S00025086 Shangchai Starter Motor 24V 6.0kW 10T

S00025086 Heavy-Duty Starter Motor for SHANGCHAI SC7H125.1G3

For aftermarket product managers planning replenishment, this heavy-duty starter motor serves SHANGCHAI SC7H125.1G3 replacement demand under reference S00025086. Its 24V system, 6.0kW rating and 10T drive help importers and distributors identify the required version before discussing volume supply.

For engine-parts specialists preparing distributor pricing, the goal is a repeatable supply line: one agreed product identity, one packaging definition and one set of incoming checks. This is useful for importers building category coverage as well as fleet suppliers replenishing an existing starter reference.

S00025086 Starter Motor Specifications and Technical Drawing

For service-parts networks confirming the stated application, because no dimensional drawing is available for this version, the approved product views, full reference and 24V 6.0kW 10T specification should be compared with the starter being replaced. Customer measurements can then complete the fitment review without introducing unverified dimensions.

For importers checking application evidence, A dimensional drawing was not supplied for S00025086. For a fitment enquiry, provide straight-on images of the mounting face and drive end plus the locating diameter, hole spacing, pinion projection and terminal direction measured from the starter being replaced.

S00025086 Aftermarket Replacement and Application

For fleet-parts buyers comparing nearby starter versions, the replacement search starts with S00025086, S00025086+04 and the SHANGCHAI SC7H125.1G3 application. For mixed fleets or previously repaired machines, add clear old-unit photos so a substituted starter does not become the only fitment evidence.

For technical sales teams preparing a technical RFQ, start with the complete reference and application, then compare the 10T drive, flange shape and terminal orientation. A physical difference should be resolved before volume pricing is accepted.

S00025086 Wholesale Supply for Distributors and Importers

For sourcing managers defining label requirements, Elecdura supplies S00025086 for wholesale and distributor orders with a standard MOQ of 20 pcs, an indicative 7–15 day lead time after order confirmation and an 18-month warranty under agreed terms. Neutral packaging and private-label review are available for qualified programs.

For wholesale program managers confirming commercial terms, available quality support includes armature, solenoid, no-load and load testing. Buyers may define sampling, report format, reference labels, terminal protection and carton marks before production so the shipment can be checked against the approved order specification.

S00025086 Starter Motor Buyer FAQ

Which check should lead S00025086 locating face during an application review?

For purchasing teams preparing a technical RFQ, the S00025086 flange should sit flat against the SHANGCHAI SC7H125.1G3 mounting surface without being pulled into place by the bolts. Clean both faces and compare the locating shoulder, hole pattern and any stated diameters. Rocking, a visible gap or bolt misalignment indicates that the version check is incomplete and installation should stop.

Which specification deserves priority for S00025086 drive-end photograph before comparing delivery options?

For distributors checking version-defining data, the drive-end image for S00025086 should be used to count 10 teeth and compare the flange, locating shoulder and pinion rest position. Capture the existing starter with comparable framing and clear light. A profile photograph may not show the drive teeth and mounting points clearly; a frontal image is better for the final comparison.

What must be matched before quoting 10-tooth pinion identification when checking a replacement proposal?

For technical buyers comparing the flange and terminals, count all 10 teeth on the S00025086 pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

Which check should lead locating diameter when the starter removed from the machine is available?

For engine-parts specialists reviewing a replacement proposal, no locating diameter is published for S00025086. Measure the old starter at the flange shoulder with a caliper and photograph the measuring points. Combine that value with the hole pattern and pinion projection before quoting, because a visually close flange can still center the drive differently and should not inherit dimensions from another model.

What evidence best identifies S00025086 terminal access during an application review?

For fleet-parts buyers confirming the stated application, compare the rear housing and terminal direction in the approved product views for S00025086. The battery cable and start-signal lead must reach without sharp bends, rubbing or contact with hot and moving parts. If the body can be clocked differently within the same reference family, confirm the actual terminal position before stock is committed to the order.

Which specification deserves priority for S00025086, S00025086+04 before accepting a substitute?

For technical sales teams checking application evidence, S00025086, S00025086+04 should be treated as one inquiry group only after the starter being replaced is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate quote position instead of assuming that the shared number guarantees interchangeability.

What should receiving teams compare on axial reach for a documented fitment decision?

For fitment reviewers confirming electrical ratings, the source drawing does not provide a complete axial length for S00025086. Ask for measured pinion rest position, flange-to-drive distance and a square side photograph of the old unit. Keep those customer measurements with the 10T drive definition so an unstated length is not borrowed from a neighboring reference.

What should purchasing verify first for 24V and 6.0kW when confirming the quote position?

For application specialists checking repeat-order specifications, S00025086 is defined as 24V and 6.0kW. Confirm the machine electrical system and the old starter rating together, because system voltage decides whether the circuit is suitable while output level must suit the starting requirement. Battery condition, cable size and ground integrity should also suit this rating; a different voltage or output is a separate product, even when the housings appear similar.

Request a Wholesale Quote for S00025086 Heavy-Duty Starter Motor

For sales teams planning mixed-model inventory, to source S00025086 for a distributor or importer program, send the OE group, SHANGCHAI SC7H125.1G3, planned volume and destination. Elecdura will confirm the quoted starter configuration, commercial terms and available inspection support.