80660204 10S11A Heavy-Duty A/C Compressor for Lovol

Matching the Single-A 121 mm 12V small-pulley package Heavy-Duty A/C Compressor

The purchasing case for this Lovol compact excavator compressor starts with three concrete checkpoints: 10S11A, 12V and A1 121mm. These details help wholesalers prevent easy to confuse visually assemblies from entering the same bin. It differs from the 132 mm 12V and 121 mm 24V Lovol versions; both diameter and coil voltage must match.

Distributor Comparison with Other 10S11A A/C Compressor Builds

For mixed-container orders, use a carton label that repeats the exact compressor arrangement and the buyer's own SKU. Do not let the 10S11A family name replace 12V and A1 121mm. Those omitted details are precisely where adjacent compressor variants diverge.

The most useful receiving instruction for this Lovol compact excavator compressor is to identify single-A 121 mm 12V small-pulley package before the carton enters inventory. For a repeat order, retain the earlier approval photos and again verify the compact excavator bracket, single-A clutch and small pulley during order review. This configuration record supports a defensible buying decision and stops 10S11A, 12V and A1 121mm from being detached from the actual compressor geometry. It differs from the 132 mm 12V and 121 mm 24V Lovol versions; both diameter and coil voltage must match.

A fleet service buyer may describe the need simply as a compressor for Lovol compact excavator, yet the order becomes actionable only when single-A 121 mm 12V small-pulley package is recorded. It differs from the 132 mm 12V and 121 mm 24V Lovol versions; both diameter and coil voltage must match. That difference affects belt alignment, electrical connection or physical installation, so it deserves a visible place in the supply quotation. Keeping the distinction in the item name also helps distributors answer repeat inquiries without rebuilding the fitment check from memory.

Vehicle and Equipment A/C Compressor Checks for Fleet Buyers

Verify the compact excavator bracket, single-A clutch and small pulley during order review. That comparison should be made from the same viewing angle used for the product image, because left/right clip positions and top/rear port descriptions can reverse when the compressor is turned. The 80660204 reference gives purchasing teams a searchable starting point, but it still needs to be checked together with 10S11A, 12V, A1 121mm and the physical layout.

The refrigerant is not stated in the available product information. Do not infer it from another 10S11A version; confirm the vehicle or equipment A/C system before charging. The replacement should be installed only after the belt path, hose reach, connector and mounting alignment are confirmed without forcing components into position. If any dimension differs, stop and compare the unit already fitted again.

Wholesale Data Table for the 10S11A A/C Compressor

Importer RFQ Notes for the Lovol compact excavator Compressor

The most effective inquiry combines physical proof and commercial requirements. Include the old-unit photos, label, voltage, pulley measurement, connector, ports, mount, quantity, destination and packaging request. If the buyer is replacing fleet stock, note whether the order is for one vehicle build or several configurations.

OEM Label, Neutral Pack and Bulk A/C Compressor Orders

Elecdura supports wholesale and aftermarket distributor programs with neutral packing, OEM label and ODM customization options. Standard commercial planning framework uses a 50–100 piece MOQ, a 7–15 day expected dispatch window after configuration approval, and an 18-month warranty. Final terms depend on order mix, packaging, inspection and destination.

Wholesale Questions about the Lovol compact excavator Heavy-Duty A/C Compressor

Why is the A1 121mm detail important to A/C compressor wholesalers?

Open the review with this stock-defining feature: single-A 121 mm 12V small-pulley package. Then verify the compact excavator bracket, single-A clutch and small pulley before commercial confirmation. The 10S11A casting alone does not close the fitment question, because this version combines 12V, A1 121mm and a particular physical layout for Lovol compact excavator. Include those observations and the buyer quantity in the inquiry so the response addresses this complete unit.

How can fleet workshops avoid a 12V A/C compressor mismatch?

Open the review with this stock-defining feature: single-A 121 mm 12V small-pulley package. Then verify the compact excavator bracket, single-A clutch and small pulley before commercial confirmation. The 10S11A casting alone does not close the fitment question, because this version combines 12V, A1 121mm and a particular physical layout for Lovol compact excavator. Include those observations and the line-item demand in the inquiry so the response addresses this complete unit.

Does the application name alone identify this heavy-duty A/C compressor?

An adjacent compressor cannot be approved simply because its unit appears within the 10S11A family. It differs from the 132 mm 12V and 121 mm 24V Lovol versions; both diameter and coil voltage must match. The parts-purchasing desk needs agreement on the rated voltage, clutch drive, connection head and body mounting pattern. A single differing detail requires a distinct stock identity that deserves its own photograph, carton mark and quoted line.

What does an importer need for a private-label A/C compressor quote?

Branded carton requirements can be discussed once single-A 121 mm 12V small-pulley package and the rest of the assembly identity have been approved. Elecdura's normal supply-planning reference is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. Submit label artwork together with barcode and packaging directions, inspection expectations and destination early enough for them to appear in the quotation sheet.

Can distributors order samples before a bulk A/C compressor program?

A sample can be discussed as a configuration-approval step before a bulk program, subject to availability and commercial terms. The buyer should still review single-A 121 mm 12V small-pulley package, 12V, A1 121mm, the connector, ports and mounting against the removed compressor. A sample approval applies only to that exact build and does not authorize substitution across the wider 10S11A family.

How are similar 10S11A A/C compressor variants kept separate?

Do not accept a related unit simply because its base body matches the 10S11A family. It differs from the 132 mm 12V and 121 mm 24V Lovol versions; both diameter and coil voltage must match. The trade purchaser needs agreement on the power-system match, clutch drive, hose-port arrangement and body mounting pattern. Any one of these differences calls for an independent SKU that deserves its own photograph, carton mark and quoted line.