80660205 10S11A Heavy-Duty A/C Compressor for Foton Lovol

10S11A Heavy-Duty A/C Compressor Buying Case for Foton Lovol compact excavator

Fleet service teams usually begin with an equipment name, but importers need a tighter record. Here, the practical ordering identity is Foton Lovol compact excavator, 10S11A, 12V and B1 120mm. The B-section pulley makes this unit materially different from the single-A 121 mm and 132 mm Lovol versions.

Distributor Fitment Checkpoints Beyond the Compressor Model

A buyer can reduce mismatch exposure by using one minimum photo and measurement task: check the B-section single groove, 120 mm clutch and excavator ear pattern. The 80660205 reference gives purchasing teams a searchable starting point, but it still needs to be checked together with 10S11A, 12V, B1 120mm and the physical layout.

The refrigerant is not stated in the available product information. Do not infer it from another 10S11A version; confirm the vehicle or equipment A/C system before charging. The service team should investigate why the previous compressor failed and correct contamination, restriction or oil-balance issues prior to fitment. A correct part number cannot compensate for an A/C circuit that remains dirty or mechanically restricted.

Fleet Downtime Risk from Ordering the Wrong A/C Compressor Variant

This product should be stored as a complete assembly and counted separately from clutches, coils, pulleys and repair parts. The item image, application line and single-B 120 mm 12V drive description should stay together through formal quote, packing and receiving.

A trade customer can shorten the approval cycle for Foton Lovol compact excavator by putting single-B 120 mm 12V drive at the front of the commercial description. For photo approval, ask the workshop to check the B-section single groove, 120 mm clutch and excavator ear pattern. The same checkpoints can be reused at RFQ response, pre-shipment inspection and receiving, keeping 10S11A, 12V and B1 120mm tied to one build. The B-section pulley makes this unit materially different from the single-A 121 mm and 132 mm Lovol versions.

For wholesalers, single-B 120 mm 12V drive is more than a technical phrase; it is the boundary of this stock item. The B-section pulley makes this unit materially different from the single-A 121 mm and 132 mm Lovol versions. The same description should appear in the inquiry response, buyer confirmation and warehouse note. When those three documents use the same identity, the risk of packing a neighboring 10S11A version drops and buyer-branded artwork can be prepared against the correct assembly.

Wholesale Specification Review: B1 120mm, 12V A/C Compressor

Private-Label Program Options for construction equipment A/C Compressors

Distributors, importers and fleet supply programs may request OEM/ODM cooperation, private labeling and non-branded packing. Trade-program planning range normally starts at 50–100 pieces, with a 7–15 day delivery-planning range and an 18-month warranty. A final RFQ reply follows the confirmed configuration and destination requirements.

RFQ Checklist for the 10S11A Heavy-Duty A/C Compressor

For commercial quote, attach the application, 10S11A, 12V, B1 120mm, photos from several angles and the expected buying volume. Importers should also state whether they need neutral cartons, buyer branding, barcode labels or inspection documents. This prevents commercial details from being discussed against the wrong compressor.

Wholesale Questions about the Foton Lovol compact excavator Heavy-Duty A/C Compressor

Why is the B1 120mm detail important to A/C compressor wholesalers?

Use this configuration marker as the first checkpoint: single-B 120 mm 12V drive. Then check the B-section single groove, 120 mm clutch and excavator ear pattern. The 10S11A casting alone does not close the fitment question, because this version combines 12V, B1 120mm and a particular physical layout for Foton Lovol compact excavator. Include those observations and the buyer quantity in the inquiry so the response addresses this complete unit.

How can fleet workshops avoid a 12V A/C compressor mismatch?

Begin with the characteristic that defines this SKU: single-B 120 mm 12V drive. Then check the B-section single groove, 120 mm clutch and excavator ear pattern. The 10S11A casting alone does not close the fitment question, because this version combines 12V, B1 120mm and a particular physical layout for Foton Lovol compact excavator. Include those observations and the required unit count in the inquiry so the response addresses this complete unit.

Does the application name alone identify this heavy-duty A/C compressor?

Do not release a similar family member simply because its casting resembles the 10S11A family. The B-section pulley makes this unit materially different from the single-A 121 mm and 132 mm Lovol versions. The sourcing staff needs agreement on the vehicle voltage, clutch drive, hose-port arrangement and fixing-point geometry. A single differing detail requires a distinct stock identity that deserves its own photograph, carton mark and quoted line.

What does an importer need for a private-label A/C compressor quote?

Customer-brand packaging can be planned once single-B 120 mm 12V drive and the rest of the assembly identity have been approved. Elecdura's normal procurement baseline is 50–100 pieces, a 7–15 day shipment target and an 18-month warranty. Send the label artwork, barcode structure and carton specification, inspection expectations and destination early enough for them to appear in the supply offer.

Can distributors order samples before a bulk A/C compressor program?

A sample can be discussed as a configuration-approval step before a bulk program, subject to availability and commercial terms. The buyer should still review single-B 120 mm 12V drive, 12V, B1 120mm, the connector, ports and mounting against the removed compressor. A sample approval applies only to that exact build and does not authorize substitution across the wider 10S11A family.

How are similar 10S11A A/C compressor variants kept separate?

Do not approve the neighboring build simply because its compressor is part of the 10S11A family. The B-section pulley makes this unit materially different from the single-A 121 mm and 132 mm Lovol versions. The parts-purchasing desk needs agreement on the electrical rating, clutch drive, hose connection and mount layout. Any mismatch among those checkpoints defines another SKU that deserves its own photograph, carton mark and quoted line.