pieces, with a 7–15 day shipment target and an 18-month warranty. Mixed configurations should be listed as separate RFQ lines rather than combined under one model name.

Wholesale Questions about the Foton Aumark / Forland light truck Heavy-Duty A/C Compressor

What should a distributor confirm before ordering this 10SA11 A/C compressor?

Lead the inquiry with the feature that separates this item: center-position single-A 115 mm four-ear build. Then inspect the centered clutch position and four mount locations, then measure 115 mm. The 10SA11 casting alone does not close the fitment question, because this version combines 12V, A1 115mm and a particular physical layout for Foton Aumark / Forland light truck. Include those observations and the intended bulk quantity in the inquiry so the response addresses this complete unit.

Can an importer substitute another 10SA11 heavy-duty A/C compressor?

A nearby configuration is not an automatic substitute simply because its casting resembles the 10SA11 family. The centered single-A drive is the main separator from the PV4 four-ear Foton light-truck units. The trade purchaser needs agreement on the clutch voltage, clutch drive, hose connection and attachment-point layout. Each mismatch moves the compressor to a separate SKU that deserves its own photograph, carton mark and quoted line.

Which photos help Elecdura verify this Foton Aumark / Forland light truck A/C compressor?

Record a level front view of the clutch and pulley so its groove form can be counted, then capture the connector, port block and every fixing point from useful side and rear angles. For this Foton Aumark / Forland light truck request, give special attention to center-position single-A 115 mm four-ear build. These angles present the real build for technical comparison instead of extrapolating from a broad vehicle description.

Is this heavy-duty A/C compressor available for private-label orders?

Private-label carton work can begin once center-position single-A 115 mm four-ear build and the rest of the assembly identity have been approved. Elecdura's normal trade-program planning range is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. Attach the label design, barcode standard and packing request, inspection expectations and destination early enough for them to appear in the commercial response.

How should a fleet buyer check voltage and pulley before requesting an A/C compressor quotation?

The specified unit uses 12V and A1 115mm. Check the electrical system on the vehicle, inspect any old clutch marking and measure the pulley from consistent points rather than estimating from a photograph. Inspect the centered clutch position and four body attachment points, then measure 115 mm. A matching case that does not agree on coil and belt path still creates a non-fitting replacement and preventable workshop delay.

What packaging information should a wholesaler include in the RFQ for this A/C compressor?

Distributor-branded packaging can be prepared once center-position single-A 115 mm four-ear build and the rest of the assembly identity have been approved. Elecdura's normal wholesale planning baseline is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. Supply the artwork, barcode rules and packing brief, inspection expectations and destination early enough for them to appear in the RFQ reply.