DRT0260 Volkswagen Starter Motor 12V 1.7kW 10T

DRT0260 Volkswagen Starter Motor Wholesale Supply for Distributors

For distributors and fleet-parts buyers, DRT0260 identifies a 12V, 1.7kW, 10-tooth counterclockwise configuration for Volkswagen vehicles and equipment cross-referenced to DRT0260. Approve the complete reference, rating, drive end, mounting face, pinion and terminals against the removed unit or signed sample so a nearby version is not substituted into the purchasing line.

DRT0260 should enter a wholesale catalog only after the buyer links DRT0260 / 02M911024NX / STX200034 / 0001123014-R / LRS1674 / 943213231010 / 17972N to Volkswagen vehicles and equipment cross-referenced to DRT0260 and a verified sample. Record the mounting pattern, pinion reach, terminal clocking and rating label alongside the commercial terms. When another factory quotes the line, compare that complete record first; a lower price on an adjacent version does not represent the same purchasing outcome.

DRT0260 Starter Motor B2B Production and Test Video for Distributor Sourcing

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating DRT0260.

DRT0260 Starter Motor Distributor Specifications for Bulk Procurement

DRT0260 Starter Motor OE Cross-Reference Review for B2B Supply

Use DRT0260 as the primary purchasing reference and cross-check 02M911024NX, STX200034, 0001123014-R, LRS1674, 943213231010, 17972N. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

DRT0260 Starter Motor Bulk Fitment Approval for Aftermarket Buyers

Before accepting DRT0260 as a replacement, obtain the full vehicle, machine or engine record and compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement. Cross-reference overlap is useful for finding the family, but it cannot replace a physical match. Store the approved label and four-angle photo set with the account so later orders use the same configuration.

DRT0260 Starter Motor Wholesale Receiving Inspection for Fleet Replacement

Receiving control should link the carton, unit label and inspection sample to DRT0260. Verify reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability; photograph deviations and keep affected units separate while the supplier responds. Batch evidence makes repeat purchases more predictable and gives warranty teams a clear record if field feedback appears.

DRT0260 Starter Motor MOQ and Private-Label Supply for Wholesale Supply

DRT0260 Starter Motor Distributor FAQ for Distributor Sourcing

Which electrical and drive specifications define DRT0260?

The specified configuration is 12V, 1.7kW, 10-tooth counterclockwise configuration. Voltage must match the electrical system, while power, tooth count and rotation affect cranking performance and ring-gear engagement. Put all four values on the sample-approval sheet and verify the physical pinion before releasing a distributor quantity.

Why is suffix-level verification important for DRT0260?

Confirm the complete DRT0260 / 02M911024NX / STX200034 / 0001123014-R / LRS1674 / 943213231010 / 17972N group together with the 12V, 1.7kW, 10-tooth counterclockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What physical fitment checks are required for DRT0260?

Compare the equipment and engine document, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Inspect bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment document is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

What receiving checks protect a DRT0260 bulk order?

Tie every carton and sampled unit to DRT0260, the approved cross-reference set and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

Should a visually similar starter be sold as DRT0260?

A substitute is acceptable only when its complete OE relationship, 12V system, 1.7kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

What should be diagnosed before replacing a DRT0260 starter motor?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load prior to condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

How should a distributor request B2B pricing for DRT0260?

Send DRT0260 and all visible OE numbers, the full application or engine document, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

What approval sequence is recommended for DRT0260 procurement?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede batch release when fitment evidence is incomplete. Mark the approved sample with DRT0260, procurement team application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

What packaging options are available for DRT0260 distributors?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

Request a B2B Quote for DRT0260 Starter Motors

Send the complete reference, Volkswagen vehicles and equipment cross-referenced to DRT0260, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.